imx6dl-yapp4 Draco and Ursa boards use the I2C3 bus to control some external devices through the /dev files.
So enable the I2C3 bus on all board variants, not just on Hydra. Signed-off-by: Michal Vokáč <[email protected]> --- arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 2 +- arch/arm/boot/dts/imx6dl-yapp4-hydra.dts | 4 ---- 2 files changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index 663a72a96b6c..e2991a02f30f 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -308,7 +308,7 @@ clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; - status = "disabled"; + status = "okay"; oled: oled@3d { compatible = "solomon,ssd1305fb-i2c"; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts index f97927064750..264f9271895d 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts +++ b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts @@ -25,10 +25,6 @@ status = "okay"; }; -&i2c3 { - status = "okay"; -}; - &leds { status = "okay"; }; -- 2.1.4
