Hi Hans, On Thu, 16 Apr 2020 11:35:41 +0200 Hans Verkuil <[email protected]> wrote:
I'm very sorry I missed a lot of your reviews in my V2, that wasn't on purpose. I'll fix this on the next iteration, sorry about that. Thank you very much for your review ! Maxime >+Helen Koike (rkisp1 maintainer) > >A quick review below... > >On 03/04/2020 16:21, Maxime Chevallier wrote: >> Introduce a driver for the camera interface on some Rockchip platforms. >> >> This controller supports CSI2, Parallel and BT656 interfaces, but for >> now only the parallel interface could be tested, hence it's the only one >> that's supported in the first version of this driver. >> >> This controller can be fond on PX30, RK1808, RK3128, RK3288 and RK3288, > >fond -> found > >'RK3288 and RK3288'? Typo? > >> but for now it's only be tested on PX30. >> >> Most of this driver was written follwing the BSP driver from rockchip, > >follwing -> following > >> removing the parts that either didn't fit correctly the guidelines, or >> that couldn't be tested. >> >> This basic version doesn't support cropping nor scaling, and is only >> designed with one sensor being attached to it a any time. > >a any -> at any > >Make sure you test with v4l2-compliance, in fact, I need to see the output >of 'v4l2-compliance -s' when you post v2. There shouldn't be any warnings >or fails. Make sure you build v4l2-compliance from the git repo >(https://git.linuxtv.org//v4l-utils.git) directly, that ensures that you >use the latest and greatest version. > >How does this driver compare to drivers/staging/media/rkisp1? Is the ISP >hardware completely different (it probably is, just checking)? > >How complex is the ISP hardware? This driver is a regular video driver, >but should it move to a media controller based driver instead, like rkisp1? > >I don't know the hardware, so I can't tell. > >> >> Signed-off-by: Maxime Chevallier <[email protected]> >> --- >> drivers/media/platform/Kconfig | 13 + >> drivers/media/platform/Makefile | 1 + >> drivers/media/platform/rockchip/cif/Makefile | 3 + >> drivers/media/platform/rockchip/cif/capture.c | 1170 +++++++++++++++++ >> drivers/media/platform/rockchip/cif/dev.c | 407 ++++++ >> drivers/media/platform/rockchip/cif/dev.h | 208 +++ >> drivers/media/platform/rockchip/cif/regs.h | 256 ++++ >> 7 files changed, 2058 insertions(+) >> create mode 100644 drivers/media/platform/rockchip/cif/Makefile >> create mode 100644 drivers/media/platform/rockchip/cif/capture.c >> create mode 100644 drivers/media/platform/rockchip/cif/dev.c >> create mode 100644 drivers/media/platform/rockchip/cif/dev.h >> create mode 100644 drivers/media/platform/rockchip/cif/regs.h >> >> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig >> index f65e98d3adf2..d2f413a99886 100644 >> --- a/drivers/media/platform/Kconfig >> +++ b/drivers/media/platform/Kconfig >> @@ -460,6 +460,19 @@ config VIDEO_ROCKCHIP_RGA >> >> To compile this driver as a module choose m here. >> >> +config VIDEO_ROCKCHIP_CIF >> + tristate "Rockchip Camera Interface" >> + depends on VIDEO_DEV && VIDEO_V4L2 >> + depends on ARCH_ROCKCHIP || COMPILE_TEST >> + select VIDEOBUF2_DMA_SG >> + select VIDEOBUF2_DMA_CONTIG >> + select V4L2_FWNODE >> + select V4L2_MEM2MEM_DEV >> + help >> + This is a v4l2 driver for Rockchip SOC Camera interface. >> + >> + To compile this driver as a module choose m here. >> + >> config VIDEO_TI_VPE >> tristate "TI VPE (Video Processing Engine) driver" >> depends on VIDEO_DEV && VIDEO_V4L2 >> diff --git a/drivers/media/platform/Makefile >> b/drivers/media/platform/Makefile >> index d13db96e3015..67e7ac034be1 100644 >> --- a/drivers/media/platform/Makefile >> +++ b/drivers/media/platform/Makefile >> @@ -68,6 +68,7 @@ obj-$(CONFIG_VIDEO_RENESAS_JPU) += rcar_jpu.o >> obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1/ >> >> obj-$(CONFIG_VIDEO_ROCKCHIP_RGA) += rockchip/rga/ >> +obj-$(CONFIG_VIDEO_ROCKCHIP_CIF) += rockchip/cif/ >> >> obj-y += omap/ >> >> diff --git a/drivers/media/platform/rockchip/cif/Makefile >> b/drivers/media/platform/rockchip/cif/Makefile >> new file mode 100644 >> index 000000000000..727990824316 >> --- /dev/null >> +++ b/drivers/media/platform/rockchip/cif/Makefile >> @@ -0,0 +1,3 @@ >> +# SPDX-License-Identifier: GPL-2.0 >> +obj-$(CONFIG_VIDEO_ROCKCHIP_CIF) += video_rkcif.o >> +video_rkcif-objs += dev.o capture.o >> diff --git a/drivers/media/platform/rockchip/cif/capture.c >> b/drivers/media/platform/rockchip/cif/capture.c >> new file mode 100644 >> index 000000000000..9df7757c6ed9 >> --- /dev/null >> +++ b/drivers/media/platform/rockchip/cif/capture.c >> @@ -0,0 +1,1170 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Rockchip CIF Driver >> + * >> + * Copyright (C) 2018 Rockchip Electronics Co., Ltd. >> + * Copyright (C) 2020 Maxime Chevallier <[email protected]> >> + */ >> + >> +#include <linux/delay.h> >> +#include <linux/pm_runtime.h> >> +#include <linux/reset.h> >> +#include <media/v4l2-common.h> >> +#include <media/v4l2-event.h> >> +#include <media/v4l2-fh.h> >> +#include <media/v4l2-fwnode.h> >> +#include <media/v4l2-ioctl.h> >> +#include <media/v4l2-mc.h> >> +#include <media/v4l2-subdev.h> >> +#include <media/videobuf2-dma-contig.h> >> + >> +#include "dev.h" >> +#include "regs.h" >> + >> +#define CIF_REQ_BUFS_MIN 1 >> +#define CIF_MIN_WIDTH 64 >> +#define CIF_MIN_HEIGHT 64 >> +#define CIF_MAX_WIDTH 8192 >> +#define CIF_MAX_HEIGHT 8192 >> + >> +#define RKCIF_PLANE_Y 0 >> +#define RKCIF_PLANE_CBCR 1 >> + >> +#define CIF_FETCH_Y_LAST_LINE(VAL) ((VAL) & 0x1fff) >> +/* Check if swap y and c in bt1120 mode */ >> +#define CIF_FETCH_IS_Y_FIRST(VAL) ((VAL) & 0xf) >> + >> +/* Get xsubs and ysubs for fourcc formats >> + * >> + * @xsubs: horizontal color samples in a 4*4 matrix, for yuv >> + * @ysubs: vertical color samples in a 4*4 matrix, for yuv >> + */ >> +static int fcc_xysubs(u32 fcc, u32 *xsubs, u32 *ysubs) >> +{ >> + switch (fcc) { >> + case V4L2_PIX_FMT_NV16: >> + case V4L2_PIX_FMT_NV61: >> + *xsubs = 2; >> + *ysubs = 1; >> + break; >> + case V4L2_PIX_FMT_NV21: >> + case V4L2_PIX_FMT_NV12: >> + *xsubs = 2; >> + *ysubs = 2; >> + break; >> + default: >> + return -EINVAL; >> + } >> + >> + return 0; >> +} >> + >> +static const struct cif_output_fmt out_fmts[] = { >> + { >> + .fourcc = V4L2_PIX_FMT_NV16, >> + .cplanes = 2, >> + .mplanes = 1, >> + .fmt_val = YUV_OUTPUT_422 | UV_STORAGE_ORDER_UVUV, >> + .bpp = { 8, 16 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_NV61, >> + .fmt_val = YUV_OUTPUT_422 | UV_STORAGE_ORDER_VUVU, >> + .cplanes = 2, >> + .mplanes = 1, >> + .bpp = { 8, 16 }, >> + }, >> + { >> + .fourcc = V4L2_PIX_FMT_NV12, >> + .fmt_val = YUV_OUTPUT_420 | UV_STORAGE_ORDER_UVUV, >> + .cplanes = 2, >> + .mplanes = 1, >> + .bpp = { 8, 16 }, >> + .mbus = MEDIA_BUS_FMT_UYVY8_2X8, >> + }, >> + { >> + .fourcc = V4L2_PIX_FMT_NV21, >> + .fmt_val = YUV_OUTPUT_420 | UV_STORAGE_ORDER_VUVU, >> + .cplanes = 2, >> + .mplanes = 1, >> + .bpp = { 8, 16 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_RGB24, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 24 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_RGB565, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 16 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_BGR666, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 18 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_SRGGB8, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 8 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_SGRBG8, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 8 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_SGBRG8, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 8 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_SBGGR8, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 8 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_SRGGB10, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 16 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_SGRBG10, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 16 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_SGBRG10, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 16 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_SBGGR10, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 16 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_SRGGB12, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 16 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_SGRBG12, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 16 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_SGBRG12, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 16 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_SBGGR12, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 16 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_SBGGR16, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 16 }, >> + }, { >> + .fourcc = V4L2_PIX_FMT_Y16, >> + .cplanes = 1, >> + .mplanes = 1, >> + .bpp = { 16 }, >> + } >> +}; >> + >> +static const struct cif_input_fmt in_fmts[] = { >> + { >> + .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, >> + .dvp_fmt_val = YUV_INPUT_422 | YUV_INPUT_ORDER_YUYV, >> + .csi_fmt_val = CSI_WRDDR_TYPE_YUV422, >> + .fmt_type = CIF_FMT_TYPE_YUV, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, >> + .dvp_fmt_val = YUV_INPUT_422 | YUV_INPUT_ORDER_YUYV, >> + .csi_fmt_val = CSI_WRDDR_TYPE_YUV422, >> + .fmt_type = CIF_FMT_TYPE_YUV, >> + .field = V4L2_FIELD_INTERLACED, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_YVYU8_2X8, >> + .dvp_fmt_val = YUV_INPUT_422 | YUV_INPUT_ORDER_YVYU, >> + .csi_fmt_val = CSI_WRDDR_TYPE_YUV422, >> + .fmt_type = CIF_FMT_TYPE_YUV, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_YVYU8_2X8, >> + .dvp_fmt_val = YUV_INPUT_422 | YUV_INPUT_ORDER_YVYU, >> + .csi_fmt_val = CSI_WRDDR_TYPE_YUV422, >> + .fmt_type = CIF_FMT_TYPE_YUV, >> + .field = V4L2_FIELD_INTERLACED, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_UYVY8_2X8, >> + .dvp_fmt_val = YUV_INPUT_422 | YUV_INPUT_ORDER_UYVY, >> + .csi_fmt_val = CSI_WRDDR_TYPE_YUV422, >> + .fmt_type = CIF_FMT_TYPE_YUV, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_UYVY8_2X8, >> + .dvp_fmt_val = YUV_INPUT_422 | YUV_INPUT_ORDER_UYVY, >> + .csi_fmt_val = CSI_WRDDR_TYPE_YUV422, >> + .fmt_type = CIF_FMT_TYPE_YUV, >> + .field = V4L2_FIELD_INTERLACED, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_VYUY8_2X8, >> + .dvp_fmt_val = YUV_INPUT_422 | YUV_INPUT_ORDER_VYUY, >> + .csi_fmt_val = CSI_WRDDR_TYPE_YUV422, >> + .fmt_type = CIF_FMT_TYPE_YUV, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_VYUY8_2X8, >> + .dvp_fmt_val = YUV_INPUT_422 | YUV_INPUT_ORDER_VYUY, >> + .csi_fmt_val = CSI_WRDDR_TYPE_YUV422, >> + .fmt_type = CIF_FMT_TYPE_YUV, >> + .field = V4L2_FIELD_INTERLACED, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8, >> + .dvp_fmt_val = INPUT_MODE_RAW | RAW_DATA_WIDTH_8, >> + .csi_fmt_val = CSI_WRDDR_TYPE_RAW8, >> + .fmt_type = CIF_FMT_TYPE_RAW, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8, >> + .dvp_fmt_val = INPUT_MODE_RAW | RAW_DATA_WIDTH_8, >> + .csi_fmt_val = CSI_WRDDR_TYPE_RAW8, >> + .fmt_type = CIF_FMT_TYPE_RAW, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8, >> + .dvp_fmt_val = INPUT_MODE_RAW | RAW_DATA_WIDTH_8, >> + .csi_fmt_val = CSI_WRDDR_TYPE_RAW8, >> + .fmt_type = CIF_FMT_TYPE_RAW, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8, >> + .dvp_fmt_val = INPUT_MODE_RAW | RAW_DATA_WIDTH_8, >> + .csi_fmt_val = CSI_WRDDR_TYPE_RAW8, >> + .fmt_type = CIF_FMT_TYPE_RAW, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10, >> + .dvp_fmt_val = INPUT_MODE_RAW | RAW_DATA_WIDTH_10, >> + .csi_fmt_val = CSI_WRDDR_TYPE_RAW10, >> + .fmt_type = CIF_FMT_TYPE_RAW, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10, >> + .dvp_fmt_val = INPUT_MODE_RAW | RAW_DATA_WIDTH_10, >> + .csi_fmt_val = CSI_WRDDR_TYPE_RAW10, >> + .fmt_type = CIF_FMT_TYPE_RAW, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10, >> + .dvp_fmt_val = INPUT_MODE_RAW | RAW_DATA_WIDTH_10, >> + .csi_fmt_val = CSI_WRDDR_TYPE_RAW10, >> + .fmt_type = CIF_FMT_TYPE_RAW, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10, >> + .dvp_fmt_val = INPUT_MODE_RAW | RAW_DATA_WIDTH_10, >> + .csi_fmt_val = CSI_WRDDR_TYPE_RAW10, >> + .fmt_type = CIF_FMT_TYPE_RAW, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_SBGGR12_1X12, >> + .dvp_fmt_val = INPUT_MODE_RAW | RAW_DATA_WIDTH_12, >> + .csi_fmt_val = CSI_WRDDR_TYPE_RAW12, >> + .fmt_type = CIF_FMT_TYPE_RAW, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_SGBRG12_1X12, >> + .dvp_fmt_val = INPUT_MODE_RAW | RAW_DATA_WIDTH_12, >> + .csi_fmt_val = CSI_WRDDR_TYPE_RAW12, >> + .fmt_type = CIF_FMT_TYPE_RAW, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_SGRBG12_1X12, >> + .dvp_fmt_val = INPUT_MODE_RAW | RAW_DATA_WIDTH_12, >> + .csi_fmt_val = CSI_WRDDR_TYPE_RAW12, >> + .fmt_type = CIF_FMT_TYPE_RAW, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_SRGGB12_1X12, >> + .dvp_fmt_val = INPUT_MODE_RAW | RAW_DATA_WIDTH_12, >> + .csi_fmt_val = CSI_WRDDR_TYPE_RAW12, >> + .fmt_type = CIF_FMT_TYPE_RAW, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_RGB888_1X24, >> + .csi_fmt_val = CSI_WRDDR_TYPE_RGB888, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_Y8_1X8, >> + .dvp_fmt_val = INPUT_MODE_RAW | RAW_DATA_WIDTH_8, >> + .csi_fmt_val = CSI_WRDDR_TYPE_RAW8, >> + .fmt_type = CIF_FMT_TYPE_RAW, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_Y10_1X10, >> + .dvp_fmt_val = INPUT_MODE_RAW | RAW_DATA_WIDTH_10, >> + .csi_fmt_val = CSI_WRDDR_TYPE_RAW10, >> + .fmt_type = CIF_FMT_TYPE_RAW, >> + .field = V4L2_FIELD_NONE, >> + }, { >> + .mbus_code = MEDIA_BUS_FMT_Y12_1X12, >> + .dvp_fmt_val = INPUT_MODE_RAW | RAW_DATA_WIDTH_12, >> + .csi_fmt_val = CSI_WRDDR_TYPE_RAW12, >> + .fmt_type = CIF_FMT_TYPE_RAW, >> + .field = V4L2_FIELD_NONE, >> + } >> +}; >> + >> +static const struct >> +cif_input_fmt *get_input_fmt(struct v4l2_subdev *sd) > >Don't put a linebreak after 'struct'. You can do this, though: > >static const struct cif_input_fmt * >get_input_fmt(struct v4l2_subdev *sd) > >However, the whole prototype is just 72 chars long, so just keep it >in one line. > >> +{ >> + struct v4l2_subdev_format fmt; >> + int ret; >> + u32 i; >> + >> + fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; >> + fmt.pad = 0; >> + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt); >> + if (ret < 0) { >> + v4l2_warn(sd->v4l2_dev, >> + "sensor fmt invalid, set to default size\n"); >> + goto set_default; >> + } >> + >> + for (i = 0; i < ARRAY_SIZE(in_fmts); i++) >> + if (fmt.format.code == in_fmts[i].mbus_code && >> + fmt.format.field == in_fmts[i].field) >> + return &in_fmts[i]; >> + >> + v4l2_err(sd->v4l2_dev, "remote sensor mbus code not supported\n"); >> + >> +set_default: >> + return NULL; >> +} >> + >> + static const struct > >Leading tab? I expect 'checkpatch.pl --strict' to catch that. Please run that >before posting v2. > >> +cif_output_fmt *find_output_fmt(struct rkcif_stream *stream, u32 pixelfmt) >> +{ >> + const struct cif_output_fmt *fmt; >> + u32 i; >> + >> + for (i = 0; i < ARRAY_SIZE(out_fmts); i++) { >> + fmt = &out_fmts[i]; >> + if (fmt->fourcc == pixelfmt) >> + return fmt; >> + } >> + >> + return NULL; >> +} >> + >> +/***************************** stream operations >> ******************************/ >> +static void rkcif_assign_new_buffer_oneframe(struct rkcif_stream *stream) >> +{ >> + struct rkcif_dummy_buffer *dummy_buf = &stream->dummy_buf; >> + struct rkcif_device *dev = stream->cifdev; >> + void __iomem *base = dev->base_addr; >> + >> + /* Set up an empty buffer for the next frame */ >> + spin_lock(&stream->vbq_lock); >> + if (!list_empty(&stream->buf_head)) { >> + stream->curr_buf = list_first_entry(&stream->buf_head, >> + struct rkcif_buffer, queue); >> + list_del(&stream->curr_buf->queue); >> + } else { >> + stream->curr_buf = NULL; >> + } >> + spin_unlock(&stream->vbq_lock); >> + >> + if (stream->curr_buf) { >> + write_cif_reg(base, CIF_FRM0_ADDR_Y, >> + stream->curr_buf->buff_addr[RKCIF_PLANE_Y]); >> + write_cif_reg(base, CIF_FRM0_ADDR_UV, >> + stream->curr_buf->buff_addr[RKCIF_PLANE_CBCR]); >> + write_cif_reg(base, CIF_FRM1_ADDR_Y, >> + stream->curr_buf->buff_addr[RKCIF_PLANE_Y]); >> + write_cif_reg(base, CIF_FRM1_ADDR_UV, >> + stream->curr_buf->buff_addr[RKCIF_PLANE_CBCR]); >> + } else { >> + write_cif_reg(base, CIF_FRM0_ADDR_Y, dummy_buf->dma_addr); >> + write_cif_reg(base, CIF_FRM0_ADDR_UV, dummy_buf->dma_addr); >> + write_cif_reg(base, CIF_FRM1_ADDR_Y, dummy_buf->dma_addr); >> + write_cif_reg(base, CIF_FRM1_ADDR_UV, dummy_buf->dma_addr); >> + } >> +} >> + >> +static void rkcif_stream_stop(struct rkcif_stream *stream) >> +{ >> + struct rkcif_device *cif_dev = stream->cifdev; >> + void __iomem *base = cif_dev->base_addr; >> + u32 val; >> + >> + val = read_cif_reg(base, CIF_CTRL); >> + write_cif_reg(base, CIF_CTRL, val & (~ENABLE_CAPTURE)); >> + write_cif_reg(base, CIF_INTEN, 0x0); >> + write_cif_reg(base, CIF_INTSTAT, 0x3ff); >> + write_cif_reg(base, CIF_FRAME_STATUS, 0x0); >> + >> + stream->state = RKCIF_STATE_READY; >> +} >> + >> +static int rkcif_queue_setup(struct vb2_queue *queue, >> + unsigned int *num_buffers, >> + unsigned int *num_planes, >> + unsigned int sizes[], >> + struct device *alloc_devs[]) >> +{ >> + struct rkcif_stream *stream = queue->drv_priv; >> + const struct v4l2_pix_format_mplane *pixm; >> + const struct cif_output_fmt *cif_fmt; >> + u32 i; >> + >> + pixm = &stream->pixm; >> + cif_fmt = stream->cif_fmt_out; >> + >> + if (*num_planes) { >> + if (*num_planes != cif_fmt->mplanes) >> + return -EINVAL; >> + >> + for (i = 0; i < cif_fmt->mplanes; i++) >> + if (sizes[i] < pixm->plane_fmt[i].sizeimage) >> + return -EINVAL; >> + return 0; >> + } >> + >> + *num_planes = cif_fmt->mplanes; >> + >> + for (i = 0; i < cif_fmt->mplanes; i++) { >> + const struct v4l2_plane_pix_format *plane_fmt; >> + >> + plane_fmt = &pixm->plane_fmt[i]; >> + sizes[i] = plane_fmt->sizeimage; >> + } >> + >> + return 0; >> +} >> + >> +/* >> + * The vb2_buffer are stored in rkcif_buffer, in order to unify >> + * mplane buffer and none-mplane buffer. >> + */ >> +static void rkcif_buf_queue(struct vb2_buffer *vb) >> +{ >> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); >> + struct rkcif_buffer *cifbuf = to_rkcif_buffer(vbuf); >> + struct vb2_queue *queue = vb->vb2_queue; >> + struct rkcif_stream *stream = queue->drv_priv; >> + struct v4l2_pix_format_mplane *pixm = &stream->pixm; >> + const struct cif_output_fmt *fmt = stream->cif_fmt_out; >> + unsigned long lock_flags = 0; >> + int i; >> + >> + memset(cifbuf->buff_addr, 0, sizeof(cifbuf->buff_addr)); >> + /* If mplanes > 1, every c-plane has its own m-plane, >> + * otherwise, multiple c-planes are in the same m-plane >> + */ >> + for (i = 0; i < fmt->mplanes; i++) >> + cifbuf->buff_addr[i] = vb2_dma_contig_plane_dma_addr(vb, i); >> + >> + if (fmt->mplanes == 1) { >> + for (i = 0; i < fmt->cplanes - 1; i++) >> + cifbuf->buff_addr[i + 1] = cifbuf->buff_addr[i] + >> + pixm->plane_fmt[i].bytesperline * pixm->height; >> + } >> + >> + spin_lock_irqsave(&stream->vbq_lock, lock_flags); >> + list_add_tail(&cifbuf->queue, &stream->buf_head); >> + spin_unlock_irqrestore(&stream->vbq_lock, lock_flags); >> +} >> + >> +static int rkcif_create_dummy_buf(struct rkcif_stream *stream) >> +{ > >Why do you need a dummy buffer? That's very unusual, so at the very least >this needs comments. > >> + struct rkcif_dummy_buffer *dummy_buf = &stream->dummy_buf; >> + struct rkcif_device *dev = stream->cifdev; >> + >> + /* get a maximum plane size */ >> + dummy_buf->size = max3(stream->pixm.plane_fmt[0].bytesperline * >> + stream->pixm.height, >> + stream->pixm.plane_fmt[1].sizeimage, >> + stream->pixm.plane_fmt[2].sizeimage); >> + >> + dummy_buf->vaddr = dma_alloc_coherent(dev->dev, dummy_buf->size, >> + &dummy_buf->dma_addr, >> + GFP_KERNEL); >> + if (!dummy_buf->vaddr) { >> + v4l2_err(&dev->v4l2_dev, >> + "Failed to allocate the memory for dummy buffer\n"); >> + return -ENOMEM; >> + } >> + >> + v4l2_info(&dev->v4l2_dev, "Allocate dummy buffer, size: 0x%08x\n", >> + dummy_buf->size); >> + >> + return 0; >> +} >> + >> +static void rkcif_destroy_dummy_buf(struct rkcif_stream *stream) >> +{ >> + struct rkcif_dummy_buffer *dummy_buf = &stream->dummy_buf; >> + struct rkcif_device *dev = stream->cifdev; >> + >> + dma_free_coherent(dev->dev, dummy_buf->size, >> + dummy_buf->vaddr, dummy_buf->dma_addr); >> +} >> + >> +static void rkcif_stop_streaming(struct vb2_queue *queue) >> +{ >> + struct rkcif_stream *stream = queue->drv_priv; >> + struct rkcif_device *dev = stream->cifdev; >> + struct rkcif_buffer *buf; >> + struct v4l2_subdev *sd; >> + int ret; >> + >> + stream->stopping = true; >> + ret = wait_event_timeout(stream->wq_stopped, >> + stream->state != RKCIF_STATE_STREAMING, >> + msecs_to_jiffies(1000)); >> + if (!ret) { >> + rkcif_stream_stop(stream); >> + stream->stopping = false; >> + } >> + pm_runtime_put(dev->dev); >> + >> + /* stop the sub device*/ >> + sd = dev->sensor.sd; >> + v4l2_subdev_call(sd, video, s_stream, 0); >> + v4l2_subdev_call(sd, core, s_power, 0); >> + >> + /* release buffers */ >> + if (stream->curr_buf) { >> + list_add_tail(&stream->curr_buf->queue, &stream->buf_head); >> + stream->curr_buf = NULL; >> + } >> + if (stream->next_buf) { >> + list_add_tail(&stream->next_buf->queue, &stream->buf_head); >> + stream->next_buf = NULL; >> + } >> + >> + while (!list_empty(&stream->buf_head)) { >> + buf = list_first_entry(&stream->buf_head, >> + struct rkcif_buffer, queue); >> + list_del(&buf->queue); >> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); >> + } >> + >> + rkcif_destroy_dummy_buf(stream); >> +} >> + >> +static u32 rkcif_determine_input_mode(struct rkcif_device *dev) >> +{ >> + struct rkcif_sensor_info *sensor_info = &dev->sensor; >> + struct rkcif_stream *stream = &dev->stream; >> + v4l2_std_id std; >> + u32 mode = INPUT_MODE_YUV; >> + int ret; >> + >> + ret = v4l2_subdev_call(sensor_info->sd, video, querystd, &std); >> + if (ret == 0) { >> + /* retrieve std from sensor if exist */ >> + switch (std) { >> + case V4L2_STD_NTSC: >> + mode = INPUT_MODE_NTSC; >> + break; >> + case V4L2_STD_PAL: >> + mode = INPUT_MODE_PAL; >> + break; >> + case V4L2_STD_ATSC: >> + mode = INPUT_MODE_BT1120; >> + break; > >Huh? V4L2_STD_* is only used for SDTV video receivers (i.e. Composite, S-Video, >analog TV). Sensors do not use it. So what is going on here? > >And V4L2_STD_ATSC is deprecated and should not be used in new drivers. > >> + default: >> + v4l2_err(&dev->v4l2_dev, >> + "std: %lld is not supported", std); > >Missing break. > >> + } >> + } else { >> + /* determine input mode by mbus_code (fmt_type) */ >> + switch (stream->cif_fmt_in->fmt_type) { >> + case CIF_FMT_TYPE_YUV: >> + mode = INPUT_MODE_YUV; >> + break; >> + case CIF_FMT_TYPE_RAW: >> + mode = INPUT_MODE_RAW; >> + break; >> + } >> + } >> + >> + return mode; >> +} >> + >> +static inline u32 rkcif_scl_ctl(struct rkcif_stream *stream) >> +{ >> + u32 fmt_type = stream->cif_fmt_in->fmt_type; >> + >> + return (fmt_type == CIF_FMT_TYPE_YUV) ? >> + ENABLE_YUV_16BIT_BYPASS : ENABLE_RAW_16BIT_BYPASS; >> +} >> + >> +static int rkcif_stream_start(struct rkcif_stream *stream) >> +{ >> + u32 val, mbus_flags, href_pol, vsync_pol, >> + xfer_mode = 0, yc_swap = 0, skip_top = 0; >> + struct rkcif_device *dev = stream->cifdev; >> + struct rkcif_sensor_info *sensor_info; >> + void __iomem *base = dev->base_addr; >> + >> + sensor_info = &dev->sensor; >> + stream->frame_idx = 0; >> + >> + mbus_flags = sensor_info->mbus.flags; >> + href_pol = (mbus_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) ? >> + HSY_HIGH_ACTIVE : HSY_LOW_ACTIVE; >> + vsync_pol = (mbus_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) ? >> + VSY_HIGH_ACTIVE : VSY_LOW_ACTIVE; >> + >> + if (rkcif_determine_input_mode(dev) == INPUT_MODE_BT1120) { >> + if (stream->cif_fmt_in->field == V4L2_FIELD_NONE) >> + xfer_mode = BT1120_TRANSMIT_PROGRESS; >> + else >> + xfer_mode = BT1120_TRANSMIT_INTERFACE; >> + if (!CIF_FETCH_IS_Y_FIRST(stream->cif_fmt_in->dvp_fmt_val)) >> + yc_swap = BT1120_YC_SWAP; >> + } >> + >> + val = vsync_pol | href_pol | rkcif_determine_input_mode(dev) | >> + stream->cif_fmt_out->fmt_val | stream->cif_fmt_in->dvp_fmt_val | >> + xfer_mode | yc_swap; >> + write_cif_reg(base, CIF_FOR, val); >> + val = stream->pixm.width; >> + if (stream->cif_fmt_in->fmt_type == CIF_FMT_TYPE_RAW) >> + val = stream->pixm.width * 2; >> + write_cif_reg(base, CIF_VIR_LINE_WIDTH, val); >> + write_cif_reg(base, CIF_SET_SIZE, >> + stream->pixm.width | (stream->pixm.height << 16)); >> + >> + v4l2_subdev_call(sensor_info->sd, sensor, g_skip_top_lines, &skip_top); >> + >> + write_cif_reg(base, CIF_CROP, skip_top << CIF_CROP_Y_SHIFT); >> + write_cif_reg(base, CIF_FRAME_STATUS, FRAME_STAT_CLS); >> + write_cif_reg(base, CIF_INTSTAT, INTSTAT_CLS); >> + write_cif_reg(base, CIF_SCL_CTRL, rkcif_scl_ctl(stream)); >> + >> + rkcif_assign_new_buffer_oneframe(stream); >> + >> + write_cif_reg(base, CIF_INTEN, FRAME_END_EN | LINE_ERR_EN | >> + PST_INF_FRAME_END); >> + >> + if (dev->chip_id == CHIP_RK1808_CIF && >> + rkcif_determine_input_mode(dev) == INPUT_MODE_BT1120) >> + write_cif_reg(base, CIF_CTRL, >> + AXI_BURST_16 | MODE_PINGPONG | ENABLE_CAPTURE); >> + else >> + write_cif_reg(base, CIF_CTRL, >> + AXI_BURST_16 | MODE_ONEFRAME | ENABLE_CAPTURE); >> + >> + stream->state = RKCIF_STATE_STREAMING; >> + >> + return 0; >> +} >> + >> +static int rkcif_start_streaming(struct vb2_queue *queue, unsigned int >> count) >> +{ >> + struct rkcif_stream *stream = queue->drv_priv; >> + struct rkcif_device *dev = stream->cifdev; >> + struct v4l2_device *v4l2_dev = &dev->v4l2_dev; >> + struct v4l2_subdev *sd; >> + int ret; >> + >> + if (WARN_ON(stream->state != RKCIF_STATE_READY)) { >> + ret = -EBUSY; >> + v4l2_err(v4l2_dev, "stream in busy state\n"); >> + goto destroy_buf; >> + } >> + >> + stream->cif_fmt_in = get_input_fmt(dev->sensor.sd); >> + >> + ret = rkcif_create_dummy_buf(stream); >> + if (ret < 0) { >> + v4l2_err(v4l2_dev, "Failed to create dummy_buf, %d\n", ret); >> + goto destroy_buf; >> + } >> + >> + ret = pm_runtime_get_sync(dev->dev); >> + if (ret < 0) { >> + v4l2_err(v4l2_dev, "Failed to get runtime pm, %d\n", ret); >> + goto destroy_dummy_buf; >> + } >> + >> + /* start sub-devices */ >> + sd = dev->sensor.sd; >> + ret = v4l2_subdev_call(sd, core, s_power, 1); >> + if (ret < 0 && ret != -ENOIOCTLCMD) >> + goto runtime_put; >> + ret = v4l2_subdev_call(sd, video, s_stream, 1); >> + if (ret < 0) >> + goto subdev_poweroff; >> + >> + ret = rkcif_stream_start(stream); >> + if (ret < 0) >> + goto stop_stream; >> + >> + return 0; >> + >> +stop_stream: >> + rkcif_stream_stop(stream); >> +subdev_poweroff: >> + v4l2_subdev_call(sd, core, s_power, 0); >> +runtime_put: >> + pm_runtime_put(dev->dev); >> +destroy_dummy_buf: >> + rkcif_destroy_dummy_buf(stream); >> +destroy_buf: >> + while (!list_empty(&stream->buf_head)) { >> + struct rkcif_buffer *buf; >> + >> + buf = list_first_entry(&stream->buf_head, >> + struct rkcif_buffer, queue); >> + list_del(&buf->queue); >> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED); >> + } >> + >> + return ret; >> +} >> + >> +static struct vb2_ops rkcif_vb2_ops = { >> + .queue_setup = rkcif_queue_setup, >> + .buf_queue = rkcif_buf_queue, >> + .wait_prepare = vb2_ops_wait_prepare, >> + .wait_finish = vb2_ops_wait_finish, >> + .stop_streaming = rkcif_stop_streaming, >> + .start_streaming = rkcif_start_streaming, >> +}; >> + >> +static int rkcif_init_vb2_queue(struct vb2_queue *q, >> + struct rkcif_stream *stream, >> + enum v4l2_buf_type buf_type) >> +{ >> + q->type = buf_type; >> + q->io_modes = VB2_MMAP | VB2_DMABUF; >> + q->drv_priv = stream; >> + q->ops = &rkcif_vb2_ops; >> + q->mem_ops = &vb2_dma_contig_memops; >> + q->buf_struct_size = sizeof(struct rkcif_buffer); >> + q->min_buffers_needed = CIF_REQ_BUFS_MIN; >> + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; >> + q->lock = &stream->vlock; >> + q->dev = stream->cifdev->dev; >> + >> + return vb2_queue_init(q); >> +} >> + >> +static void rkcif_set_fmt(struct rkcif_stream *stream, >> + struct v4l2_pix_format_mplane *pixm, >> + bool try) >> +{ >> + const struct cif_output_fmt *fmt; >> + struct v4l2_rect input_rect; >> + unsigned int imagesize = 0, planes; >> + u32 xsubs = 1, ysubs = 1, i; >> + >> + fmt = find_output_fmt(stream, pixm->pixelformat); >> + if (!fmt) >> + fmt = &out_fmts[0]; >> + >> + input_rect.width = CIF_MAX_WIDTH; >> + input_rect.height = CIF_MAX_HEIGHT; >> + >> + pixm->width = clamp_t(u32, pixm->width, >> + CIF_MIN_WIDTH, input_rect.width); >> + pixm->height = clamp_t(u32, pixm->height, >> + CIF_MIN_HEIGHT, input_rect.height); >> + >> + pixm->num_planes = fmt->mplanes; >> + pixm->quantization = V4L2_QUANTIZATION_DEFAULT; >> + pixm->colorspace = V4L2_COLORSPACE_SRGB; >> + >> + pixm->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pixm->colorspace); >> + pixm->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pixm->colorspace); > >This colorimetry information should come from the sensor subdev. That's the >only component that knows this. > >> + >> + pixm->pixelformat = fmt->fourcc; >> + pixm->field = V4L2_FIELD_NONE; >> + >> + /* calculate plane size and image size */ >> + fcc_xysubs(fmt->fourcc, &xsubs, &ysubs); >> + >> + planes = fmt->cplanes ? fmt->cplanes : fmt->mplanes; >> + >> + for (i = 0; i < planes; i++) { >> + struct v4l2_plane_pix_format *plane_fmt; >> + int width, height, bpl, size; >> + >> + if (i == 0) { >> + width = pixm->width; >> + height = pixm->height; >> + } else { >> + width = pixm->width / xsubs; >> + height = pixm->height / ysubs; >> + } >> + >> + bpl = width * fmt->bpp[i] / 8; >> + size = bpl * height; >> + imagesize += size; >> + >> + if (fmt->mplanes > i) { >> + /* Set bpl and size for each mplane */ >> + plane_fmt = pixm->plane_fmt + i; >> + plane_fmt->bytesperline = bpl; >> + plane_fmt->sizeimage = size; >> + } >> + } >> + >> + /* convert to non-MPLANE format. >> + * It's important since we want to unify non-MPLANE >> + * and MPLANE. >> + */ >> + if (fmt->mplanes == 1) >> + pixm->plane_fmt[0].sizeimage = imagesize; >> + >> + if (!try) { >> + stream->cif_fmt_out = fmt; >> + stream->pixm = *pixm; >> + } >> +} >> + >> +void rkcif_stream_init(struct rkcif_device *dev) >> +{ >> + struct rkcif_stream *stream = &dev->stream; >> + struct v4l2_pix_format_mplane pixm; >> + >> + memset(stream, 0, sizeof(*stream)); >> + memset(&pixm, 0, sizeof(pixm)); >> + stream->cifdev = dev; >> + >> + INIT_LIST_HEAD(&stream->buf_head); >> + spin_lock_init(&stream->vbq_lock); >> + stream->state = RKCIF_STATE_READY; >> + init_waitqueue_head(&stream->wq_stopped); >> + >> + /* Set default format */ >> + pixm.pixelformat = V4L2_PIX_FMT_NV12; >> + pixm.width = RKCIF_DEFAULT_WIDTH; >> + pixm.height = RKCIF_DEFAULT_HEIGHT; >> + rkcif_set_fmt(stream, &pixm, false); >> + >> + stream->crop.left = 0; >> + stream->crop.top = 0; >> + stream->crop.width = 10; >> + stream->crop.height = 10; > >I thought cropping wasn't supported yet? If that's indeed the case, then >just drop the 'crop' struct. > >> +} >> + >> +static int rkcif_fh_open(struct file *filp) >> +{ >> + struct video_device *vdev = video_devdata(filp); >> + struct rkcif_stream *stream = to_rkcif_stream(vdev); >> + struct rkcif_device *cifdev = stream->cifdev; >> + >> + rkcif_soft_reset(cifdev); > >Dubious. What happens if you are streaming and from another shell you >run 'v4l2-ctl -D -d /dev/videoX'? That will open the device and call >rkcif_soft_reset(). That doesn't sound safe. > >> + >> + return v4l2_fh_open(filp); >> +} >> + >> +static const struct v4l2_file_operations rkcif_fops = { >> + .open = rkcif_fh_open, >> + .release = vb2_fop_release, >> + .unlocked_ioctl = video_ioctl2, >> + .poll = vb2_fop_poll, >> + .mmap = vb2_fop_mmap, >> +}; >> + >> +static int rkcif_enum_input(struct file *file, void *priv, >> + struct v4l2_input *input) >> +{ >> + if (input->index > 0) >> + return -EINVAL; >> + >> + input->type = V4L2_INPUT_TYPE_CAMERA; >> + strlcpy(input->name, "Camera", sizeof(input->name)); > >Use strscpy instead of strcpy/strncpy/strlcpy. We standardized on that in the >media subsystem. > >> + >> + return 0; >> +} >> + >> +static int rkcif_try_fmt_vid_cap_mplane(struct file *file, void *fh, >> + struct v4l2_format *f) >> +{ >> + struct rkcif_stream *stream = video_drvdata(file); >> + >> + rkcif_set_fmt(stream, &f->fmt.pix_mp, true); >> + >> + return 0; >> +} >> + >> +static int rkcif_enum_fmt_vid_cap(struct file *file, void *priv, >> + struct v4l2_fmtdesc *f) >> +{ >> + const struct cif_output_fmt *fmt = NULL; >> + >> + if (f->index >= ARRAY_SIZE(out_fmts)) >> + return -EINVAL; >> + >> + fmt = &out_fmts[f->index]; >> + f->pixelformat = fmt->fourcc; >> + >> + return 0; >> +} >> + >> +static int rkcif_s_fmt_vid_cap_mplane(struct file *file, >> + void *priv, struct v4l2_format *f) >> +{ >> + struct rkcif_stream *stream = video_drvdata(file); >> + >> + rkcif_set_fmt(stream, &f->fmt.pix_mp, false); >> + >> + return 0; >> +} >> + >> +static int rkcif_g_fmt_vid_cap_mplane(struct file *file, void *fh, >> + struct v4l2_format *f) >> +{ >> + struct rkcif_stream *stream = video_drvdata(file); >> + >> + f->fmt.pix_mp = stream->pixm; >> + >> + return 0; >> +} >> + >> +static int rkcif_querycap(struct file *file, void *priv, >> + struct v4l2_capability *cap) >> +{ >> + struct rkcif_stream *stream = video_drvdata(file); >> + struct device *dev = stream->cifdev->dev; >> + >> + strlcpy(cap->driver, dev->driver->name, sizeof(cap->driver)); >> + strlcpy(cap->card, dev->driver->name, sizeof(cap->card)); >> + snprintf(cap->bus_info, sizeof(cap->bus_info), >> + "platform:%s", dev_name(dev)); >> + >> + return 0; >> +} >> + >> +static int rkcif_enum_framesizes(struct file *file, void *fh, >> + struct v4l2_frmsizeenum *fsize) >> +{ >> + struct rkcif_stream *stream = video_drvdata(file); >> + struct rkcif_device *dev = stream->cifdev; >> + struct v4l2_subdev_frame_size_enum fse = { >> + .index = fsize->index, >> + .which = V4L2_SUBDEV_FORMAT_ACTIVE, >> + }; >> + const struct cif_output_fmt *fmt; >> + int ret; >> + >> + if (!dev->sensor.sd) >> + return -EINVAL; >> + >> + fmt = find_output_fmt(stream, fsize->pixel_format); >> + if (!fmt) >> + return -EINVAL; >> + >> + fse.code = fmt->mbus; >> + >> + ret = v4l2_subdev_call(dev->sensor.sd, pad, enum_frame_size, >> + NULL, &fse); >> + if (ret) >> + return ret; >> + >> + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; >> + fsize->discrete.width = fse.max_width; >> + fsize->discrete.height = fse.max_height; >> + >> + return 0; >> +} >> + >> +static int rkcif_g_input(struct file *file, void *fh, unsigned int *i) >> +{ >> + *i = 0; >> + return 0; >> +} >> + >> +static int rkcif_s_input(struct file *file, void *fh, unsigned int i) >> +{ >> + if (i) >> + return -EINVAL; >> + >> + return 0; >> +} >> + >> +static const struct v4l2_ioctl_ops rkcif_v4l2_ioctl_ops = { >> + .vidioc_reqbufs = vb2_ioctl_reqbufs, >> + .vidioc_querybuf = vb2_ioctl_querybuf, >> + .vidioc_create_bufs = vb2_ioctl_create_bufs, >> + .vidioc_qbuf = vb2_ioctl_qbuf, >> + .vidioc_expbuf = vb2_ioctl_expbuf, >> + .vidioc_dqbuf = vb2_ioctl_dqbuf, >> + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, >> + .vidioc_streamon = vb2_ioctl_streamon, >> + .vidioc_streamoff = vb2_ioctl_streamoff, >> + >> + .vidioc_enum_fmt_vid_cap = rkcif_enum_fmt_vid_cap, >> + .vidioc_try_fmt_vid_cap_mplane = rkcif_try_fmt_vid_cap_mplane, >> + .vidioc_s_fmt_vid_cap_mplane = rkcif_s_fmt_vid_cap_mplane, >> + .vidioc_g_fmt_vid_cap_mplane = rkcif_g_fmt_vid_cap_mplane, >> + .vidioc_querycap = rkcif_querycap, >> + .vidioc_enum_framesizes = rkcif_enum_framesizes, >> + >> + .vidioc_enum_input = rkcif_enum_input, >> + .vidioc_g_input = rkcif_g_input, >> + .vidioc_s_input = rkcif_s_input, >> +}; >> + >> +void rkcif_unregister_stream_vdev(struct rkcif_device *dev) >> +{ >> + struct rkcif_stream *stream = &dev->stream; >> + >> + media_entity_cleanup(&stream->vdev.entity); >> + video_unregister_device(&stream->vdev); >> +} >> + >> +int rkcif_register_stream_vdev(struct rkcif_device *dev) >> +{ >> + struct rkcif_stream *stream = &dev->stream; >> + struct v4l2_device *v4l2_dev = &dev->v4l2_dev; >> + struct video_device *vdev = &stream->vdev; >> + int ret; >> + >> + strlcpy(vdev->name, CIF_VIDEODEVICE_NAME, sizeof(vdev->name)); >> + mutex_init(&stream->vlock); >> + >> + vdev->ioctl_ops = &rkcif_v4l2_ioctl_ops; >> + vdev->release = video_device_release_empty; >> + vdev->fops = &rkcif_fops; >> + vdev->minor = -1; >> + vdev->v4l2_dev = v4l2_dev; >> + vdev->lock = &stream->vlock; >> + vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE_MPLANE | >> + V4L2_CAP_STREAMING; >> + video_set_drvdata(vdev, stream); >> + vdev->vfl_dir = VFL_DIR_RX; >> + stream->pad.flags = MEDIA_PAD_FL_SINK; >> + >> + rkcif_init_vb2_queue(&stream->buf_queue, stream, >> + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE | >> + V4L2_BUF_TYPE_VIDEO_CAPTURE); >> + vdev->queue = &stream->buf_queue; >> + strscpy(vdev->name, KBUILD_MODNAME, sizeof(vdev->name)); >> + >> + ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1); > >Hmm, you aren't basing your code on the latest media git repo >(https://git.linuxtv.org//media_tree.git). > >VFL_TYPE_GRABBER was renamed to VFL_TYPE_VIDEO. > >> + if (ret < 0) { >> + v4l2_err(v4l2_dev, >> + "video_register_device failed with error %d\n", ret); >> + return ret; >> + } >> + >> + ret = media_entity_pads_init(&vdev->entity, 1, &stream->pad); >> + if (ret < 0) >> + goto unreg; >> + >> + return 0; >> +unreg: >> + video_unregister_device(vdev); >> + return ret; >> +} >> + >> +static void rkcif_vb_done_oneframe(struct rkcif_stream *stream, >> + struct vb2_v4l2_buffer *vb_done) >> +{ >> + const struct cif_output_fmt *fmt = stream->cif_fmt_out; >> + u32 i; >> + >> + /* Dequeue a filled buffer */ >> + for (i = 0; i < fmt->mplanes; i++) { >> + vb2_set_plane_payload(&vb_done->vb2_buf, i, >> + stream->pixm.plane_fmt[i].sizeimage); >> + } >> + vb_done->vb2_buf.timestamp = ktime_get_ns(); >> + vb2_buffer_done(&vb_done->vb2_buf, VB2_BUF_STATE_DONE); >> +} >> + >> +void rkcif_irq_oneframe(struct rkcif_device *cif_dev) >> +{ >> + struct rkcif_stream *stream = &cif_dev->stream; >> + u32 lastline, lastpix, ctl, cif_frmst, intstat; >> + void __iomem *base = cif_dev->base_addr; >> + >> + intstat = read_cif_reg(base, CIF_INTSTAT); >> + cif_frmst = read_cif_reg(base, CIF_FRAME_STATUS); >> + lastline = CIF_FETCH_Y_LAST_LINE(read_cif_reg(base, CIF_LAST_LINE)); >> + lastpix = read_cif_reg(base, CIF_LAST_PIX); >> + ctl = read_cif_reg(base, CIF_CTRL); >> + >> + /* There are two irqs enabled: >> + * - PST_INF_FRAME_END: cif FIFO is ready, this is prior to FRAME_END >> + * - FRAME_END: cif has saved frame to memory, a frame ready >> + */ >> + >> + if ((intstat & PST_INF_FRAME_END)) { >> + write_cif_reg(base, CIF_INTSTAT, PST_INF_FRAME_END_CLR); >> + >> + if (stream->stopping) >> + /* To stop CIF ASAP, before FRAME_END irq */ >> + write_cif_reg(base, CIF_CTRL, ctl & (~ENABLE_CAPTURE)); >> + } >> + >> + if ((intstat & LINE_ERR)) { >> + write_cif_reg(base, CIF_INTSTAT, LINE_ERR_CLR); >> + >> + if (stream->stopping) { >> + rkcif_stream_stop(stream); >> + stream->stopping = false; >> + wake_up(&stream->wq_stopped); >> + return; >> + } >> + >> + v4l2_err(&cif_dev->v4l2_dev, >> + "Bad frame, irq:0x%x frmst:0x%x size:%dx%d\n", >> + intstat, cif_frmst, lastline, lastpix); >> + /* Clear status to receive into the same buffer */ >> + write_cif_reg(base, CIF_FRAME_STATUS, FRM0_STAT_CLS); >> + return; >> + } >> + >> + >> + if ((intstat & FRAME_END)) { >> + struct vb2_v4l2_buffer *vb_done = NULL; >> + >> + write_cif_reg(base, CIF_INTSTAT, FRAME_END_CLR); >> + >> + if (stream->stopping) { >> + rkcif_stream_stop(stream); >> + stream->stopping = false; >> + wake_up(&stream->wq_stopped); >> + return; >> + } >> + >> + if (lastline != stream->pixm.height || >> + !(cif_frmst & CIF_F0_READY)) { >> + v4l2_err(&cif_dev->v4l2_dev, >> + "Bad frame, irq:0x%x frmst:0x%x size:%dx%d\n", >> + intstat, cif_frmst, lastline, lastpix); >> + /* Clear status to receive into the same buffer */ >> + write_cif_reg(base, CIF_FRAME_STATUS, FRM0_STAT_CLS); >> + return; >> + } >> + >> + if (stream->curr_buf) >> + vb_done = &stream->curr_buf->vb; >> + rkcif_assign_new_buffer_oneframe(stream); >> + >> + /* In one-frame mode, must clear status manually to enable >> + * the next frame end irq >> + */ >> + write_cif_reg(base, CIF_FRAME_STATUS, FRM0_STAT_CLS); >> + >> + if (vb_done) >> + rkcif_vb_done_oneframe(stream, vb_done); >> + >> + stream->frame_idx++; >> + } >> +} >> diff --git a/drivers/media/platform/rockchip/cif/dev.c >> b/drivers/media/platform/rockchip/cif/dev.c >> new file mode 100644 >> index 000000000000..88f3833b7cdc >> --- /dev/null >> +++ b/drivers/media/platform/rockchip/cif/dev.c >> @@ -0,0 +1,407 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Rockchip CIF Driver >> + * >> + * Copyright (C) 2018 Rockchip Electronics Co., Ltd. >> + */ >> + >> +#include <linux/clk.h> >> +#include <linux/delay.h> >> +#include <linux/interrupt.h> >> +#include <linux/module.h> >> +#include <linux/of.h> >> +#include <linux/of_graph.h> >> +#include <linux/of_platform.h> >> +#include <linux/of_reserved_mem.h> >> +#include <linux/reset.h> >> +#include <linux/pm_runtime.h> >> +#include <linux/pinctrl/consumer.h> >> +#include <media/v4l2-fwnode.h> >> + >> +#include "dev.h" >> +#include "regs.h" >> + >> +#define RKCIF_VERNO_LEN 10 >> + >> +struct cif_match_data { >> + int chip_id; >> + const char * const *clks; >> + const char * const *rsts; >> + int clks_num; >> + int rsts_num; >> +}; >> + >> +static int rkcif_create_links(struct rkcif_device *dev) >> +{ >> + struct v4l2_subdev *sd = dev->sensor.sd; >> + int ret; >> + >> + ret = media_entity_get_fwnode_pad(&sd->entity, sd->fwnode, >> + MEDIA_PAD_FL_SOURCE); >> + if (ret) >> + return ret; >> + >> + ret = media_create_pad_link(&sd->entity, 0, >> + &dev->stream.vdev.entity, 0, >> + MEDIA_LNK_FL_ENABLED); >> + if (ret) { >> + dev_err(dev->dev, "failed to create link"); >> + return ret; >> + } >> + >> + return 0; >> +} >> + >> +static int subdev_notifier_complete(struct v4l2_async_notifier *notifier) >> +{ >> + struct rkcif_device *dev; >> + int ret; >> + >> + dev = container_of(notifier, struct rkcif_device, notifier); >> + >> + mutex_lock(&dev->media_dev.graph_mutex); >> + >> + ret = rkcif_create_links(dev); >> + if (ret < 0) >> + goto unlock; >> + >> + ret = v4l2_device_register_subdev_nodes(&dev->v4l2_dev); >> + if (ret < 0) >> + goto unlock; >> + >> +unlock: >> + mutex_unlock(&dev->media_dev.graph_mutex); >> + return ret; >> +} >> + >> +static int subdev_notifier_bound(struct v4l2_async_notifier *notifier, >> + struct v4l2_subdev *subdev, >> + struct v4l2_async_subdev *asd) >> +{ >> + struct rkcif_device *cif_dev = container_of(notifier, >> + struct rkcif_device, notifier); >> + >> + int pad; >> + >> + cif_dev->sensor.sd = subdev; >> + pad = media_entity_get_fwnode_pad(&subdev->entity, subdev->fwnode, >> + MEDIA_PAD_FL_SOURCE); >> + if (pad < 0) >> + return pad; >> + >> + cif_dev->sensor.pad = pad; >> + >> + return 0; >> +} >> + >> +static const struct v4l2_async_notifier_operations subdev_notifier_ops = { >> + .bound = subdev_notifier_bound, >> + .complete = subdev_notifier_complete, >> +}; >> + >> +static int cif_subdev_notifier(struct rkcif_device *cif_dev) >> +{ >> + struct v4l2_async_notifier *ntf = &cif_dev->notifier; >> + struct device *dev = cif_dev->dev; >> + struct v4l2_fwnode_endpoint vep = { >> + .bus_type = V4L2_MBUS_PARALLEL, >> + }; >> + struct fwnode_handle *ep; >> + int ret; >> + >> + v4l2_async_notifier_init(ntf); >> + >> + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0, >> + FWNODE_GRAPH_ENDPOINT_NEXT); >> + if (!ep) >> + return -EINVAL; >> + >> + ret = v4l2_fwnode_endpoint_parse(ep, &vep); >> + if (ret) >> + return ret; >> + >> + ret = v4l2_async_notifier_add_fwnode_remote_subdev(ntf, ep, >> + &cif_dev->asd); >> + if (ret) >> + return ret; >> + >> + ntf->ops = &subdev_notifier_ops; >> + >> + fwnode_handle_put(ep); >> + >> + ret = v4l2_async_notifier_register(&cif_dev->v4l2_dev, ntf); >> + return ret; >> +} >> + >> +static int rkcif_register_platform_subdevs(struct rkcif_device *cif_dev) >> +{ >> + int ret; >> + >> + ret = rkcif_register_stream_vdev(cif_dev); > >You must wait with registering the video device (and media device as well >for that matter) until all subdevs are ready. So this should be moved to >subdev_notifier_complete. > >Otherwise device nodes are created that cannot be used yet because the >subdevs aren't ready yet. > >> + if (ret < 0) >> + return ret; >> + >> + ret = cif_subdev_notifier(cif_dev); >> + if (ret < 0) { >> + v4l2_err(&cif_dev->v4l2_dev, >> + "Failed to register subdev notifier(%d)\n", ret); >> + rkcif_unregister_stream_vdev(cif_dev); >> + } >> + >> + return 0; >> +} >> + >> +static const char * const px30_cif_clks[] = { >> + "aclk_cif", >> + "hclk_cif", >> + "pclk_cif", >> + "cif_out", >> +}; >> + >> +static const char * const px30_cif_rsts[] = { >> + "rst_cif_a", >> + "rst_cif_h", >> + "rst_cif_pclkin", >> +}; >> + >> +static const struct cif_match_data px30_cif_match_data = { >> + .chip_id = CHIP_PX30_CIF, >> + .clks = px30_cif_clks, >> + .clks_num = ARRAY_SIZE(px30_cif_clks), >> + .rsts = px30_cif_rsts, >> + .rsts_num = ARRAY_SIZE(px30_cif_rsts), >> +}; >> + >> +static const struct of_device_id rkcif_plat_of_match[] = { >> + { >> + .compatible = "rockchip,px30-cif", >> + .data = &px30_cif_match_data, >> + }, >> + {}, >> +}; >> + >> +static irqreturn_t rkcif_irq_handler(int irq, void *ctx) >> +{ >> + struct device *dev = ctx; >> + struct rkcif_device *cif_dev = dev_get_drvdata(dev); >> + >> + rkcif_irq_oneframe(cif_dev); >> + >> + return IRQ_HANDLED; >> +} >> + >> +static void rkcif_disable_sys_clk(struct rkcif_device *cif_dev) >> +{ >> + int i; >> + >> + for (i = cif_dev->clk_size - 1; i >= 0; i--) >> + clk_disable_unprepare(cif_dev->clks[i]); >> +} >> + >> +static int rkcif_enable_sys_clk(struct rkcif_device *cif_dev) >> +{ >> + int i, ret = -EINVAL; >> + >> + for (i = 0; i < cif_dev->clk_size; i++) { >> + ret = clk_prepare_enable(cif_dev->clks[i]); >> + >> + if (ret < 0) >> + goto err; >> + } >> + >> + return 0; >> + >> +err: >> + for (--i; i >= 0; --i) >> + clk_disable_unprepare(cif_dev->clks[i]); >> + >> + return ret; >> +} >> + >> +void rkcif_soft_reset(struct rkcif_device *cif_dev) >> +{ >> + unsigned int i; >> + >> + for (i = 0; i < ARRAY_SIZE(cif_dev->cif_rst); i++) >> + if (cif_dev->cif_rst[i]) >> + reset_control_assert(cif_dev->cif_rst[i]); >> + udelay(5); >> + for (i = 0; i < ARRAY_SIZE(cif_dev->cif_rst); i++) >> + if (cif_dev->cif_rst[i]) >> + reset_control_deassert(cif_dev->cif_rst[i]); >> +} >> + >> +static int rkcif_plat_probe(struct platform_device *pdev) >> +{ >> + const struct of_device_id *match; >> + struct device_node *node = pdev->dev.of_node; >> + struct device *dev = &pdev->dev; >> + struct v4l2_device *v4l2_dev; >> + struct rkcif_device *cif_dev; >> + const struct cif_match_data *data; >> + struct resource *res; >> + int i, ret, irq; >> + >> + match = of_match_node(rkcif_plat_of_match, node); >> + if (IS_ERR(match)) >> + return PTR_ERR(match); >> + >> + cif_dev = devm_kzalloc(dev, sizeof(*cif_dev), GFP_KERNEL); >> + if (!cif_dev) >> + return -ENOMEM; >> + >> + dev_set_drvdata(dev, cif_dev); >> + cif_dev->dev = dev; >> + >> + irq = platform_get_irq(pdev, 0); >> + if (irq < 0) >> + return irq; >> + >> + ret = devm_request_irq(dev, irq, rkcif_irq_handler, IRQF_SHARED, >> + dev_driver_string(dev), dev); >> + if (ret < 0) { >> + dev_err(dev, "request irq failed: %d\n", ret); >> + return ret; >> + } >> + >> + cif_dev->irq = irq; >> + data = match->data; >> + cif_dev->chip_id = data->chip_id; >> + >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> + cif_dev->base_addr = devm_ioremap_resource(dev, res); >> + >> + if (IS_ERR(cif_dev->base_addr)) >> + return PTR_ERR(cif_dev->base_addr); >> + >> + if (data->clks_num > RKCIF_MAX_BUS_CLK || >> + data->rsts_num > RKCIF_MAX_RESET) { >> + dev_err(dev, "out of range: clks(%d %d) rsts(%d %d)\n", >> + data->clks_num, RKCIF_MAX_BUS_CLK, >> + data->rsts_num, RKCIF_MAX_RESET); >> + return -EINVAL; >> + } >> + >> + for (i = 0; i < data->clks_num; i++) { >> + struct clk *clk = devm_clk_get(dev, data->clks[i]); >> + >> + if (IS_ERR(clk)) { >> + dev_err(dev, "failed to get %s\n", data->clks[i]); >> + return PTR_ERR(clk); >> + } >> + >> + cif_dev->clks[i] = clk; >> + } >> + >> + cif_dev->clk_size = data->clks_num; >> + >> + for (i = 0; i < data->rsts_num; i++) { >> + struct reset_control *rst = >> + devm_reset_control_get(dev, data->rsts[i]); >> + if (IS_ERR(rst)) { >> + dev_err(dev, "failed to get %s\n", data->rsts[i]); >> + return PTR_ERR(rst); >> + } >> + cif_dev->cif_rst[i] = rst; >> + } >> + >> + /* Initialize the stream */ >> + rkcif_stream_init(cif_dev); >> + >> + strlcpy(cif_dev->media_dev.model, "rkcif", >> + sizeof(cif_dev->media_dev.model)); >> + cif_dev->media_dev.dev = &pdev->dev; >> + v4l2_dev = &cif_dev->v4l2_dev; >> + v4l2_dev->mdev = &cif_dev->media_dev; >> + strlcpy(v4l2_dev->name, "rkcif", sizeof(v4l2_dev->name)); >> + v4l2_ctrl_handler_init(&cif_dev->ctrl_handler, 8); >> + v4l2_dev->ctrl_handler = &cif_dev->ctrl_handler; >> + >> + ret = v4l2_device_register(cif_dev->dev, &cif_dev->v4l2_dev); >> + if (ret < 0) >> + return ret; >> + >> + media_device_init(&cif_dev->media_dev); >> + >> + ret = media_device_register(&cif_dev->media_dev); >> + if (ret < 0) { >> + v4l2_err(v4l2_dev, "Failed to register media device: %d\n", >> + ret); >> + goto err_unreg_v4l2_dev; >> + } >> + >> + /* create & register platefom subdev (from of_node) */ > >platefom -> platform > >> + ret = rkcif_register_platform_subdevs(cif_dev); >> + if (ret < 0) >> + goto err_unreg_media_dev; >> + >> + ret = of_reserved_mem_device_init(dev); >> + if (ret) >> + v4l2_warn(v4l2_dev, "No reserved memory region assign to >> CIF\n"); >> + >> + pm_runtime_enable(&pdev->dev); >> + >> + return 0; >> + >> +err_unreg_media_dev: >> + media_device_unregister(&cif_dev->media_dev); >> +err_unreg_v4l2_dev: >> + v4l2_device_unregister(&cif_dev->v4l2_dev); >> + return ret; >> +} >> + >> +static int rkcif_plat_remove(struct platform_device *pdev) >> +{ >> + struct rkcif_device *cif_dev = platform_get_drvdata(pdev); >> + >> + pm_runtime_disable(&pdev->dev); >> + >> + media_device_unregister(&cif_dev->media_dev); >> + v4l2_device_unregister(&cif_dev->v4l2_dev); >> + rkcif_unregister_stream_vdev(cif_dev); >> + >> + return 0; >> +} >> + >> +static int __maybe_unused rkcif_runtime_suspend(struct device *dev) >> +{ >> + struct rkcif_device *cif_dev = dev_get_drvdata(dev); >> + >> + rkcif_disable_sys_clk(cif_dev); >> + >> + return pinctrl_pm_select_sleep_state(dev); >> +} >> + >> +static int __maybe_unused rkcif_runtime_resume(struct device *dev) >> +{ >> + struct rkcif_device *cif_dev = dev_get_drvdata(dev); >> + int ret; >> + >> + ret = pinctrl_pm_select_default_state(dev); >> + if (ret < 0) >> + return ret; >> + rkcif_enable_sys_clk(cif_dev); >> + >> + return 0; >> +} >> + >> +static const struct dev_pm_ops rkcif_plat_pm_ops = { >> + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, >> + pm_runtime_force_resume) >> + SET_RUNTIME_PM_OPS(rkcif_runtime_suspend, rkcif_runtime_resume, NULL) >> +}; >> + >> +static struct platform_driver rkcif_plat_drv = { >> + .driver = { >> + .name = CIF_DRIVER_NAME, >> + .of_match_table = of_match_ptr(rkcif_plat_of_match), >> + .pm = &rkcif_plat_pm_ops, >> + }, >> + .probe = rkcif_plat_probe, >> + .remove = rkcif_plat_remove, >> +}; >> + >> +module_platform_driver(rkcif_plat_drv); >> +MODULE_AUTHOR("Rockchip Camera/ISP team"); >> +MODULE_DESCRIPTION("Rockchip CIF platform driver"); >> +MODULE_LICENSE("GPL"); >> diff --git a/drivers/media/platform/rockchip/cif/dev.h >> b/drivers/media/platform/rockchip/cif/dev.h >> new file mode 100644 >> index 000000000000..3dc47d461d04 >> --- /dev/null >> +++ b/drivers/media/platform/rockchip/cif/dev.h >> @@ -0,0 +1,208 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +/* >> + * Rockchip CIF Driver >> + * >> + * Copyright (C) 2018 Rockchip Electronics Co., Ltd. >> + */ >> + >> +#ifndef _RKCIF_DEV_H >> +#define _RKCIF_DEV_H >> + >> +#include <linux/mutex.h> >> +#include <media/media-device.h> >> +#include <media/media-entity.h> >> +#include <media/v4l2-ctrls.h> >> +#include <media/v4l2-device.h> >> +#include <media/videobuf2-v4l2.h> >> + >> +#define CIF_DRIVER_NAME "rkcif" >> +#define CIF_VIDEODEVICE_NAME "stream_cif" >> + >> +#define RKCIF_MAX_BUS_CLK 8 >> +#define RKCIF_MAX_SENSOR 2 >> +#define RKCIF_MAX_RESET 5 >> +#define RKCIF_MAX_CSI_CHANNEL 4 >> + >> +#define RKCIF_DEFAULT_WIDTH 640 >> +#define RKCIF_DEFAULT_HEIGHT 480 >> + >> +#define write_cif_reg(base, addr, val) writel(val, (addr) + (base)) >> +#define read_cif_reg(base, addr) readl((addr) + (base)) >> + >> +#define write_csihost_reg(base, addr, val) writel(val, (addr) + (base)) >> +#define read_csihost_reg(base, addr) readl((addr) + (base)) >> + >> +enum rkcif_state { >> + RKCIF_STATE_DISABLED, >> + RKCIF_STATE_READY, >> + RKCIF_STATE_STREAMING >> +}; >> + >> +enum rkcif_chip_id { >> + CHIP_PX30_CIF, >> + CHIP_RK1808_CIF, >> + CHIP_RK3128_CIF, >> + CHIP_RK3288_CIF >> +}; >> + >> +enum host_type_t { >> + RK_CSI_RXHOST, >> + RK_DSI_RXHOST >> +}; >> + >> +struct rkcif_buffer { >> + struct vb2_v4l2_buffer vb; >> + struct list_head queue; >> + union { >> + u32 buff_addr[VIDEO_MAX_PLANES]; >> + void *vaddr[VIDEO_MAX_PLANES]; >> + }; >> +}; >> + >> +struct rkcif_dummy_buffer { >> + void *vaddr; >> + dma_addr_t dma_addr; >> + u32 size; >> +}; >> + >> +extern int rkcif_debug; >> + >> +static inline struct rkcif_buffer *to_rkcif_buffer(struct vb2_v4l2_buffer >> *vb) >> +{ >> + return container_of(vb, struct rkcif_buffer, vb); >> +} >> + >> +/* >> + * struct rkcif_sensor_info - Sensor infomations >> + * @mbus: media bus configuration >> + */ >> +struct rkcif_sensor_info { >> + struct v4l2_subdev *sd; >> + int pad; >> + struct v4l2_mbus_config mbus; >> + int lanes; >> +}; >> + >> +/* >> + * struct cif_output_fmt - The output format >> + * >> + * @fourcc: pixel format in fourcc >> + * @cplanes: number of colour planes >> + * @fmt_val: the fmt val corresponding to CIF_FOR register >> + * @bpp: bits per pixel for each cplanes >> + */ >> +struct cif_output_fmt { >> + u32 fourcc; >> + u32 mbus; >> + u8 cplanes; >> + u8 mplanes; >> + u32 fmt_val; >> + u8 bpp[VIDEO_MAX_PLANES]; >> +}; >> + >> +enum cif_fmt_type { >> + CIF_FMT_TYPE_YUV = 0, >> + CIF_FMT_TYPE_RAW, >> +}; >> + >> +/* >> + * struct cif_input_fmt - The input mbus format from sensor >> + * >> + * @mbus_code: mbus format >> + * @dvp_fmt_val: the fmt val corresponding to CIF_FOR register >> + * @csi_fmt_val: the fmt val corresponding to CIF_CSI_ID_CTRL >> + * @field: the field type of the input from sensor >> + */ >> +struct cif_input_fmt { >> + u32 mbus_code; >> + u32 dvp_fmt_val; >> + u32 csi_fmt_val; >> + enum cif_fmt_type fmt_type; >> + enum v4l2_field field; >> +}; >> + >> +/* >> + * struct rkcif_stream - Stream states TODO >> + * >> + * @vbq_lock: lock to protect buf_queue >> + * @buf_queue: queued buffer list >> + * @dummy_buf: dummy space to store dropped data >> + * >> + * rkcif use shadowsock registers, so it need two buffer at a time >> + * @curr_buf: the buffer used for current frame >> + * @next_buf: the buffer used for next frame >> + */ >> +struct rkcif_stream { >> + struct rkcif_device *cifdev; >> + enum rkcif_state state; >> + bool stopping; >> + wait_queue_head_t wq_stopped; >> + int frame_idx; >> + int frame_phase; >> + >> + /* lock between irq and buf_queue */ >> + spinlock_t vbq_lock; >> + struct vb2_queue buf_queue; >> + struct list_head buf_head; >> + struct rkcif_dummy_buffer dummy_buf; >> + struct rkcif_buffer *curr_buf; >> + struct rkcif_buffer *next_buf; >> + >> + /* vfd lock */ >> + struct mutex vlock; >> + struct video_device vdev; >> + /* TODO: pad for dvp and mipi separately? */ >> + struct media_pad pad; >> + >> + const struct cif_output_fmt *cif_fmt_out; >> + const struct cif_input_fmt *cif_fmt_in; >> + struct v4l2_pix_format_mplane pixm; >> + struct v4l2_rect crop; >> + int crop_enable; >> +}; >> + >> +static inline struct rkcif_stream *to_rkcif_stream(struct video_device >> *vdev) >> +{ >> + return container_of(vdev, struct rkcif_stream, vdev); >> +} >> + >> +/* >> + * struct rkcif_device - ISP platform device >> + * @base_addr: base register address >> + * @active_sensor: sensor in-use, set when streaming on >> + * @stream: capture video device >> + */ >> +struct rkcif_device { >> + struct list_head list; >> + struct device *dev; >> + int irq; >> + void __iomem *base_addr; >> + void __iomem *csi_base; >> + struct clk *clks[RKCIF_MAX_BUS_CLK]; >> + int clk_size; >> + struct vb2_alloc_ctx *alloc_ctx; >> + bool iommu_en; >> + struct iommu_domain *domain; >> + struct reset_control *cif_rst[RKCIF_MAX_RESET]; >> + >> + struct v4l2_device v4l2_dev; >> + struct media_device media_dev; >> + struct v4l2_ctrl_handler ctrl_handler; >> + struct v4l2_async_notifier notifier; >> + struct v4l2_async_subdev asd; >> + struct rkcif_sensor_info sensor; >> + >> + struct rkcif_stream stream; >> + >> + int chip_id; >> +}; >> + >> +void rkcif_unregister_stream_vdev(struct rkcif_device *dev); >> +int rkcif_register_stream_vdev(struct rkcif_device *dev); >> +void rkcif_stream_init(struct rkcif_device *dev); >> + >> +void rkcif_irq_oneframe(struct rkcif_device *cif_dev); >> +void rkcif_irq_pingpong(struct rkcif_device *cif_dev); >> +void rkcif_soft_reset(struct rkcif_device *cif_dev); >> + >> +#endif >> diff --git a/drivers/media/platform/rockchip/cif/regs.h >> b/drivers/media/platform/rockchip/cif/regs.h >> new file mode 100644 >> index 000000000000..5e0f926c70d3 >> --- /dev/null >> +++ b/drivers/media/platform/rockchip/cif/regs.h >> @@ -0,0 +1,256 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +/* >> + * Rockchip CIF Driver >> + * >> + * Copyright (C) 2018 Rockchip Electronics Co., Ltd. >> + */ >> + >> +#ifndef _RKCIF_REGS_H >> +#define _RKCIF_REGS_H >> + >> +/* CIF Reg Offset */ >> +#define CIF_CTRL 0x00 >> +#define CIF_INTEN 0x04 >> +#define CIF_INTSTAT 0x08 >> +#define CIF_FOR 0x0c >> +#define CIF_LINE_NUM_ADDR 0x10 >> +#define CIF_FRM0_ADDR_Y 0x14 >> +#define CIF_FRM0_ADDR_UV 0x18 >> +#define CIF_FRM1_ADDR_Y 0x1c >> +#define CIF_FRM1_ADDR_UV 0x20 >> +#define CIF_VIR_LINE_WIDTH 0x24 >> +#define CIF_SET_SIZE 0x28 >> +#define CIF_SCM_ADDR_Y 0x2c >> +#define CIF_SCM_ADDR_U 0x30 >> +#define CIF_SCM_ADDR_V 0x34 >> +#define CIF_WB_UP_FILTER 0x38 >> +#define CIF_WB_LOW_FILTER 0x3c >> +#define CIF_WBC_CNT 0x40 >> +#define CIF_CROP 0x44 >> +#define CIF_SCL_CTRL 0x48 >> +#define CIF_SCL_DST 0x4c >> +#define CIF_SCL_FCT 0x50 >> +#define CIF_SCL_VALID_NUM 0x54 >> +#define CIF_LINE_LOOP_CTR 0x58 >> +#define CIF_FRAME_STATUS 0x60 >> +#define CIF_CUR_DST 0x64 >> +#define CIF_LAST_LINE 0x68 >> +#define CIF_LAST_PIX 0x6c >> + >> +/* RK1808 CIF CSI Registers Offset */ >> +#define CIF_CSI_ID0_CTRL0 0x80 >> +#define CIF_CSI_ID0_CTRL1 0x84 >> +#define CIF_CSI_ID1_CTRL0 0x88 >> +#define CIF_CSI_ID1_CTRL1 0x8c >> +#define CIF_CSI_ID2_CTRL0 0x90 >> +#define CIF_CSI_ID2_CTRL1 0x94 >> +#define CIF_CSI_ID3_CTRL0 0x98 >> +#define CIF_CSI_ID3_CTRL1 0x9c >> +#define CIF_CSI_WATER_LINE 0xa0 >> +#define CIF_CSI_FRM0_ADDR_Y_ID0 0xa4 >> +#define CIF_CSI_FRM1_ADDR_Y_ID0 0xa8 >> +#define CIF_CSI_FRM0_ADDR_UV_ID0 0xac >> +#define CIF_CSI_FRM1_ADDR_UV_ID0 0xb0 >> +#define CIF_CSI_FRM0_VLW_Y_ID0 0xb4 >> +#define CIF_CSI_FRM1_VLW_Y_ID0 0xb8 >> +#define CIF_CSI_FRM0_VLW_UV_ID0 0xbc >> +#define CIF_CSI_FRM1_VLW_UV_ID0 0xc0 >> +#define CIF_CSI_FRM0_ADDR_Y_ID1 0xc4 >> +#define CIF_CSI_FRM1_ADDR_Y_ID1 0xc8 >> +#define CIF_CSI_FRM0_ADDR_UV_ID1 0xcc >> +#define CIF_CSI_FRM1_ADDR_UV_ID1 0xd0 >> +#define CIF_CSI_FRM0_VLW_Y_ID1 0xd4 >> +#define CIF_CSI_FRM1_VLW_Y_ID1 0xd8 >> +#define CIF_CSI_FRM0_VLW_UV_ID1 0xdc >> +#define CIF_CSI_FRM1_VLW_UV_ID1 0xe0 >> +#define CIF_CSI_FRM0_ADDR_Y_ID2 0xe4 >> +#define CIF_CSI_FRM1_ADDR_Y_ID2 0xe8 >> +#define CIF_CSI_FRM0_ADDR_UV_ID2 0xec >> +#define CIF_CSI_FRM1_ADDR_UV_ID2 0xf0 >> +#define CIF_CSI_FRM0_VLW_Y_ID2 0xf4 >> +#define CIF_CSI_FRM1_VLW_Y_ID2 0xf8 >> +#define CIF_CSI_FRM0_VLW_UV_ID2 0xfc >> +#define CIF_CSI_FRM1_VLW_UV_ID2 0x100 >> +#define CIF_CSI_FRM0_ADDR_Y_ID3 0x104 >> +#define CIF_CSI_FRM1_ADDR_Y_ID3 0x108 >> +#define CIF_CSI_FRM0_ADDR_UV_ID3 0x10c >> +#define CIF_CSI_FRM1_ADDR_UV_ID3 0x110 >> +#define CIF_CSI_FRM0_VLW_Y_ID3 0x114 >> +#define CIF_CSI_FRM1_VLW_Y_ID3 0x118 >> +#define CIF_CSI_FRM0_VLW_UV_ID3 0x11c >> +#define CIF_CSI_FRM1_VLW_UV_ID3 0x120 >> +#define CIF_CSI_INTEN 0x124 >> +#define CIF_CSI_INTSTAT 0x128 >> +#define CIF_CSI_LINE_INT_NUM_ID0_1 0x12c >> +#define CIF_CSI_LINE_INT_NUM_ID2_3 0x130 >> +#define CIF_CSI_LINE_CNT_ID0_1 0x134 >> +#define CIF_CSI_LINE_CNT_ID2_3 0x138 >> +#define CIF_CSI_ID0_CROP_START 0x13c >> +#define CIF_CSI_ID1_CROP_START 0x140 >> +#define CIF_CSI_ID2_CROP_START 0x144 >> +#define CIF_CSI_ID3_CROP_START 0x148 >> + >> +/* The key register bit description */ >> + >> +/* CIF_CTRL Reg */ >> +#define DISABLE_CAPTURE (0x0 << 0) >> +#define ENABLE_CAPTURE (0x1 << 0) >> +#define MODE_ONEFRAME (0x0 << 1) >> +#define MODE_PINGPONG (0x1 << 1) >> +#define MODE_LINELOOP (0x2 << 1) >> +#define AXI_BURST_16 (0xF << 12) >> + >> +/* CIF_INTEN */ >> +#define INTEN_DISABLE (0x0 << 0) >> +#define FRAME_END_EN (0x1 << 0) >> +#define LINE_ERR_EN (0x1 << 2) >> +#define BUS_ERR_EN (0x1 << 6) >> +#define SCL_ERR_EN (0x1 << 7) >> +#define PST_INF_FRAME_END_EN (0x1 << 9) >> + >> +/* CIF INTSTAT */ >> +#define INTSTAT_CLS (0x3FF) >> +#define FRAME_END (0x01 << 0) >> +#define LINE_ERR (0x01 << 2) >> +#define PST_INF_FRAME_END (0x01 << 9) >> +#define FRAME_END_CLR (0x01 << 0) >> +#define LINE_ERR_CLR (0x01 << 2) >> +#define PST_INF_FRAME_END_CLR (0x01 << 9) >> +#define INTSTAT_ERR (0xFC) >> + >> +/* FRAME STATUS */ >> +#define FRAME_STAT_CLS 0x00 >> +#define FRM0_STAT_CLS 0x20 /* write 0 to clear >> frame 0 */ >> + >> +/* CIF FORMAT */ >> +#define VSY_HIGH_ACTIVE (0x01 << 0) >> +#define VSY_LOW_ACTIVE (0x00 << 0) >> +#define HSY_LOW_ACTIVE (0x01 << 1) >> +#define HSY_HIGH_ACTIVE (0x00 << 1) >> +#define INPUT_MODE_YUV (0x00 << 2) >> +#define INPUT_MODE_PAL (0x02 << 2) >> +#define INPUT_MODE_NTSC (0x03 << 2) >> +#define INPUT_MODE_BT1120 (0x07 << 2) >> +#define INPUT_MODE_RAW (0x04 << 2) >> +#define INPUT_MODE_JPEG (0x05 << 2) >> +#define INPUT_MODE_MIPI (0x06 << 2) >> +#define YUV_INPUT_ORDER_UYVY (0x00 << 5) >> +#define YUV_INPUT_ORDER_YVYU (0x01 << 5) >> +#define YUV_INPUT_ORDER_VYUY (0x10 << 5) >> +#define YUV_INPUT_ORDER_YUYV (0x03 << 5) >> +#define YUV_INPUT_422 (0x00 << 7) >> +#define YUV_INPUT_420 (0x01 << 7) >> +#define INPUT_420_ORDER_EVEN (0x00 << 8) >> +#define INPUT_420_ORDER_ODD (0x01 << 8) >> +#define CCIR_INPUT_ORDER_ODD (0x00 << 9) >> +#define CCIR_INPUT_ORDER_EVEN (0x01 << 9) >> +#define RAW_DATA_WIDTH_8 (0x00 << 11) >> +#define RAW_DATA_WIDTH_10 (0x01 << 11) >> +#define RAW_DATA_WIDTH_12 (0x02 << 11) >> +#define YUV_OUTPUT_422 (0x00 << 16) >> +#define YUV_OUTPUT_420 (0x01 << 16) >> +#define OUTPUT_420_ORDER_EVEN (0x00 << 17) >> +#define OUTPUT_420_ORDER_ODD (0x01 << 17) >> +#define RAWD_DATA_LITTLE_ENDIAN (0x00 << 18) >> +#define RAWD_DATA_BIG_ENDIAN (0x01 << 18) >> +#define UV_STORAGE_ORDER_UVUV (0x00 << 19) >> +#define UV_STORAGE_ORDER_VUVU (0x01 << 19) >> +#define BT1120_CLOCK_SINGLE_EDGES (0x00 << 24) >> +#define BT1120_CLOCK_DOUBLE_EDGES (0x01 << 24) >> +#define BT1120_TRANSMIT_INTERFACE (0x00 << 25) >> +#define BT1120_TRANSMIT_PROGRESS (0x01 << 25) >> +#define BT1120_YC_SWAP (0x01 << 26) >> + >> +/* CIF_SCL_CTRL */ >> +#define ENABLE_SCL_DOWN (0x01 << 0) >> +#define DISABLE_SCL_DOWN (0x00 << 0) >> +#define ENABLE_SCL_UP (0x01 << 1) >> +#define DISABLE_SCL_UP (0x00 << 1) >> +#define ENABLE_YUV_16BIT_BYPASS (0x01 << 4) >> +#define DISABLE_YUV_16BIT_BYPASS (0x00 << 4) >> +#define ENABLE_RAW_16BIT_BYPASS (0x01 << 5) >> +#define DISABLE_RAW_16BIT_BYPASS (0x00 << 5) >> +#define ENABLE_32BIT_BYPASS (0x01 << 6) >> +#define DISABLE_32BIT_BYPASS (0x00 << 6) >> + >> +/* CIF_INTSTAT */ >> +#define CIF_F0_READY (0x01 << 0) >> +#define CIF_F1_READY (0x01 << 1) >> + >> +/* CIF CROP */ >> +#define CIF_CROP_Y_SHIFT 16 >> +#define CIF_CROP_X_SHIFT 0 >> + >> +/* CIF_CSI_ID_CTRL0 */ >> +#define CSI_DISABLE_CAPTURE (0x0 << 0) >> +#define CSI_ENABLE_CAPTURE (0x1 << 0) >> +#define CSI_WRDDR_TYPE_RAW8 (0x0 << 1) >> +#define CSI_WRDDR_TYPE_RAW10 (0x1 << 1) >> +#define CSI_WRDDR_TYPE_RAW12 (0x2 << 1) >> +#define CSI_WRDDR_TYPE_RGB888 (0x3 << 1) >> +#define CSI_WRDDR_TYPE_YUV422 (0x4 << 1) >> +#define CSI_DISABLE_COMMAND_MODE (0x0 << 4) >> +#define CSI_ENABLE_COMMAND_MODE (0x1 << 4) >> +#define CSI_DISABLE_CROP (0x0 << 5) >> +#define CSI_ENABLE_CROP (0x1 << 5) >> + >> +/* CIF_CSI_INTEN */ >> +#define CSI_FRAME0_START_INTEN(id) (0x1 << ((id) * 2)) >> +#define CSI_FRAME1_START_INTEN(id) (0x1 << ((id) * 2 + 1)) >> +#define CSI_FRAME0_END_INTEN(id) (0x1 << ((id) * 2 + 8)) >> +#define CSI_FRAME1_END_INTEN(id) (0x1 << ((id) * 2 + 9)) >> +#define CSI_DMA_Y_FIFO_OVERFLOW_INTEN (0x1 << 16) >> +#define CSI_DMA_UV_FIFO_OVERFLOW_INTEN (0x1 << 17) >> +#define CSI_CONFIG_FIFO_OVERFLOW_INTEN (0x1 << 18) >> +#define CSI_BANDWIDTH_LACK_INTEN (0x1 << 19) >> +#define CSI_RX_FIFO_OVERFLOW_INTEN (0x1 << 20) >> +#define CSI_ALL_FRAME_START_INTEN (0xff << 0) >> +#define CSI_ALL_FRAME_END_INTEN (0xff << 8) >> +#define CSI_ALL_ERROR_INTEN (0x1f << 16) >> + >> +/* CIF_CSI_INTSTAT */ >> +#define CSI_FRAME0_START_ID0 (0x1 << 0) >> +#define CSI_FRAME1_START_ID0 (0x1 << 1) >> +#define CSI_FRAME0_START_ID1 (0x1 << 2) >> +#define CSI_FRAME1_START_ID1 (0x1 << 3) >> +#define CSI_FRAME0_START_ID2 (0x1 << 4) >> +#define CSI_FRAME1_START_ID2 (0x1 << 5) >> +#define CSI_FRAME0_START_ID3 (0x1 << 6) >> +#define CSI_FRAME1_START_ID3 (0x1 << 7) >> +#define CSI_FRAME0_END_ID0 (0x1 << 8) >> +#define CSI_FRAME1_END_ID0 (0x1 << 9) >> +#define CSI_FRAME0_END_ID1 (0x1 << 10) >> +#define CSI_FRAME1_END_ID1 (0x1 << 11) >> +#define CSI_FRAME0_END_ID2 (0x1 << 12) >> +#define CSI_FRAME1_END_ID2 (0x1 << 13) >> +#define CSI_FRAME0_END_ID3 (0x1 << 14) >> +#define CSI_FRAME1_END_ID3 (0x1 << 15) >> +#define CSI_DMA_Y_FIFO_OVERFLOW (0x1 << 16) >> +#define CSI_DMA_UV_FIFO_OVERFLOW (0x1 << 17) >> +#define CSI_CONFIG_FIFO_OVERFLOW (0x1 << 18) >> +#define CSI_BANDWIDTH_LACK (0x1 << 19) >> +#define CSI_RX_FIFO_OVERFLOW (0x1 << 20) >> + >> +#define CSI_FIFO_OVERFLOW (CSI_DMA_Y_FIFO_OVERFLOW | \ >> + CSI_DMA_UV_FIFO_OVERFLOW | \ >> + CSI_CONFIG_FIFO_OVERFLOW | \ >> + CSI_RX_FIFO_OVERFLOW) >> + >> +/* CSI Host Registers Define */ >> +#define CSIHOST_N_LANES 0x04 >> +#define CSIHOST_PHY_RSTZ 0x0c >> +#define CSIHOST_RESETN 0x10 >> +#define CSIHOST_ERR1 0x20 >> +#define CSIHOST_ERR2 0x24 >> +#define CSIHOST_MSK1 0x28 >> +#define CSIHOST_MSK2 0x2c >> +#define CSIHOST_CONTROL 0x40 >> + >> +#define SW_CPHY_EN(x) ((x) << 0) >> +#define SW_DSI_EN(x) ((x) << 4) >> +#define SW_DATATYPE_FS(x) ((x) << 8) >> +#define SW_DATATYPE_FE(x) ((x) << 14) >> +#define SW_DATATYPE_LS(x) ((x) << 20) >> +#define SW_DATATYPE_LE(x) ((x) << 26) >> + >> +#endif >> > >Regards, > > Hans -- Maxime Chevallier, Bootlin Embedded Linux and kernel engineering https://bootlin.com
