Use the dt-bindings defines for qupv3_id_1 node's clocks.
Signed-off-by: Jonathan Marek <[email protected]>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 9c210fbac65e..04c9c215ffcd 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -292,7 +292,8 @@ qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
clock-names = "m-ahb", "s-ahb";
- clocks = <&gcc 133>, <&gcc 134>;
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -302,7 +303,7 @@ uart2: serial@a90000 {
compatible = "qcom,geni-debug-uart";
reg = <0x0 0x00a90000 0x0 0x4000>;
clock-names = "se";
- clocks = <&gcc 113>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
--
2.26.1
