On Mon, Sep 30, 2019 at 8:04 AM Mateusz Holenko <[email protected]> wrote:
>
> From: Filip Kokosinski <[email protected]>
>
> Add documentation for LiteUART devicetree bindings.
>
> Signed-off-by: Filip Kokosinski <[email protected]>
> Signed-off-by: Mateusz Holenko <[email protected]>
> ---
> .../devicetree/bindings/serial/litex,liteuart.txt | 12 ++++++++++++
> MAINTAINERS | 6 ++++++
> 2 files changed, 18 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/serial/litex,liteuart.txt
Please make this a schema. See
Documentation/devicetree/writing-schema.rst (or .md before 5.4).
>
> diff --git a/Documentation/devicetree/bindings/serial/litex,liteuart.txt
> b/Documentation/devicetree/bindings/serial/litex,liteuart.txt
> new file mode 100644
> index 000000000..13c71a0c9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/litex,liteuart.txt
> @@ -0,0 +1,12 @@
> +LiteUART serial controller
> +
> +Required properties:
> +- compatible: should be "litex,liteuart"
Only 1 version?
> +- reg: base address and length of the register set for this device
Is there really no interrupt line? That should be added if there's h/w
support even if the driver doesn't yet support it.
> +
> +Example:
> +
> +uart0: serial@f0001000 {
Wrong unit address. Should be "@e0001800".
> + compatible = "litex,liteuart";
> + reg = <0xe0001800 0x100>;
> +};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b2326dece..65a6cf296 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9462,6 +9462,12 @@ F: Documentation/misc-devices/lis3lv02d.rst
> F: drivers/misc/lis3lv02d/
> F: drivers/platform/x86/hp_accel.c
>
> +LITEX PLATFORM
> +M: Karol Gugala <[email protected]>
> +M: Mateusz Holenko <[email protected]>
> +S: Maintained
> +F: Documentation/devicetree/bindings/serial/litex,liteuart.txt
> +
> LIVE PATCHING
> M: Josh Poimboeuf <[email protected]>
> M: Jiri Kosina <[email protected]>
> --
> 2.23.0
>
