From: Roger Shimizu <[email protected]> commit 144e08abe80080c9c2cf0a06e40f1bc8150674eb upstream.
For kirkwood, gpio pins starts from 32 are in the 2nd bank, so it should be converted to "gpio1 <pin minus 32>" in dts file. e.g. gpio 40 should be "gpio1 8" Besides, a few other pin fixes for ls-wxl/wsxl, to match with mpp pin definition: - gpio-leds: "lswxl:blue:power" pin - gpio-leds: "lswxl:red:func" pin - gpio-leds: "lswxl:red:hdderr0" pin - gpio-leds: "lswxl:red:hdderr1" pin - gpio-fan: low/high/alarm pin The pin/bank issue was found when discussing Debian Bug #810894 [https://bugs.debian.org/810894#47] Fixes: e54e4b1b622e ("ARM: dts: add buffalo linkstation ls-wxl/wsxl") Reported-by: Arnaud Patard (Rtp) <[email protected]> Signed-off-by: Roger Shimizu <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- arch/arm/boot/dts/kirkwood-lswxl.dts | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) --- a/arch/arm/boot/dts/kirkwood-lswxl.dts +++ b/arch/arm/boot/dts/kirkwood-lswxl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WXL/WSXL * - * Copyright (C) 2015, [email protected] + * Copyright (C) 2015, 2016 + * Roger Shimizu <[email protected]> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -156,21 +157,21 @@ button@1 { label = "Function Button"; linux,code = <KEY_OPTION>; - gpios = <&gpio1 41 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; button@2 { label = "Power-on Switch"; linux,code = <KEY_RESERVED>; linux,input-type = <5>; - gpios = <&gpio1 42 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; button@3 { label = "Power-auto Switch"; linux,code = <KEY_ESC>; linux,input-type = <5>; - gpios = <&gpio1 43 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; @@ -185,12 +186,12 @@ led@1 { label = "lswxl:blue:func"; - gpios = <&gpio1 36 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; led@2 { label = "lswxl:red:alarm"; - gpios = <&gpio1 49 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; led@3 { @@ -200,23 +201,23 @@ led@4 { label = "lswxl:blue:power"; - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; }; led@5 { label = "lswxl:red:func"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; default-state = "keep"; }; led@6 { label = "lswxl:red:hdderr0"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; led@7 { label = "lswxl:red:hdderr1"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; @@ -225,15 +226,15 @@ pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; pinctrl-names = "default"; - gpios = <&gpio0 47 GPIO_ACTIVE_LOW - &gpio0 48 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW + &gpio1 15 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = <0 3 1500 2 3250 1 5000 0>; - alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; restart_poweroff { @@ -256,7 +257,7 @@ enable-active-high; regulator-always-on; regulator-boot-on; - gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; hdd_power0: regulator@2 { compatible = "regulator-fixed";
