From: Thierry Reding <[email protected]>

[ Upstream commit 0604ee4aefa20f493a32dc223599f922fb615367 ]

Not all fields were properly documented. Add kerneldoc for the missing
fields to prevent the build from flagging them.

Reported-by: Wolfram Sang <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
 drivers/i2c/busses/i2c-tegra.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 9a6b9a1b88aef..917f416787b10 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -154,6 +154,16 @@ enum msg_end_type {
  * @clk_divisor_std_fast_mode: Clock divisor in standard/fast mode. It is
  *             applicable if there is no fast clock source i.e. single clock
  *             source.
+ * @clk_divisor_fast_plus_mode: Clock divisor in fast mode plus. It is
+ *             applicable if there is no fast clock source (i.e. single
+ *             clock source).
+ * @has_multi_master_mode: The I2C controller supports running in single-master
+ *             or multi-master mode.
+ * @has_slcg_override_reg: The I2C controller supports a register that
+ *             overrides the second level clock gating.
+ * @has_mst_fifo: The I2C controller contains the new MST FIFO interface that
+ *             provides additional features and allows for longer messages to
+ *             be transferred in one go.
  */
 struct tegra_i2c_hw_feature {
        bool has_continue_xfer_support;
@@ -175,9 +185,11 @@ struct tegra_i2c_hw_feature {
  * @adapter: core I2C layer adapter information
  * @div_clk: clock reference for div clock of I2C controller
  * @fast_clk: clock reference for fast clock of I2C controller
+ * @rst: reset control for the I2C controller
  * @base: ioremapped registers cookie
  * @cont_id: I2C controller ID, used for packet header
  * @irq: IRQ number of transfer complete interrupt
+ * @irq_disabled: used to track whether or not the interrupt is enabled
  * @is_dvc: identifies the DVC I2C controller, has a different register layout
  * @msg_complete: transfer completion notifier
  * @msg_err: error code for completed message
@@ -185,6 +197,9 @@ struct tegra_i2c_hw_feature {
  * @msg_buf_remaining: size of unsent data in the message buffer
  * @msg_read: identifies read transfers
  * @bus_clk_rate: current I2C bus clock rate
+ * @clk_divisor_non_hs_mode: clock divider for non-high-speed modes
+ * @is_multimaster_mode: track if I2C controller is in multi-master mode
+ * @xfer_lock: lock to serialize transfer submission and processing
  */
 struct tegra_i2c_dev {
        struct device *dev;
-- 
2.25.1

Reply via email to