Hi!
> > I did this on 2.6.23-rc8-mm1 kernel (The RT hack may not be
> > neccessary), but then it oopses somewhere in softmac layer. I'll try
> > to play with it some more.
> >
> > If you have any ideas, let me know.
> > Pavel
> >
> > --- clean-mm/drivers/net/wireless/rt2x00/rt73usb.c 2007-10-09
> > 09:32:08.000000000 +0200
> > +++ linux-mm/drivers/net/wireless/rt2x00/rt73usb.c 2007-10-19
> > 22:19:45.000000000 +0200
> > @@ -1580,7 +1580,6 @@
> >
> > if (!rt2x00_rev(&rt2x00dev->chip, 0x25730)) {
> > ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
> > - return -ENODEV;
> > }
> >
> > if (!rt2x00_rf(&rt2x00dev->chip, RF5226) &&
> > @@ -1588,7 +1587,6 @@
> > !rt2x00_rf(&rt2x00dev->chip, RF5225) &&
> > !rt2x00_rf(&rt2x00dev->chip, RF2527)) {
> > ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
> > - return -ENODEV;
> > }
>
> Both removals of -ENODEV are completely wrong. If the device does not pass
> the above
> 2 checks it is _not_ a rt73usb device. And forcing the driver to work with
> the device will
> result in all kinds of problems.
Of course they are :-).
> If rt2x00 is loaded and detected the device, it should print out a debug
> message that starts with:
> "Chipset detected - " What is in your case the complete line?
Ok, I guess I should include more complete debug output.
phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x09 failed for offset
0x0000 with error -32
phy0 -> rt73usb_validate_eeprom: EEPROM recover - MAC: 66:76:2b:e8:68:e7
phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset
0x3000 with error -32
phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 1300, rf: 0000, rev:
c03c0ae0
phy0 -> rt73usb_init_eeprom: Error - Invalid RF chipset detected
...so, I think hardware is indeed quite similar to what rt73usb driver
expects...?
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
