BCM6362 SoCs have a power domain controller to enable/disable certain components in order to save power.
Signed-off-by: Álvaro Fernández Rojas <[email protected]> Acked-by: Florian Fainelli <[email protected]> --- v2: Add dt-bindings header files. arch/mips/boot/dts/brcm/bcm6362.dtsi | 6 ++++++ include/dt-bindings/soc/bcm6362-pm.h | 21 +++++++++++++++++++++ 2 files changed, 27 insertions(+) create mode 100644 include/dt-bindings/soc/bcm6362-pm.h diff --git a/arch/mips/boot/dts/brcm/bcm6362.dtsi b/arch/mips/boot/dts/brcm/bcm6362.dtsi index 8ae6981735b8..c98f9111e3c8 100644 --- a/arch/mips/boot/dts/brcm/bcm6362.dtsi +++ b/arch/mips/boot/dts/brcm/bcm6362.dtsi @@ -108,6 +108,12 @@ uart1: serial@10000120 { status = "disabled"; }; + periph_pwr: power-controller@10001848 { + compatible = "brcm,bcm6362-power-controller"; + reg = <0x10001848 0x4>; + #power-domain-cells = <1>; + }; + leds0: led-controller@10001900 { #address-cells = <1>; #size-cells = <0>; diff --git a/include/dt-bindings/soc/bcm6362-pm.h b/include/dt-bindings/soc/bcm6362-pm.h new file mode 100644 index 000000000000..d087ba63c7a1 --- /dev/null +++ b/include/dt-bindings/soc/bcm6362-pm.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __DT_BINDINGS_BMIPS_BCM6362_PM_H +#define __DT_BINDINGS_BMIPS_BCM6362_PM_H + +#define BCM6362_POWER_DOMAIN_SAR 0 +#define BCM6362_POWER_DOMAIN_IPSEC 1 +#define BCM6362_POWER_DOMAIN_MIPS 2 +#define BCM6362_POWER_DOMAIN_DECT 3 +#define BCM6362_POWER_DOMAIN_USBH 4 +#define BCM6362_POWER_DOMAIN_USBD 5 +#define BCM6362_POWER_DOMAIN_ROBOSW 6 +#define BCM6362_POWER_DOMAIN_PCM 7 +#define BCM6362_POWER_DOMAIN_PERIPH 8 +#define BCM6362_POWER_DOMAIN_ADSL_PHY 9 +#define BCM6362_POWER_DOMAIN_GMII_PADS 10 +#define BCM6362_POWER_DOMAIN_FAP 11 +#define BCM6362_POWER_DOMAIN_PCIE 12 +#define BCM6362_POWER_DOMAIN_WLAN_PADS 13 + +#endif /* __DT_BINDINGS_BMIPS_BCM6362_PM_H */ -- 2.26.2
