Pandora_wl1251_init_card was used to do special pdata based
setup of the sdio mmc interface. This does no longer work with
v4.7 and later. A fix requires a device tree based mmc3 setup.
Therefore we move the special setup to omap_hsmmc.c instead
of calling some pdata supplied init_card function.
The new code checks for a DT child node compatible to wl1251
so it will not affect other MMC3 use cases.
Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting
DMA channel")
Signed-off-by: H. Nikolaus Schaller <h...@goldelico.com>
Cc: <sta...@vger.kernel.org> # 4.7.0
---
drivers/mmc/host/omap_hsmmc.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 952fa4063ff8..03ba80bcf319 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1512,6 +1512,27 @@ static void omap_hsmmc_init_card(struct mmc_host *mmc,
struct mmc_card *card)
if (mmc_pdata(host)->init_card)
mmc_pdata(host)->init_card(card);
+ else if (card->type == MMC_TYPE_SDIO || card->type ==
MMC_TYPE_SD_COMBO) {
+ struct device_node *np = mmc_dev(mmc)->of_node;
+
+ np = of_get_compatible_child(np, "ti,wl1251");
+ if (np) {
+ /*
+ * We have TI wl1251 attached to MMC3. Pass this
information to
+ * SDIO core because it can't be probed by normal
methods.
+ */
+
+ dev_info(host->dev, "found wl1251\n");
+ card->quirks |= MMC_QUIRK_NONSTD_SDIO;
+ card->cccr.wide_bus = 1;
+ card->cis.vendor = 0x104c;
+ card->cis.device = 0x9066;
+ card->cis.blksize = 512;
+ card->cis.max_dtr = 24000000;
+ card->ocr = 0x80;
+ of_node_put(np);
+ }
+ }
}
static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
--
2.19.1
