The PRM (Power and Reset Module) has registers to enable and disable power domains, so let's update the binding for that.
Cc: [email protected] Cc: Rob Herring <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> --- Documentation/devicetree/bindings/arm/omap/prm-inst.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt --- a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt +++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt @@ -18,12 +18,16 @@ Required properties: (base address and length) Optional properties: +- #power-domain-cells: Should be 0 if the PRM instance is a power domain. - #reset-cells: Should be 1 if the PRM instance in question supports resets. +- clocks: Functional and interface clocks managed by the power domain +- clock-names: Names for the clocks using "fck" and "ick" naming Example: prm_dsp2: prm@1b00 { compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; reg = <0x1b00 0x40>; + #power-domain-cells = <0>; #reset-cells = <1>; }; -- 2.26.2
