On Tue, Jun 02, 2020 at 03:39:21PM +0530, Sumit Semwal wrote: > From: Nisha Kumari <[email protected]> > > Adding the devicetree binding for labibb regulator. > > Signed-off-by: Nisha Kumari <[email protected]> > Signed-off-by: Sumit Semwal <[email protected]> > [sumits: cleanup as per review comments and update to yaml] > -- > v2: updated for better compatible string and names. > v3: moved to yaml > v4: fixed dt_binding_check issues > --- > .../regulator/qcom-labibb-regulator.yaml | 79 +++++++++++++++++++ > 1 file changed, 79 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml > > diff --git > a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml > b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml > new file mode 100644 > index 000000000000..178820ec04c7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml > @@ -0,0 +1,79 @@ > +# SPDX-License-Identifier: GPL-2.0-only
Dual license new bindings: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/regulator/qcom-labibb-regulator.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm's LAB(LCD AMOLED Boost)/IBB(Inverting Buck Boost) Regulator > + > +maintainers: > + - Sumit Semwal <[email protected]> > + > +description: > + LAB can be used as a positive boost power supply and IBB can be used as a > + negative boost power supply for display panels. Currently implemented for > + pmi8998. > + > +allOf: > + - $ref: "regulator.yaml#" I think you want this under each child as this schema applies to each regulator. But you aren't using any of the regulator properties, so not even needed? Or the example is not complete? > + > +properties: > + compatible: > + const: qcom,pmi8998-lab-ibb > + > + lab: > + type: object > + > + properties: > + > + interrupts: > + maxItems: 1 > + description: > + Short-circuit interrupt for lab. > + > + interrupt-names: > + const: sc-err You don't really need a name if there's only 1. > + > + required: > + - interrupts > + - interrupt-names > + > + ibb: > + type: object > + > + properties: > + > + interrupts: > + maxItems: 1 > + description: > + Short-circuit interrupt for lab. > + > + interrupt-names: > + const: sc-err > + > + required: > + - interrupts > + - interrupt-names > + > +required: > + - compatible unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + labibb { > + compatible = "qcom,pmi8998-lab-ibb"; > + > + lab { > + interrupts = <0x3 0x0 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "sc-err"; > + }; > + > + ibb { > + interrupts = <0x3 0x2 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "sc-err"; > + }; > + }; > + > +... > -- > 2.26.2 >
