On Fri, 26 Jun 2020 11:55:12 -0700, Wesley Cheng wrote: > Introduce the dt-binding for enabling USB type C orientation and role > detection using the PM8150B. The driver will be responsible for receiving > the interrupt at a state change on the CC lines, reading the orientation/role, > and communicating this information to the remote clients, which can include > a role switch node and a type C switch. > > Signed-off-by: Wesley Cheng <[email protected]> > --- > .../bindings/usb/qcom,pmic-typec.yaml | 126 ++++++++++++++++++ > 1 file changed, 126 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml >
My bot found errors running 'make dt_binding_check' on your patch: Documentation/devicetree/bindings/usb/qcom,pmic-typec.example.dts:40.54-42.31: Warning (unit_address_vs_reg): /example-0/pm8150b/typec@1500/connector/ports/port@1/endpoint@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/usb/qcom,pmic-typec.example.dts:43.51-45.31: Warning (unit_address_vs_reg): /example-0/pm8150b/typec@1500/connector/ports/port@1/endpoint@1: node has a unit name, but no reg or ranges property See https://patchwork.ozlabs.org/patch/1317984 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
