Thanks for checking and pushing my patch ! Orito
> On Tue, 10 Sep 2019 at 03:39, Takao Orito <orito.ta...@socionext.com> wrote: > > > > The following patches add driver for SD Host controller on > > Socionext's Milbeaut M10V platforms. > > > > SD Host controller on Milbeaut consists of two controller parts. > > One is core controller F_SDH30, this is similar to sdhci-fujitsu > > controller. > > Another is bridge controller. This bridge controller is not compatible > > with sdhci-fujitsu controller. This is special for Milbeaut series. > > > > It has the several parts, > > - reset control > > - clock enable / select for SDR50/25/12 > > - hold control of DATA/CMD line > > - select characteristics for WP/CD/LED line > > - Re-tuning control for mode3 > > - Capability setting > > Timeout Clock / Base Clock / Timer Count for Re-Tuning / > > Debounce period > > These requires special procedures at reset or clock enable/change or > > further tuning of clock. > > > > Takao Orito (2): > > dt-bindings: mmc: add DT bindings for Milbeaut SD controller > > mmc: sdhci-milbeaut: add Milbeaut SD controller driver > > > > .../devicetree/bindings/mmc/sdhci-milbeaut.txt | 30 ++ > > drivers/mmc/host/Kconfig | 11 + > > drivers/mmc/host/Makefile | 1 + > > drivers/mmc/host/sdhci-milbeaut.c | 362 > > +++++++++++++++++++++ > > drivers/mmc/host/sdhci_f_sdh30.c | 26 +- > > drivers/mmc/host/sdhci_f_sdh30.h | 32 ++ > > 6 files changed, 437 insertions(+), 25 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt > > create mode 100644 drivers/mmc/host/sdhci-milbeaut.c > > create mode 100644 drivers/mmc/host/sdhci_f_sdh30.h > > > > -- > > 1.9.1 > > > > > > Applied for next, thanks! > > Kind regards > Uffe ----------------------------------------------------------------- Takao Orito Socionext Inc. E-mail:orito.ta...@socionext.com Tel:+81-80-9815-1460 -----------------------------------------------------------------
