The following changes since commit 8f3d9f354286745c751374f5f1fcafee6b3f3136:
Linux 5.7-rc1 (2020-04-12 12:35:55 -0700) are available in the Git repository at: ssh://[email protected]/pub/scm/linux/kernel/git/thermal/linux.git tags/thermal-v5.8-rc1 for you to fetch changes up to 8d485da0ddee79d0e6713405694253d401e41b93: thermal/int340x_thermal: Don't require IDSP to exist (2020-05-29 20:26:51 +0200) ---------------------------------------------------------------- - Add the hwmon support on the i.MX SC (Anson Huang) - Thermal framework cleanups (self-encapsulation, pointless stubs, private structures) (Daniel Lezcano) - Use the PM QoS frequency changes for the devfreq cooling device (Matthias Kaehlcke) - Remove duplicate error messages from platform_get_irq() error handling (Markus Elfring) - Add support for the bandgap sensors (Keerthy) - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz) - Add Renesas R-Car maintainer entry (Niklas Söderlund) - Fix error checking after calling ti_bandgap_get_sensor_data() for the TI SoC thermal (Sudip Mukherjee) - Add latency constraint for the idle injection, the DT binding and the change the registering function (Daniel Lezcano) - Convert the thermal framework binding to the Yaml schema (Amit Kucheria) - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A. R. Silva) - Thermal framework cleanups (alphabetic order for heads, replace module.h by export.h, make file naming consistent) (Amit Kucheria) - Merge tsens-common into the tsens driver (Amit Kucheria) - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven) - Clean up the rcar_thermal_update_temp() function in the rcar thermal driver (Niklas Söderlund) - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian Tang) - Export GDDV, OEM vendor variables, and don't require IDSP for the int340x thermal driver - trivial conflicts fixed (Matthew Garrett) ---------------------------------------------------------------- Amit Kucheria (18): dt-bindings: thermal: Add yaml bindings for thermal sensors dt-bindings: thermal: Add yaml bindings for thermal cooling-devices dt-bindings: thermal: Add yaml bindings for thermal zones thermal/core: Get rid of MODULE_* tags thermal/core: Replace module.h with export.h thermal/drivers/thermal_helpers: Sort headers alphabetically thermal/drivers/thermal_helpers: Include export.h thermal/drivers/thermal_hwmon: Sort headers alphabetically thermal/drivers/thermal_hwmon: Include export.h thermal/drivers/clock_cooling: Sort headers alphabetically thermal/drivers/clock_cooling: Include export.h thermal/drivers/cpufreq_cooling: Sort headers alphabetically thermal/drivers/cpufreq_cooling: Replace module.h with export.h thermal/drivers/of-thermal: Sort headers alphabetically thermal/drivers/user_space: Sort headers alphabetically thermal/governors: Prefix all source files with gov_ thermal/of: Rename of-thermal.c drivers: thermal: tsens: Merge tsens-common.c into tsens.c Andrzej Pietrasiewicz (1): thermal: int3400_thermal: Statically initialize .get_mode()/.set_mode() ops Anson Huang (1): thermal: imx_sc_thermal: Add hwmon support Daniel Lezcano (15): thermal: core: Make thermal_zone_set_trips private thermal: core: Remove pointless debug traces thermal: Move default governor config option to the internal header thermal: Move struct thermal_attr to the private header thermal: Move internal IPA functions thermal: Move trip point structure definition to private header thermal: Move get_tz_trend to the internal header thermal: Move get_thermal_instance to the internal header thermal: Change IS_ENABLED to IFDEF in the header file thermal: Remove stubs for thermal_zone_[un]bind_cooling_device thermal: Remove thermal_zone_device_update() stub powercap/drivers/idle_inject: Specify idle state max latency dt-bindings: thermal: Add the idle cooling device thermal/drivers/cpuidle_cooling: Change the registration function thermal: cpuidle: Register cpuidle cooling device Geert Uytterhoeven (1): thermal: qoriq: Add platform dependencies Gustavo A. R. Silva (1): thermal: imx8mm: Replace zero-length array with flexible-array Keerthy (2): dt-bindings: thermal: k3: Add VTM bindings documentation thermal: k3: Add support for bandgap sensors Markus Elfring (1): thermal: Delete an error message in four functions Matthew Garrett (3): thermal/int340x_thermal: Export GDDV thermal/int340x_thermal: Export OEM vendor variables thermal/int340x_thermal: Don't require IDSP to exist Matthias Kaehlcke (1): thermal: devfreq_cooling: Use PM QoS to set frequency limits Niklas Söderlund (2): MAINTAINERS: Add entry for Renesas R-Car thermal drivers thermal: rcar_thermal: Clean up rcar_thermal_update_temp() Sudip Mukherjee (1): thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTR Yuantian Tang (1): thermal: qoriq: Update the settings for TMUv2 .../bindings/thermal/thermal-cooling-devices.yaml | 116 +++ .../devicetree/bindings/thermal/thermal-idle.yaml | 145 ++++ .../bindings/thermal/thermal-sensor.yaml | 72 ++ .../devicetree/bindings/thermal/thermal-zones.yaml | 341 +++++++++ .../bindings/thermal/ti,am654-thermal.yaml | 56 ++ MAINTAINERS | 9 + drivers/cpuidle/cpuidle-arm.c | 3 + drivers/cpuidle/cpuidle-psci.c | 3 + drivers/powercap/idle_inject.c | 16 +- drivers/thermal/Kconfig | 14 +- drivers/thermal/Makefile | 11 +- drivers/thermal/clock_cooling.c | 3 +- drivers/thermal/cpufreq_cooling.c | 10 +- drivers/thermal/cpuidle_cooling.c | 63 +- drivers/thermal/devfreq_cooling.c | 70 +- drivers/thermal/{fair_share.c => gov_fair_share.c} | 0 .../{power_allocator.c => gov_power_allocator.c} | 0 drivers/thermal/{step_wise.c => gov_step_wise.c} | 0 drivers/thermal/{user_space.c => gov_user_space.c} | 2 +- drivers/thermal/imx8mm_thermal.c | 2 +- drivers/thermal/imx_sc_thermal.c | 4 + .../intel/int340x_thermal/int3400_thermal.c | 223 +++++- drivers/thermal/k3_bandgap.c | 264 +++++++ drivers/thermal/qcom/Makefile | 4 +- drivers/thermal/qcom/tsens-common.c | 843 --------------------- drivers/thermal/qcom/tsens.c | 838 ++++++++++++++++++++ drivers/thermal/qcom/tsens.h | 5 - drivers/thermal/qoriq_thermal.c | 26 +- drivers/thermal/rcar_thermal.c | 9 +- drivers/thermal/rockchip_thermal.c | 4 +- drivers/thermal/st/st_thermal_memmap.c | 4 +- drivers/thermal/st/stm_thermal.c | 4 +- drivers/thermal/thermal_core.c | 12 +- drivers/thermal/thermal_core.h | 52 ++ drivers/thermal/thermal_helpers.c | 16 +- drivers/thermal/thermal_hwmon.c | 6 +- drivers/thermal/{of-thermal.c => thermal_of.c} | 10 +- drivers/thermal/ti-soc-thermal/ti-bandgap.c | 5 +- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 6 +- include/linux/cpu_cooling.h | 12 +- include/linux/idle_inject.h | 4 + include/linux/thermal.h | 84 +- 42 files changed, 2303 insertions(+), 1068 deletions(-) create mode 100644 Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml create mode 100644 Documentation/devicetree/bindings/thermal/thermal-idle.yaml create mode 100644 Documentation/devicetree/bindings/thermal/thermal-sensor.yaml create mode 100644 Documentation/devicetree/bindings/thermal/thermal-zones.yaml create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml rename drivers/thermal/{fair_share.c => gov_fair_share.c} (100%) rename drivers/thermal/{power_allocator.c => gov_power_allocator.c} (100%) rename drivers/thermal/{step_wise.c => gov_step_wise.c} (100%) rename drivers/thermal/{user_space.c => gov_user_space.c} (100%) create mode 100644 drivers/thermal/k3_bandgap.c delete mode 100644 drivers/thermal/qcom/tsens-common.c rename drivers/thermal/{of-thermal.c => thermal_of.c} (100%) -- <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
