From: wuxy <[email protected]> For Kukui project, the ov5695 vsync signal needs to be set to output,from ov5695 datasheet,the related register control methods as follows:
0x3002 Bit[7] FISIN/VSYNC output enable 0x3010 Bit[7] enable FISIN/VSYNC as GPIO controlled by register 0x3008 Bit[7] register control FISIN/VSYNC output TEST= boot to shell Signed-off-by: Xingyu Wu <[email protected]> --- drivers/media/i2c/ov5695.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/i2c/ov5695.c b/drivers/media/i2c/ov5695.c index 34b7046d9702..71f0eae6037b 100644 --- a/drivers/media/i2c/ov5695.c +++ b/drivers/media/i2c/ov5695.c @@ -300,6 +300,9 @@ static const struct regval ov5695_global_regs[] = { * mipi_datarate per lane 840Mbps */ static const struct regval ov5695_2592x1944_regs[] = { + {0x3002, 0x80}, + {0x3008, 0x80}, + {0x3010, 0x80}, {0x3501, 0x7e}, {0x366e, 0x18}, {0x3800, 0x00}, -- 2.17.1
