The Micron MT35XU512ABA flash does not support the quad enable bit. But
instead of programming the Quad Enable Require field to 000b ("Device
does not have a QE bit"), it is programmed to 111b ("Reserved").While this is technically incorrect, it is not reason enough to abort BFPT parsing. Instead, continue BFPT parsing assuming there is no quad enable bit present. Signed-off-by: Pratyush Yadav <[email protected]> --- drivers/mtd/spi-nor/sfdp.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c index 4e5e0eabe2d9..be9c6c3d6590 100644 --- a/drivers/mtd/spi-nor/sfdp.c +++ b/drivers/mtd/spi-nor/sfdp.c @@ -569,10 +569,6 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor, /* Quad Enable Requirements. */ switch (bfpt.dwords[BFPT_DWORD(15)] & BFPT_DWORD15_QER_MASK) { - case BFPT_DWORD15_QER_NONE: - params->quad_enable = NULL; - break; - case BFPT_DWORD15_QER_SR2_BIT1_BUGGY: /* * Writing only one byte to the Status Register has the @@ -609,8 +605,10 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor, params->quad_enable = spi_nor_sr2_bit1_quad_enable; break; + case BFPT_DWORD15_QER_NONE: default: - return -EINVAL; + params->quad_enable = NULL; + break; } /* Stop here if JESD216 rev B. */ -- 2.26.2
