From: Vincent Stehlé <[email protected]>
[ Upstream commit 58bb90ab415562eededb932455046924e65df342 ]
The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low.
This has been verified on a board and somewhat confirmed by both the GPIO
name ("STATUS_LED_N") and the reduced schematics [1].
[1]:
https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf
Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Signed-off-by: Vincent Stehlé <[email protected]>
Cc: Stefan Wahren <[email protected]>
Cc: Florian Fainelli <[email protected]>
Tested-by: Stefan Wahren <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 4c3f606e5b8d..f65448c01e31 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -24,7 +24,7 @@
leds {
act {
- gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
};
};
--
2.25.1
