Add device node for the ath10k SNOC platform driver probe
and add resources required for WCN3990 on sc7180 soc.
Signed-off-by: Rakesh Pillai <pill...@codeaurora.org>
---
Changes from v8:
- Removed the qcom,msa-fixed-perm
---
arch/arm64/boot/dts/qcom/sc7180-idp.dts | 7 +++++++
arch/arm64/boot/dts/qcom/sc7180.dtsi | 27 +++++++++++++++++++++++++++
2 files changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 4e9149d..38b102e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -389,6 +389,13 @@
};
};
+&wifi {
+ status = "okay";
+ wifi-firmware {
+ iommus = <&apps_smmu 0xc2 0x1>;
+ };
+};
+
/* PINCTRL - additions to nodes defined in sc7180.dtsi */
&qspi_clk {
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index f1280e0..dd4e095 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -63,6 +63,11 @@
clock-frequency = <32764>;
#clock-cells = <0>;
};
+
+ wlan_fw_mem: memory@94100000 {
+ reg = <0 0x94100000 0 0x200000>;
+ no-map;
+ };
};
reserved_memory: reserved-memory {
@@ -944,6 +949,28 @@
};
};
+ wifi: wifi@18800000 {
+ compatible = "qcom,wcn3990-wifi";
+ reg = <0 0x18800000 0 0x800000>;
+ reg-names = "membase";
+ iommus = <&apps_smmu 0xc0 0x1>;
+ interrupts =
+ <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
+ <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
+ <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
+ memory-region = <&wlan_fw_mem>;
+ status = "disabled";
+ };
+
config_noc: interconnect@1500000 {
compatible = "qcom,sc7180-config-noc";
reg = <0 0x01500000 0 0x28000>;
--
2.7.4
