Although ocotp clock is always ON for i.MX6SL, OCOTP can be accessed directly, but since i.MX6SL nvmem interface is supported, and fsl,tempmon-data is deprecated, use it instead of getting fuse data by reading ocotp directly, this makes all i.MX6 SoCs aligned.
Signed-off-by: Anson Huang <[email protected]> --- arch/arm/boot/dts/imx6sl.dtsi | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 8230b45..fcb84fe 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -98,7 +98,8 @@ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gpc>; fsl,tempmon = <&anatop>; - fsl,tempmon-data = <&ocotp>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; }; @@ -961,6 +962,14 @@ cpu_speed_grade: speed-grade@10 { reg = <0x10 4>; }; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; }; audmux: audmux@21d8000 { -- 2.7.4
