Hans Verkuil <hverk...@xs4all.nl> wrote on Mon [2019-Oct-21 12:38:03 +0200]:
> On 10/18/19 5:34 PM, Benoit Parrot wrote:
> > Apply Errata i913 every time the functional clock is enabled.
> > This should take care of suspend/resume case as well.
> >
> > Signed-off-by: Benoit Parrot <bpar...@ti.com>
> > Signed-off-by: Jyri Sarha <jsa...@ti.com>
> > ---
> > drivers/media/platform/ti-vpe/cal.c | 56 +++++++++++++++++++++++-
> > drivers/media/platform/ti-vpe/cal_regs.h | 27 ++++++++++++
> > 2 files changed, 82 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/media/platform/ti-vpe/cal.c
> > b/drivers/media/platform/ti-vpe/cal.c
> > index 62aeedb705e9..3cbc4dca6de8 100644
> > --- a/drivers/media/platform/ti-vpe/cal.c
> > +++ b/drivers/media/platform/ti-vpe/cal.c
> > @@ -284,6 +284,13 @@ static struct cal_data dra72x_cal_data = {
> > .flags = 0,
> > };
> >
> > +static struct cal_data dra72x_es1_cal_data = {
> > + .csi2_phy_core = dra72x_cal_csi_phy,
> > + .num_csi2_phy = ARRAY_SIZE(dra72x_cal_csi_phy),
> > +
> > + .flags = DRA72_CAL_PRE_ES2_LDO_DISABLE,
> > +};
> > +
> > /*
> > * there is one cal_dev structure in the driver, it is shared by
> > * all instances.
> > @@ -569,9 +576,52 @@ static void cal_get_hwinfo(struct cal_dev *dev)
> > hwinfo);
> > }
> >
> > +/*
> > + * Errata i913: CSI2 LDO Needs to be disabled when module is powered on
> > + *
> > + * Enabling CSI2 LDO shorts it to core supply. It is crucial the 2 CSI2
> > + * LDOs on the device are disabled if CSI-2 module is powered on
> > + * (0x4845 B304 | 0x4845 B384 [28:27] = 0x1) or in ULPS (0x4845 B304
> > + * | 0x4845 B384 [28:27] = 0x2) mode. Common concerns include: high
> > + * current draw on the module supply in active mode.
> > + *
> > + * Errata does not apply when CSI-2 module is powered off
> > + * (0x4845 B304 | 0x4845 B384 [28:27] = 0x0).
> > + *
> > + * SW Workaround:
> > + * Set the following register bits to disable the LDO,
> > + * which is essentially CSI2 REG10 bit 6:
> > + *
> > + * Core 0: 0x4845 B828 = 0x0000 0040
> > + * Core 1: 0x4845 B928 = 0x0000 0040
> > + */
> > +static void i913_errata(struct cal_dev *dev, unsigned int port)
> > +{
> > + u32 reg10 = reg_read(dev->cc[port], CAL_CSI2_PHY_REG10);
> > +
> > + set_field(®10, CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_DISABLE,
> > + CAL_CSI2_PHY_REG10_I933_LDO_DISABLE_MASK);
> > +
> > + cal_dbg(1, dev, "CSI2_%d_REG10 = 0x%08x\n", port, reg10);
> > + reg_write(dev->cc[port], CAL_CSI2_PHY_REG10, reg10);
> > +}
> > +
> > static inline int cal_runtime_get(struct cal_dev *dev)
>
> I'd drop the 'inline' here. It doesn't seem appropriate anymore since this
> function is now more complex.
Ok I'll fix that
Benoit
>
> Regards,
>
> Hans
>
> > {
> > - return pm_runtime_get_sync(&dev->pdev->dev);
> > + int r;
> > +
> > + r = pm_runtime_get_sync(&dev->pdev->dev);
> > +
> > + if (dev->flags & DRA72_CAL_PRE_ES2_LDO_DISABLE) {
> > + /*
> > + * Apply errata on both port eveytime we (re-)enable
> > + * the clock
> > + */
> > + i913_errata(dev, 0);
> > + i913_errata(dev, 1);
> > + }
> > +
> > + return r;
> > }
> >
> > static inline void cal_runtime_put(struct cal_dev *dev)
> > @@ -2071,6 +2121,10 @@ static const struct of_device_id cal_of_match[] = {
> > .compatible = "ti,dra72-cal",
> > .data = (void *)&dra72x_cal_data,
> > },
> > + {
> > + .compatible = "ti,dra72-pre-es2-cal",
> > + .data = (void *)&dra72x_es1_cal_data,
> > + },
> > {},
> > };
> > MODULE_DEVICE_TABLE(of, cal_of_match);
> > diff --git a/drivers/media/platform/ti-vpe/cal_regs.h
> > b/drivers/media/platform/ti-vpe/cal_regs.h
> > index 68cfc922b422..78d6f015c9ea 100644
> > --- a/drivers/media/platform/ti-vpe/cal_regs.h
> > +++ b/drivers/media/platform/ti-vpe/cal_regs.h
> > @@ -10,6 +10,30 @@
> > #ifndef __TI_CAL_REGS_H
> > #define __TI_CAL_REGS_H
> >
> > +/*
> > + * struct cal_dev.flags possibilities
> > + *
> > + * DRA72_CAL_PRE_ES2_LDO_DISABLE:
> > + * Errata i913: CSI2 LDO Needs to be disabled when module is powered on
> > + *
> > + * Enabling CSI2 LDO shorts it to core supply. It is crucial the 2 CSI2
> > + * LDOs on the device are disabled if CSI-2 module is powered on
> > + * (0x4845 B304 | 0x4845 B384 [28:27] = 0x1) or in ULPS (0x4845 B304
> > + * | 0x4845 B384 [28:27] = 0x2) mode. Common concerns include: high
> > + * current draw on the module supply in active mode.
> > + *
> > + * Errata does not apply when CSI-2 module is powered off
> > + * (0x4845 B304 | 0x4845 B384 [28:27] = 0x0).
> > + *
> > + * SW Workaround:
> > + * Set the following register bits to disable the LDO,
> > + * which is essentially CSI2 REG10 bit 6:
> > + *
> > + * Core 0: 0x4845 B828 = 0x0000 0040
> > + * Core 1: 0x4845 B928 = 0x0000 0040
> > + */
> > +#define DRA72_CAL_PRE_ES2_LDO_DISABLE BIT(0)
> > +
> > #define CAL_NUM_CSI2_PORTS 2
> >
> > /* CAL register offsets */
> > @@ -71,6 +95,7 @@
> > #define CAL_CSI2_PHY_REG0 0x000
> > #define CAL_CSI2_PHY_REG1 0x004
> > #define CAL_CSI2_PHY_REG2 0x008
> > +#define CAL_CSI2_PHY_REG10 0x028
> >
> > /* CAL Control Module Core Camerrx Control register offsets */
> > #define CM_CTRL_CORE_CAMERRX_CONTROL 0x000
> > @@ -458,6 +483,8 @@
> > #define CAL_CSI2_PHY_REG1_CLOCK_MISS_DETECTOR_STATUS_SUCCESS > > 0
> > #define CAL_CSI2_PHY_REG1_RESET_DONE_STATUS_MASK GENMASK(29, 28)
> >
> > +#define CAL_CSI2_PHY_REG10_I933_LDO_DISABLE_MASK BIT_MASK(6)
> > +
> > #define CAL_CSI2_PHY_REG2_CCP2_SYNC_PATTERN_MASK GENMASK(23, 0)
> > #define CAL_CSI2_PHY_REG2_TRIGGER_CMD_RXTRIGESC3_MASK
> > GENMASK(25, 24)
> > #define CAL_CSI2_PHY_REG2_TRIGGER_CMD_RXTRIGESC2_MASK
> > GENMASK(27, 26)
> >
>
