i801_add_mux() fills in the GPIO lookup table by manually populating an array of gpiod_lookup structures. Use the existing GPIO_LOOKUP_IDX() helper macro instead, to relax a dependency on the gpiod_lookup structure's member names.
Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Lee Jones <[email protected]> --- v7: - Add Acked-by, v6: - New. --- drivers/mfd/sm501.c | 24 ++++++++---------------- 1 file changed, 8 insertions(+), 16 deletions(-) diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index e49787e6bb93e5c8..ccd62b963952814e 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -1145,22 +1145,14 @@ static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm, return -ENOMEM; lookup->dev_id = "i2c-gpio"; - if (iic->pin_sda < 32) - lookup->table[0].chip_label = "SM501-LOW"; - else - lookup->table[0].chip_label = "SM501-HIGH"; - lookup->table[0].chip_hwnum = iic->pin_sda % 32; - lookup->table[0].con_id = NULL; - lookup->table[0].idx = 0; - lookup->table[0].flags = GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN; - if (iic->pin_scl < 32) - lookup->table[1].chip_label = "SM501-LOW"; - else - lookup->table[1].chip_label = "SM501-HIGH"; - lookup->table[1].chip_hwnum = iic->pin_scl % 32; - lookup->table[1].con_id = NULL; - lookup->table[1].idx = 1; - lookup->table[1].flags = GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN; + lookup->table[0] = (struct gpiod_lookup) + GPIO_LOOKUP_IDX(iic->pin_sda < 32 ? "SM501-LOW" : "SM501-HIGH", + iic->pin_sda % 32, NULL, 0, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN); + lookup->table[1] = (struct gpiod_lookup) + GPIO_LOOKUP_IDX(iic->pin_scl < 32 ? "SM501-LOW" : "SM501-HIGH", + iic->pin_scl % 32, NULL, 1, + GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN); gpiod_add_lookup_table(lookup); icd = dev_get_platdata(&pdev->dev); -- 2.17.1
