[PATCH 15/21] arm64: dts: qcom: msm8994: Add BLSP2 UART2 node

[Konrad Dybcio]

Add a BLSP2 UART2 node to enable serial connection.

Signed-off-by: Konrad Dybcio <konradyb...@gmail.com>
---
 arch/arm64/boot/dts/qcom/msm8994.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi 
b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index df35c975c94c..20e859eb1318 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -243,6 +243,15 @@ blsp1_uart2: serial@f991e000 {
                                 <&gcc GCC_BLSP1_AHB_CLK>;
                };
 
+               blsp2_uart2: serial@f995e000 {
+                       compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+                       reg = <0xf995e000 0x1000>;
+                       interrupt = <GIC_SPI 146 IRQ_TYPE_EDGE_FALLING>;
+                       clock-names = "core", "iface";
+                       clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+                                       <&gcc GCC_BLSP2_AHB_CLK>;
+               };
+
                spmi_bus: qcom,spmi@fc4c0000 {
                        compatible = "qcom,spmi-pmic-arb";
                        reg = <0xfc4cf000 0x1000>,
-- 
2.27.0