On Fri, Mar 27, 2020 at 02:16:15PM -0700, Ashok Raj wrote:
> Root Complex Integrated devices (RCiEP) do not have a Root Port before the
> device. pci_configure_mps() should simply stick the max value for MaxPayload
> size in Device Control, and for MaxReadReq. Unless pcie=pcie_bus-peer2peer
> is used in kernel commandline PCIE_BUS_PEER2PEER.
> 
> When MPS is configured lower, it could result in reduced performance.
> 
> Fixes: 9dae3a97297f ("PCI: Move MPS configuration check to 
> pci_configure_device()")
> Signed-off-by: Ashok Raj <[email protected]>
> Tested-by: Dave Jiang <[email protected]>
> To: Bjorn Helgaas <[email protected]>
> To: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: Ashok Raj <[email protected]>

Applied to pci/enumeration for v5.8, thanks!

> ---
>  drivers/pci/probe.c | 23 ++++++++++++++++++++++-
>  1 file changed, 22 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index eeff8a07..a738b1c 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1895,13 +1895,34 @@ static void pci_configure_mps(struct pci_dev *dev)
>       struct pci_dev *bridge = pci_upstream_bridge(dev);
>       int mps, mpss, p_mps, rc;
>  
> -     if (!pci_is_pcie(dev) || !bridge || !pci_is_pcie(bridge))
> +     if (!pci_is_pcie(dev))
>               return;
>  
>       /* MPS and MRRS fields are of type 'RsvdP' for VFs, short-circuit out */
>       if (dev->is_virtfn)
>               return;
>  
> +     /*
> +      * If this is a Root Complex Integrated Endpoint
> +      * Simply program the max value from DEVCAP. No additional
> +      * Lookup is necessary
> +      */
> +     if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
> +             if (pcie_bus_config == PCIE_BUS_PEER2PEER)
> +                     mps = 128;
> +             else
> +                     mps = 128 << dev->pcie_mpss;
> +             rc = pcie_set_mps(dev, mps);
> +             if (rc) {
> +                     pci_warn(dev, "can't set Max Payload Size to %d; if 
> necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
> +                      mps);
> +                     return;
> +             }
> +     }
> +
> +     if (!bridge || !pci_is_pcie(bridge))
> +             return;
> +
>       mps = pcie_get_mps(dev);
>       p_mps = pcie_get_mps(bridge);
>  
> -- 
> 2.7.4
> 

Reply via email to