Hello Krzysztof,
Thanks for the patch.
> -----Original Message-----
> From: Krzysztof Kozlowski <[email protected]>
> Sent: 11 May 2020 14:04
> To: Jonathan Cameron <[email protected]>; Hartmut Knaack
> <[email protected]>; Lars-Peter Clausen <[email protected]>; Peter Meerwald-
> Stadler <[email protected]>; Kukjin Kim <[email protected]>; Krzysztof
> Kozlowski <[email protected]>; [email protected]; linux-arm-
> [email protected]; [email protected]; linux-
> [email protected]
> Cc: Alim Akhtar <[email protected]>
> Subject: [PATCH] iio: adc: exynos: Simplify Exynos7-specific init
>
> The Exynos7-specific code bits in ADC driver do not play with PHY:
> the field exynos_adc_data.needs_adc_phy is not set in exynos7_adc_data
> instance. Therefore the initialization code does not have to check if it
is true.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
>
Reviewed-by: Alim Akhtar <[email protected]>
Tested on exynos7-espresso board so,
Tested-by: Alim Akhtar <[email protected]>
> ---
>
> Only build tested.
> ---
> drivers/iio/adc/exynos_adc.c | 3 ---
> 1 file changed, 3 deletions(-)
>
> diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index
> 22131a677445..219c8eb32d16 100644
> --- a/drivers/iio/adc/exynos_adc.c
> +++ b/drivers/iio/adc/exynos_adc.c
> @@ -449,9 +449,6 @@ static void exynos_adc_exynos7_init_hw(struct
> exynos_adc *info) {
> u32 con1, con2;
>
> - if (info->data->needs_adc_phy)
> - regmap_write(info->pmu_map, info->data->phy_offset, 1);
> -
> con1 = ADC_V2_CON1_SOFT_RESET;
> writel(con1, ADC_V2_CON1(info->regs));
>
> --
> 2.17.1
