On Wed 13 May 11:47 PDT 2020, [email protected] wrote:
> From: Michael Srba <[email protected]>
>
> On some msm8916 devices, attempts at initializing coresight cause the boot to
> fail. This was fixed by disabling the coresight-related nodes in the board dts
> files. However, a cleaner approach was chosen for fixing the same issue on
> msm8998: disabling coresight by default, and enabling it in board dts files
> where desired.
>
> This patch implements the same solution for msm8916, removes now redundant
> overwrites in board specific dts files and and enables coresight in db410c's
> board dts in order to keep the current behavior.
>
Applied, with Jeff's r-b.
Thanks,
Bjorn
> Fixes: b1fcc5702a41 ("arm64: dts: qcom: msm8916: Add CTI options")
> Signed-off-by: Michael Srba <[email protected]>
>
> ---
> arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 21 +++++++++++
> .../boot/dts/qcom/msm8916-longcheer-l8150.dts | 23 ------------
> .../qcom/msm8916-samsung-a2015-common.dtsi | 23 ------------
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 35 +++++++++++++++++++
> 4 files changed, 56 insertions(+), 46 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> index 14982762088d..07c150b0ed54 100644
> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> @@ -519,6 +519,27 @@ mpps@a000 {
> wcnss@a21b000 {
> status = "okay";
> };
> +
> + tpiu@820000 { status = "okay"; };
> + funnel@821000 { status = "okay"; };
> + replicator@824000 { status = "okay"; };
> + etf@825000 { status = "okay"; };
> + etr@826000 { status = "okay"; };
> + funnel@841000 { status = "okay"; };
> + debug@850000 { status = "okay"; };
> + debug@852000 { status = "okay"; };
> + debug@854000 { status = "okay"; };
> + debug@856000 { status = "okay"; };
> + etm@85c000 { status = "okay"; };
> + etm@85d000 { status = "okay"; };
> + etm@85e000 { status = "okay"; };
> + etm@85f000 { status = "okay"; };
> + cti@810000 { status = "okay"; };
> + cti@811000 { status = "okay"; };
> + cti@858000 { status = "okay"; };
> + cti@859000 { status = "okay"; };
> + cti@85a000 { status = "okay"; };
> + cti@85b000 { status = "okay"; };
> };
>
> usb2513 {
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
> b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
> index d1ccb9472c8b..691eb1a87bc9 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
> @@ -82,29 +82,6 @@ phy {
> wcnss@a21b000 {
> status = "okay";
> };
> -
> - /*
> - * Attempting to enable these devices causes a "synchronous
> - * external abort". Suspected cause is that the debug power
> - * domain is not enabled by default on this device.
> - * Disable these devices for now to avoid the crash.
> - *
> - * See:
> https://lore.kernel.org/linux-arm-msm/[email protected]/
> - */
> - tpiu@820000 { status = "disabled"; };
> - funnel@821000 { status = "disabled"; };
> - replicator@824000 { status = "disabled"; };
> - etf@825000 { status = "disabled"; };
> - etr@826000 { status = "disabled"; };
> - funnel@841000 { status = "disabled"; };
> - debug@850000 { status = "disabled"; };
> - debug@852000 { status = "disabled"; };
> - debug@854000 { status = "disabled"; };
> - debug@856000 { status = "disabled"; };
> - etm@85c000 { status = "disabled"; };
> - etm@85d000 { status = "disabled"; };
> - etm@85e000 { status = "disabled"; };
> - etm@85f000 { status = "disabled"; };
> };
>
> // FIXME: Use extcon device provided by charger driver when available
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
> b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
> index 43c5e0f882f1..af812f76e8be 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
> @@ -75,29 +75,6 @@ phy {
> wcnss@a21b000 {
> status = "okay";
> };
> -
> - /*
> - * Attempting to enable these devices causes a "synchronous
> - * external abort". Suspected cause is that the debug power
> - * domain is not enabled by default on this device.
> - * Disable these devices for now to avoid the crash.
> - *
> - * See:
> https://lore.kernel.org/linux-arm-msm/[email protected]/
> - */
> - tpiu@820000 { status = "disabled"; };
> - funnel@821000 { status = "disabled"; };
> - replicator@824000 { status = "disabled"; };
> - etf@825000 { status = "disabled"; };
> - etr@826000 { status = "disabled"; };
> - funnel@841000 { status = "disabled"; };
> - debug@850000 { status = "disabled"; };
> - debug@852000 { status = "disabled"; };
> - debug@854000 { status = "disabled"; };
> - debug@856000 { status = "disabled"; };
> - etm@85c000 { status = "disabled"; };
> - etm@85d000 { status = "disabled"; };
> - etm@85e000 { status = "disabled"; };
> - etm@85f000 { status = "disabled"; };
> };
>
> gpio-keys {
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 8b429954ea29..5cf117e247df 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -1228,6 +1228,8 @@ tpiu@820000 {
> clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> clock-names = "apb_pclk", "atclk";
>
> + status = "disabled";
> +
> in-ports {
> port {
> tpiu_in: endpoint {
> @@ -1244,6 +1246,8 @@ funnel@821000 {
> clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> clock-names = "apb_pclk", "atclk";
>
> + status = "disabled";
> +
> in-ports {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -1283,6 +1287,8 @@ replicator@824000 {
> clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> clock-names = "apb_pclk", "atclk";
>
> + status = "disabled";
> +
> out-ports {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -1317,6 +1323,8 @@ etf@825000 {
> clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> clock-names = "apb_pclk", "atclk";
>
> + status = "disabled";
> +
> in-ports {
> port {
> etf_in: endpoint {
> @@ -1341,6 +1349,8 @@ etr@826000 {
> clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> clock-names = "apb_pclk", "atclk";
>
> + status = "disabled";
> +
> in-ports {
> port {
> etr_in: endpoint {
> @@ -1357,6 +1367,8 @@ funnel@841000 { /* APSS funnel only 4 inputs are used */
> clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> clock-names = "apb_pclk", "atclk";
>
> + status = "disabled";
> +
> in-ports {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -1402,6 +1414,7 @@ debug@850000 {
> clocks = <&rpmcc RPM_QDSS_CLK>;
> clock-names = "apb_pclk";
> cpu = <&CPU0>;
> + status = "disabled";
> };
>
> debug@852000 {
> @@ -1410,6 +1423,7 @@ debug@852000 {
> clocks = <&rpmcc RPM_QDSS_CLK>;
> clock-names = "apb_pclk";
> cpu = <&CPU1>;
> + status = "disabled";
> };
>
> debug@854000 {
> @@ -1418,6 +1432,7 @@ debug@854000 {
> clocks = <&rpmcc RPM_QDSS_CLK>;
> clock-names = "apb_pclk";
> cpu = <&CPU2>;
> + status = "disabled";
> };
>
> debug@856000 {
> @@ -1426,6 +1441,7 @@ debug@856000 {
> clocks = <&rpmcc RPM_QDSS_CLK>;
> clock-names = "apb_pclk";
> cpu = <&CPU3>;
> + status = "disabled";
> };
>
> etm0: etm@85c000 {
> @@ -1438,6 +1454,8 @@ etm0: etm@85c000 {
>
> cpu = <&CPU0>;
>
> + status = "disabled";
> +
> out-ports {
> port {
> etm0_out: endpoint {
> @@ -1457,6 +1475,8 @@ etm1: etm@85d000 {
>
> cpu = <&CPU1>;
>
> + status = "disabled";
> +
> out-ports {
> port {
> etm1_out: endpoint {
> @@ -1476,6 +1496,8 @@ etm2: etm@85e000 {
>
> cpu = <&CPU2>;
>
> + status = "disabled";
> +
> out-ports {
> port {
> etm2_out: endpoint {
> @@ -1495,6 +1517,8 @@ etm3: etm@85f000 {
>
> cpu = <&CPU3>;
>
> + status = "disabled";
> +
> out-ports {
> port {
> etm3_out: endpoint {
> @@ -1512,6 +1536,8 @@ cti@810000 {
>
> clocks = <&rpmcc RPM_QDSS_CLK>;
> clock-names = "apb_pclk";
> +
> + status = "disabled";
> };
>
> /* CTI 1 - TPIU connections */
> @@ -1521,6 +1547,8 @@ cti@811000 {
>
> clocks = <&rpmcc RPM_QDSS_CLK>;
> clock-names = "apb_pclk";
> +
> + status = "disabled";
> };
>
> /* CTIs 2-11 - no information - not instantiated */
> @@ -1538,6 +1566,7 @@ cti@858000 {
> cpu = <&CPU0>;
> arm,cs-dev-assoc = <&etm0>;
>
> + status = "disabled";
> };
>
> /* CTI - CPU-1 */
> @@ -1551,6 +1580,8 @@ cti@859000 {
>
> cpu = <&CPU1>;
> arm,cs-dev-assoc = <&etm1>;
> +
> + status = "disabled";
> };
>
> /* CTI - CPU-2 */
> @@ -1564,6 +1595,8 @@ cti@85a000 {
>
> cpu = <&CPU2>;
> arm,cs-dev-assoc = <&etm2>;
> +
> + status = "disabled";
> };
>
> /* CTI - CPU-3 */
> @@ -1577,6 +1610,8 @@ cti@85b000 {
>
> cpu = <&CPU3>;
> arm,cs-dev-assoc = <&etm3>;
> +
> + status = "disabled";
> };
>
>
> --
> 2.24.0
>
