Supplies for the various components in the SoC depends on board layout, so move the supply definitions to db820c.dtsi instead of carrying them in the platform dtsi.
Signed-off-by: Bjorn Andersson <[email protected]> --- arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 44 ++++++++++++++++++++ arch/arm64/boot/dts/qcom/msm8996.dtsi | 44 -------------------- 2 files changed, 44 insertions(+), 44 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 44ec3eb1c8e8..21e029afb27b 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -142,6 +142,10 @@ status = "okay"; }; +&camss { + vdda-supply = <&pm8994_l2>; +}; + &sdhc2 { /* External SD card */ pinctrl-names = "default", "sleep"; @@ -155,10 +159,28 @@ &ufsphy { status = "okay"; + + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; + + vdda-phy-max-microamp = <18380>; + vdda-pll-max-microamp = <9440>; + + vddp-ref-clk-supply = <&pm8994_l25>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; }; &ufshc { status = "okay"; + + vcc-supply = <&pm8994_l20>; + vccq-supply = <&pm8994_l25>; + vccq2-supply = <&pm8994_s4>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; }; &msmgpio { @@ -369,18 +391,31 @@ &pcie_phy { status = "okay"; + + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; }; &usb3phy { status = "okay"; + + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; + }; &hsusb_phy1 { status = "okay"; + + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; }; &hsusb_phy2 { status = "okay"; + + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; }; &usb3 { @@ -408,22 +443,31 @@ status = "okay"; perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&pm8994_l28>; }; &pcie1 { status = "okay"; perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; + vdda-supply = <&pm8994_l28>; }; &pcie2 { status = "okay"; perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; + vdda-supply = <&pm8994_l28>; }; &wcd9335 { clock-names = "mclk", "slimbus"; clocks = <&div1_mclk>, <&rpmcc RPM_SMD_BB_CLK1>; + + vdd-buck-supply = <&pm8994_s4>; + vdd-buck-sido-supply = <&pm8994_s4>; + vdd-tx-supply = <&pm8994_s4>; + vdd-rx-supply = <&pm8994_s4>; + vdd-io-supply = <&pm8994_s4>; }; &mdss { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 36f161547aa6..a297d3223161 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1322,16 +1322,6 @@ reg-names = "phy_mem"; #phy-cells = <0>; - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; - - vdda-phy-max-microamp = <18380>; - vdda-pll-max-microamp = <9440>; - - vddp-ref-clk-supply = <&pm8994_l25>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; - clock-names = "ref_clk_src", "ref_clk"; clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, <&gcc GCC_UFS_CLKREF_CLK>; @@ -1347,14 +1337,6 @@ phys = <&ufsphy>; phy-names = "ufsphy"; - vcc-supply = <&pm8994_l20>; - vccq-supply = <&pm8994_l25>; - vccq2-supply = <&pm8994_s4>; - - vcc-max-microamp = <600000>; - vccq-max-microamp = <450000>; - vccq2-max-microamp = <450000>; - power-domains = <&gcc UFS_GDSC>; clock-names = @@ -1456,9 +1438,6 @@ <&gcc GCC_PCIE_CLKREF_CLK>; clock-names = "aux", "cfg_ahb", "ref"; - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; - resets = <&gcc GCC_PCIE_PHY_BCR>, <&gcc GCC_PCIE_PHY_COM_BCR>, <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; @@ -1518,9 +1497,6 @@ <&gcc GCC_USB3_CLKREF_CLK>; clock-names = "aux", "cfg_ahb", "ref"; - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; - resets = <&gcc GCC_USB3_PHY_BCR>, <&gcc GCC_USB3PHY_PHY_BCR>; reset-names = "phy", "common"; @@ -1547,9 +1523,6 @@ <&gcc GCC_RX1_USB2_CLKREF_CLK>; clock-names = "cfg_ahb", "ref"; - vdda-pll-supply = <&pm8994_l12>; - vdda-phy-dpdm-supply = <&pm8994_l24>; - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; nvmem-cells = <&qusb2p_hstx_trim>; status = "disabled"; @@ -1564,9 +1537,6 @@ <&gcc GCC_RX2_USB2_CLKREF_CLK>; clock-names = "cfg_ahb", "ref"; - vdda-pll-supply = <&pm8994_l12>; - vdda-phy-dpdm-supply = <&pm8994_l24>; - resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; nvmem-cells = <&qusb2s_hstx_trim>; status = "disabled"; @@ -1770,7 +1740,6 @@ "vfe1_stream", "vfe_ahb", "vfe_axi"; - vdda-supply = <&pm8994_l2>; iommus = <&vfe_smmu 0>, <&vfe_smmu 1>, <&vfe_smmu 2>, @@ -1882,9 +1851,6 @@ pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>; pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>; - - vdda-supply = <&pm8994_l28>; - linux,pci-domain = <0>; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, @@ -1937,8 +1903,6 @@ pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>; pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>; - - vdda-supply = <&pm8994_l28>; linux,pci-domain = <1>; clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, @@ -1990,8 +1954,6 @@ pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>; pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >; - vdda-supply = <&pm8994_l28>; - linux,pci-domain = <2>; clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, <&gcc GCC_PCIE_2_AUX_CLK>, @@ -2056,12 +2018,6 @@ slim-ifc-dev = <&tasha_ifd>; - vdd-buck-supply = <&pm8994_s4>; - vdd-buck-sido-supply = <&pm8994_s4>; - vdd-tx-supply = <&pm8994_s4>; - vdd-rx-supply = <&pm8994_s4>; - vdd-io-supply = <&pm8994_s4>; - #sound-dai-cells = <1>; }; }; -- 2.23.0
