Hi Jassi, On Wed, May 20, 2020 at 02:18:51PM +0530, Manivannan Sadhasivam wrote: > Hello, > > This series adds mailbox driver support for Qualcomm Inter Processor > Communications Controller (IPCC) block found in MSM chipsets. This block > is used to route interrupts between modems, DSPs and APSS (Application > Processor Subsystem). > > The driver is modeled as a mailbox+irqchip driver. The irqchip part helps > in receiving the interrupts from the IPCC clients such as modems, DSPs, > PCI-E etc... and forwards them to respective entities in APSS. > > On the other hand, the mailbox part is used to send interrupts to the IPCC > clients from the entities of APSS. > > This series is tested on SM8250-MTP board. >
Any update on this series? Thanks, Mani > Thanks, > Mani > > Changes in v3: > > * Added Bjorn's review tags > * Few changes to DT binding as suggested by Rob > > Changes in v2: > > * Moved from soc/ to mailbox/ > * Switched to static mbox channels > * Some misc cleanups > > Manivannan Sadhasivam (3): > dt-bindings: mailbox: Add devicetree binding for Qcom IPCC > mailbox: Add support for Qualcomm IPCC > MAINTAINERS: Add entry for Qualcomm IPCC driver > > .../bindings/mailbox/qcom-ipcc.yaml | 80 +++++ > MAINTAINERS | 8 + > drivers/mailbox/Kconfig | 10 + > drivers/mailbox/Makefile | 2 + > drivers/mailbox/qcom-ipcc.c | 286 ++++++++++++++++++ > include/dt-bindings/mailbox/qcom-ipcc.h | 33 ++ > 6 files changed, 419 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml > create mode 100644 drivers/mailbox/qcom-ipcc.c > create mode 100644 include/dt-bindings/mailbox/qcom-ipcc.h > > -- > 2.26.GIT >
