On Wed, 27 May 2020 18:17:42 -0500, Ricardo Rivera-Matos wrote: > The BQ2515X family of devices are highly integrated battery management > ICs that integrate the most common functions for wearable devices > namely a charger, an output voltage rail, ADC for battery and system > monitoring, and a push-button controller. > > Datasheets: > http://www.ti.com/lit/ds/symlink/bq25150.pdf > http://www.ti.com/lit/ds/symlink/bq25155.pdf > > Signed-off-by: Ricardo Rivera-Matos <[email protected]> > --- > .../bindings/power/supply/bq2515x.yaml | 91 +++++++++++++++++++ > 1 file changed, 91 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/power/supply/bq2515x.yaml >
My bot found errors running 'make dt_binding_check' on your patch: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/supply/bq2515x.example.dt.yaml: charger@6b: 'low-power-gpios' does not match any of the regexes: 'pinctrl-[0-9]+' See https://patchwork.ozlabs.org/patch/1299261 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
