Hi, On Tue, Jun 30, 2020 at 04:54:26PM -0500, Ricardo Rivera-Matos wrote: > Introduce the bq2515x family of chargers. > > The BQ2515X family of devices are highly integrated battery management > ICs that integrate the most common functions for wearable devices > namely a charger, an output voltage rail, ADC for battery and system > monitoring, and a push-button controller. > > Datasheets: > bq25150 - http://www.ti.com/lit/ds/symlink/bq25150.pdf > bq25155 - http://www.ti.com/lit/ds/symlink/bq25155.pdf > > Signed-off-by: Ricardo Rivera-Matos <r-rivera-ma...@ti.com> > --- > drivers/power/supply/Kconfig | 13 + > drivers/power/supply/Makefile | 1 + > drivers/power/supply/bq2515x_charger.c | 1158 ++++++++++++++++++++++++ > 3 files changed, 1172 insertions(+) > create mode 100644 drivers/power/supply/bq2515x_charger.c > > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig > index 44d3c8512fb8..faf2830aa152 100644 > --- a/drivers/power/supply/Kconfig > +++ b/drivers/power/supply/Kconfig > @@ -610,6 +610,19 @@ config CHARGER_BQ24735 > help > Say Y to enable support for the TI BQ24735 battery charger. > > +config CHARGER_BQ2515X > + tristate "TI BQ2515X battery charger family" > + depends on I2C > + depends on GPIOLIB || COMPILE_TEST > + select REGMAP_I2C > + help > + Say Y to enable support for the TI BQ2515X family of battery > + charging integrated circuits. The BQ2515X are highly integrated > + battery charge management ICs that integrate the most common > + functions for wearable devices, namely a charger, an output voltage > + rail, ADC for battery and system monitoring, and push-button > + controller. > + > config CHARGER_BQ25890 > tristate "TI BQ25890 battery charger driver" > depends on I2C > diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile > index b9644663e435..b3c694a65114 100644 > --- a/drivers/power/supply/Makefile > +++ b/drivers/power/supply/Makefile > @@ -82,6 +82,7 @@ obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o > obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o > obj-$(CONFIG_CHARGER_BQ24257) += bq24257_charger.o > obj-$(CONFIG_CHARGER_BQ24735) += bq24735-charger.o > +obj-$(CONFIG_CHARGER_BQ2515X) += bq2515x_charger.o > obj-$(CONFIG_CHARGER_BQ25890) += bq25890_charger.o > obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o > obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o > diff --git a/drivers/power/supply/bq2515x_charger.c > b/drivers/power/supply/bq2515x_charger.c > new file mode 100644 > index 000000000000..f386484b5035 > --- /dev/null > +++ b/drivers/power/supply/bq2515x_charger.c > @@ -0,0 +1,1158 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// BQ2515X Battery Charger Driver > +// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ > + > +#include <linux/err.h> > +#include <linux/i2c.h> > +#include <linux/init.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/gpio/consumer.h> > +#include <linux/power_supply.h> > +#include <linux/regmap.h> > +#include <linux/types.h> > + > +#define BQ2515X_MANUFACTURER "Texas Instruments" > + > +#define BQ2515X_STAT0 0x00 > +#define BQ2515X_STAT1 0x01 > +#define BQ2515X_STAT2 0x02 > +#define BQ2515X_FLAG0 0x03 > +#define BQ2515X_FLAG1 0x04 > +#define BQ2515X_FLAG2 0x05 > +#define BQ2515X_FLAG3 0x06 > +#define BQ2515X_MASK0 0x07 > +#define BQ2515X_MASK1 0x08 > +#define BQ2515X_MASK2 0x09 > +#define BQ2515X_MASK3 0x0a > +#define BQ2515X_VBAT_CTRL 0x12 > +#define BQ2515X_ICHG_CTRL 0x13 > +#define BQ2515X_PCHRGCTRL 0x14 > +#define BQ2515X_TERMCTRL 0x15 > +#define BQ2515X_BUVLO 0x16 > +#define BQ2515X_CHARGERCTRL0 0x17 > +#define BQ2515X_CHARGERCTRL1 0x18 > +#define BQ2515X_ILIMCTRL 0x19 > +#define BQ2515X_LDOCTRL 0x1d > +#define BQ2515X_MRCTRL 0x30 > +#define BQ2515X_ICCTRL0 0x35 > +#define BQ2515X_ICCTRL1 0x36 > +#define BQ2515X_ICCTRL2 0x37 > +#define BQ2515X_ADCCTRL0 0x40 > +#define BQ2515X_ADCCTRL1 0x41 > +#define BQ2515X_ADC_VBAT_M 0x42 > +#define BQ2515X_ADC_VBAT_L 0x43 > +#define BQ2515X_ADC_TS_M 0x44 > +#define BQ2515X_ADC_TS_L 0x45 > +#define BQ2515X_ADC_ICHG_M 0x46 > +#define BQ2515X_ADC_ICHG_L 0x47 > +#define BQ2515X_ADC_ADCIN_M 0x48 > +#define BQ2515X_ADC_ADCIN_L 0x49 > +#define BQ2515X_ADC_VIN_M 0x4a > +#define BQ2515X_ADC_VIN_L 0x4b > +#define BQ2515X_ADC_PMID_M 0x4c > +#define BQ2515X_ADC_PMID_L 0x4d > +#define BQ2515X_ADC_IIN_M 0x4e > +#define BQ2515X_ADC_IIN_L 0x4f > +#define BQ2515X_ADC_COMP1_M 0x52 > +#define BQ2515X_ADC_COMP1_L 0X53 > +#define BQ2515X_ADC_COMP2_M 0X54 > +#define BQ2515X_ADC_COMP2_L 0x55 > +#define BQ2515X_ADC_COMP3_M 0x56 > +#define BQ2515X_ADC_COMP3_L 0x57 > +#define BQ2515X_ADC_READ_EN 0x58 > +#define BQ2515X_TS_FASTCHGCTRL 0x61 > +#define BQ2515X_TS_COLD 0x62 > +#define BQ2515X_TS_COOL 0x63 > +#define BQ2515X_TS_WARM 0x64 > +#define BQ2515X_TS_HOT 0x65 > +#define BQ2515X_DEVICE_ID 0x6f > + > +#define BQ2515X_DEFAULT_ICHG_UA 10000 > +#define BQ25150_DEFAULT_ILIM_UA 100000 > +#define BQ25155_DEFAULT_ILIM_UA 500000 > +#define BQ2515X_DEFAULT_VBAT_REG_UV 4200000 > +#define BQ2515X_DEFAULT_IPRECHARGE_UA 2500 > + > +#define BQ2515X_DIVISOR 65536 > +#define BQ2515X_VBAT_BASE_VOLT 3600000 > +#define BQ2515X_VBAT_REG_MAX 4600000 > +#define BQ2515X_VBAT_REG_MIN 3600000 > +#define BQ2515X_VBAT_STEP_UV 10000 > +#define BQ2515X_UV_FACTOR 1000000 > +#define BQ2515X_VBAT_MULTIPLIER 6 > +#define BQ2515X_ICHG_DIVISOR 52429 > +#define BQ2515X_ICHG_CURR_STEP_THRESH_UA 318750 > +#define BQ2515X_ICHG_MIN_UA 0 > +#define BQ2515X_ICHG_MAX_UA 500000 > +#define BQ2515X_ICHG_RNG_1B0_UA 1250 > +#define BQ2515X_ICHG_RNG_1B1_UA 2500 > +#define BQ2515X_VLOWV_SEL_1B0_UV 3000000 > +#define BQ2515X_VLOWV_SEL_1B1_UV 2800000 > +#define BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA 18750 > +#define BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA 37500 > +#define BQ2515X_TWAKE2_MIN_US 1700000 > +#define BQ2515X_TWAKE2_MAX_US 2300000 > + > +#define BQ2515X_ILIM_150MA 0x2 > +#define BQ2515X_ILIM_MASK 0x7 > +#define BQ2515X_ILIM_MIN 50000 > +#define BQ2515X_ILIM_MAX 600000 > +#define BQ2515X_HEALTH_MASK 0xf > +#define BQ2515X_ICHGRNG_MASK 0x80 > +#define BQ2515X_STAT0_MASK 0x0f > +#define BQ2515X_STAT1_MASK 0x1f > +#define BQ2515X_PRECHARGE_MASK 0x1f > + > +#define BQ2515X_TS_HOT_STAT BIT(0) > +#define BQ2515X_TS_WARM_STAT BIT(1) > +#define BQ2515X_TS_COOL_STAT BIT(2) > +#define BQ2515X_TS_COLD_STAT BIT(3) > +#define BQ2515X_SAFETY_TIMER_EXP BIT(5) > + > +#define BQ2515X_EN_VBAT_READ BIT(3) > +#define BQ2515X_EN_ICHG_READ BIT(5) > + > +#define BQ2515X_VIN_GOOD BIT(0) > +#define BQ2515X_CHRG_DONE BIT(5) > +#define BQ2515X_CV_CHRG_MODE BIT(6) > + > +#define BQ2515X_VIN_OVP_FAULT_STAT BIT(7) > + > +#define BQ2515X_WATCHDOG_DISABLE BIT(4) > + > +#define BQ2515X_ICHARGE_RANGE BIT(7) > + > +#define BQ2515X_VLOWV_SEL BIT(5) > + > +#define BQ2515X_CHARGER_DISABLE BIT(0) > + > +#define BQ2515X_HWRESET_14S_WD BIT(1) > + > +static const int bq2515x_ilim_lvl_values[] = { > + 50000, 100000, 150000, 200000, 300000, 400000, 500000, 600000 > +}; > + > +/** > + * struct bq2515x_init_data - > + * @ilim: input current limit > + */ > +struct bq2515x_init_data { > + int ilim; > +}; > + > +enum bq2515x_id { > + BQ25150, > + BQ25155, > +}; > + > +/** > + * struct bq2515x_device - > + * @mains: mains properties > + * @battery: battery properties > + * @regmap: register map structure > + * @dev: device structure > + * > + * @reset_gpio: manual reset (MR) pin > + * @powerdown_gpio: low power mode pin > + * @ac_detect_gpio: power good (PG) pin > + * @ce_gpio: charge enable (CE) pin > + * > + * @model_name: string value describing device model > + * @device_id: value of device_id > + * @mains_online: boolean value indicating power supply online > + * > + * @bq2515x_init_data init_data: charger initialization data structure > + */ > +struct bq2515x_device { > + struct power_supply *mains; > + struct power_supply *battery; > + struct regmap *regmap; > + struct device *dev; > + > + struct gpio_desc *reset_gpio; > + struct gpio_desc *powerdown_gpio; > + struct gpio_desc *ac_detect_gpio; > + struct gpio_desc *ce_gpio; > + > + char model_name[I2C_NAME_SIZE]; > + int device_id; > + bool mains_online; > + > + struct bq2515x_init_data init_data; > +}; > + > +static struct reg_default bq25150_reg_defaults[] = { > + {BQ2515X_FLAG0, 0x0}, > + {BQ2515X_FLAG1, 0x0}, > + {BQ2515X_FLAG2, 0x0}, > + {BQ2515X_FLAG3, 0x0}, > + {BQ2515X_MASK0, 0x0}, > + {BQ2515X_MASK1, 0x0}, > + {BQ2515X_MASK2, 0x71}, > + {BQ2515X_MASK3, 0x0}, > + {BQ2515X_VBAT_CTRL, 0x3C}, > + {BQ2515X_ICHG_CTRL, 0x8}, > + {BQ2515X_PCHRGCTRL, 0x2}, > + {BQ2515X_TERMCTRL, 0x14}, > + {BQ2515X_BUVLO, 0x0}, > + {BQ2515X_CHARGERCTRL0, 0x82}, > + {BQ2515X_CHARGERCTRL1, 0x42}, > + {BQ2515X_ILIMCTRL, 0x1}, > + {BQ2515X_LDOCTRL, 0xB0}, > + {BQ2515X_MRCTRL, 0x2A}, > + {BQ2515X_ICCTRL0, 0x10}, > + {BQ2515X_ICCTRL1, 0x0}, > + {BQ2515X_ICCTRL2, 0x0}, > + {BQ2515X_ADCCTRL0, 0x2}, > + {BQ2515X_ADCCTRL1, 0x40}, > + {BQ2515X_ADC_COMP1_M, 0x23}, > + {BQ2515X_ADC_COMP1_L, 0x20}, > + {BQ2515X_ADC_COMP2_M, 0x38}, > + {BQ2515X_ADC_COMP2_L, 0x90}, > + {BQ2515X_ADC_COMP3_M, 0x0}, > + {BQ2515X_ADC_COMP3_L, 0x0}, > + {BQ2515X_ADC_READ_EN, 0x0}, > + {BQ2515X_TS_FASTCHGCTRL, 0x34}, > + {BQ2515X_TS_COLD, 0x7C}, > + {BQ2515X_TS_COOL, 0x6D}, > + {BQ2515X_TS_WARM, 0x38}, > + {BQ2515X_TS_HOT, 0x27}, > + {BQ2515X_DEVICE_ID, 0x20}, > +}; > + > +static struct reg_default bq25155_reg_defaults[] = { > + {BQ2515X_FLAG0, 0x0}, > + {BQ2515X_FLAG1, 0x0}, > + {BQ2515X_FLAG2, 0x0}, > + {BQ2515X_FLAG3, 0x0}, > + {BQ2515X_MASK0, 0x0}, > + {BQ2515X_MASK1, 0x0}, > + {BQ2515X_MASK2, 0x71}, > + {BQ2515X_MASK3, 0x0}, > + {BQ2515X_VBAT_CTRL, 0x3C}, > + {BQ2515X_ICHG_CTRL, 0x8}, > + {BQ2515X_PCHRGCTRL, 0x2}, > + {BQ2515X_TERMCTRL, 0x14}, > + {BQ2515X_BUVLO, 0x0}, > + {BQ2515X_CHARGERCTRL0, 0x82}, > + {BQ2515X_CHARGERCTRL1, 0xC2}, > + {BQ2515X_ILIMCTRL, 0x6}, > + {BQ2515X_LDOCTRL, 0xB0}, > + {BQ2515X_MRCTRL, 0x2A}, > + {BQ2515X_ICCTRL0, 0x10}, > + {BQ2515X_ICCTRL1, 0x0}, > + {BQ2515X_ICCTRL2, 0x40}, > + {BQ2515X_ADCCTRL0, 0x2}, > + {BQ2515X_ADCCTRL1, 0x40}, > + {BQ2515X_ADC_COMP1_M, 0x23}, > + {BQ2515X_ADC_COMP1_L, 0x20}, > + {BQ2515X_ADC_COMP2_M, 0x38}, > + {BQ2515X_ADC_COMP2_L, 0x90}, > + {BQ2515X_ADC_COMP3_M, 0x0}, > + {BQ2515X_ADC_COMP3_L, 0x0}, > + {BQ2515X_ADC_READ_EN, 0x0}, > + {BQ2515X_TS_FASTCHGCTRL, 0x34}, > + {BQ2515X_TS_COLD, 0x7C}, > + {BQ2515X_TS_COOL, 0x6D}, > + {BQ2515X_TS_WARM, 0x38}, > + {BQ2515X_TS_HOT, 0x27}, > + {BQ2515X_DEVICE_ID, 0x35}, > +}; > + > +static int bq2515x_wake_up(struct bq2515x_device *bq2515x) > +{ > + int ret; > + int val; > + > + /* Read the STAT register if we can read it then the device is out > + * of ship mode. If the register cannot be read then attempt to wake > + * it up and enable the ADC. > + */ > + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val); > + if (ret) > + return ret; > + > + /* Need to toggle LP and bring device out of ship mode. The device > + * will exit the ship mode when the MR pin is held low for at least > + * t_WAKE2 as shown in section 8.3.7.1 of the datasheet. > + */ > + gpiod_set_value_cansleep(bq2515x->powerdown_gpio, 0); > + > + gpiod_set_value_cansleep(bq2515x->reset_gpio, 0); > + usleep_range(BQ2515X_TWAKE2_MIN_US, BQ2515X_TWAKE2_MAX_US); > + gpiod_set_value_cansleep(bq2515x->reset_gpio, 1); > + > + return regmap_write(bq2515x->regmap, BQ2515X_ADC_READ_EN, > + (BQ2515X_EN_VBAT_READ | BQ2515X_EN_ICHG_READ)); > +} > + > +static int bq2515x_update_ps_status(struct bq2515x_device *bq2515x) > +{ > + bool dc = false; > + unsigned int val; > + int ret; > + > + if (bq2515x->ac_detect_gpio) > + val = gpiod_get_value_cansleep(bq2515x->ac_detect_gpio); > + else { > + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val); > + if (ret) > + return ret; > + } > + > + dc = val & BQ2515X_VIN_GOOD; > + > + ret = bq2515x->mains_online != dc; > + > + bq2515x->mains_online = dc; > + > + return ret; > +} > + > +static int bq2515x_disable_watchdog_timers(struct bq2515x_device *bq2515x) > +{ > + int ret; > + > + ret = regmap_update_bits(bq2515x->regmap, BQ2515X_CHARGERCTRL0, > + BQ2515X_WATCHDOG_DISABLE, BQ2515X_WATCHDOG_DISABLE); > + if (ret) > + return ret; > + > + return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2, > + BQ2515X_HWRESET_14S_WD, 0); > +} > + > +static int bq2515x_get_battery_voltage_now(struct bq2515x_device *bq2515x) > +{ > + int ret; > + int vbat_msb; > + int vbat_lsb; > + uint32_t vbat_measurement; > + > + if (!bq2515x->mains_online) > + bq2515x_wake_up(bq2515x); > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_M, &vbat_msb); > + if (ret) > + return ret; > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_L, &vbat_lsb); > + if (ret) > + return ret; > + > + vbat_measurement = (vbat_msb << 8) | vbat_lsb; > + > + return vbat_measurement * (BQ2515X_UV_FACTOR / BQ2515X_DIVISOR) * > + BQ2515X_VBAT_MULTIPLIER; > +} > + > +static int bq2515x_get_battery_current_now(struct bq2515x_device *bq2515x) > +{ > + int ret; > + int ichg_msb; > + int ichg_lsb; > + uint32_t ichg_measurement; > + u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA; > + unsigned int ichg_reg_code, reg_code; > + unsigned int icharge_range = 0, pchrgctrl; > + unsigned int buvlo, vlowv_sel, vlowv = BQ2515X_VLOWV_SEL_1B0_UV; > + > + if (!bq2515x->mains_online) > + return -ENODATA; > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_M, &ichg_msb); > + if (ret) > + return ret; > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_L, &ichg_lsb); > + if (ret) > + return ret; > + > + ichg_measurement = (ichg_msb << 8) | ichg_lsb; > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_BUVLO, &buvlo); > + if (ret) > + return ret; > + > + vlowv_sel = buvlo & BQ2515X_VLOWV_SEL; > + > + if (vlowv_sel) > + vlowv = BQ2515X_VLOWV_SEL_1B1_UV; > + > + if (bq2515x_get_battery_voltage_now(bq2515x) < vlowv) { > + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, > + &pchrgctrl); > + if (ret) > + return ret; > + > + reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK; > + } else { > + ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, > + &ichg_reg_code); > + if (ret) > + return ret; > + > + reg_code = ichg_reg_code; > + } > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl); > + if (ret) > + return ret; > + > + icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE; > + > + if (icharge_range) > + ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA; > + > + return reg_code * (ichg_multiplier * ichg_measurement / > + BQ2515X_ICHG_DIVISOR); > +} > + > +static bool bq2515x_get_charge_disable(struct bq2515x_device *bq2515x) > +{ > + int ret; > + int ce_pin; > + int icctrl2; > + int charger_disable; > + > + ce_pin = gpiod_get_value_cansleep(bq2515x->ce_gpio); > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_ICCTRL2, &icctrl2); > + if (ret) > + return ret; > + > + charger_disable = icctrl2 & BQ2515X_CHARGER_DISABLE; > + > + if (charger_disable || ce_pin) > + return true; > + > + return false; > +} > + > +static int bq2515x_set_charge_disable(struct bq2515x_device *bq2515x, int > val) > +{ > + gpiod_set_value_cansleep(bq2515x->ce_gpio, val); > + > + return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2, > + BQ2515X_CHARGER_DISABLE, val); > +} > + > +static int bq2515x_get_const_charge_current(struct bq2515x_device *bq2515x) > +{ > + int ret; > + u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA; > + unsigned int ichg_reg_code; > + unsigned int pchrgctrl; > + unsigned int icharge_range; > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, &ichg_reg_code); > + if (ret) > + return ret; > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl); > + if (ret) > + return ret; > + > + icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE; > + > + if (icharge_range) > + ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA; > + > + return ichg_reg_code * ichg_multiplier; > +} > + > +static int bq2515x_set_const_charge_current(struct bq2515x_device *bq2515x, > + int val) > +{ > + int ret; > + unsigned int ichg_reg_code; > + u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA; > + unsigned int icharge_range = 0; > + > + if (val > BQ2515X_ICHG_MAX_UA || val < BQ2515X_ICHG_MIN_UA) > + return -EINVAL; > + > + if (val > BQ2515X_ICHG_CURR_STEP_THRESH_UA) { > + ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA; > + icharge_range = BQ2515X_ICHARGE_RANGE; > + } > + > + bq2515x_set_charge_disable(bq2515x, 1); > + > + ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL, > + BQ2515X_ICHARGE_RANGE, icharge_range); > + if (ret) > + return ret; > + > + ichg_reg_code = val / ichg_multiplier; > + > + ret = regmap_write(bq2515x->regmap, BQ2515X_ICHG_CTRL, ichg_reg_code); > + if (ret) > + return ret; > + > + return bq2515x_set_charge_disable(bq2515x, 0); > +} > + > +static int bq2515x_get_precharge_current(struct bq2515x_device *bq2515x) > +{ > + int ret; > + unsigned int pchrgctrl; > + unsigned int icharge_range; > + u16 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA; > + unsigned int precharge_reg_code; > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl); > + if (ret) > + return ret; > + > + icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE; > + > + if (icharge_range) > + precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA; > + > + precharge_reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK; > + > + return precharge_reg_code * precharge_multiplier; > +} > + > +static int bq2515x_set_precharge_current(struct bq2515x_device *bq2515x, > + int val) > +{ > + int ret; > + unsigned int pchrgctrl; > + unsigned int icharge_range; > + unsigned int precharge_reg_code; > + unsigned int precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA; > + unsigned int precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA; > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl); > + if (ret) > + return ret; > + > + icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE; > + > + if (icharge_range) { > + precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA; > + precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA; > + } else { > + precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA; > + precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA; > + } > + if (val > precharge_max_ua || val < BQ2515X_ICHG_MIN_UA) > + return -EINVAL; > + > + precharge_reg_code = val / precharge_multiplier; > + > + ret = bq2515x_set_charge_disable(bq2515x, 1); > + if (ret) > + return ret; > + > + ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL, > + BQ2515X_PRECHARGE_MASK, precharge_reg_code); > + if (ret) > + return ret; > + > + return bq2515x_set_charge_disable(bq2515x, 0); > +} > + > +static int bq2515x_charging_status(struct bq2515x_device *bq2515x, > + union power_supply_propval *val) > +{ > + bool status0_no_fault; > + bool status1_no_fault; > + bool ce_status; > + bool charge_done; > + unsigned int status; > + int ret; > + > + if (!bq2515x->mains_online) { > + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; > + return 0; > + } > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &status); > + if (ret) > + return ret; > + > + /* > + * The code block below is used to determine if any faults from the > + * STAT0 register are disbaling charging or if the charge has completed > + * according to the CHARGE_DONE_STAT bit. > + */ > + if (((status & BQ2515X_STAT0_MASK) == true) & > + ((status & BQ2515X_CHRG_DONE) == false)) { > + status0_no_fault = true; > + charge_done = false; > + } else if (status & BQ2515X_CHRG_DONE) { > + charge_done = true; > + status0_no_fault = false; > + } else { > + status0_no_fault = false; > + charge_done = false; > + } > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &status); > + if (ret) > + return ret; > + /* > + * The code block below is used to determine if any faults from the > + * STAT1 register are disbaling charging > + */ > + if ((status & BQ2515X_STAT1_MASK) == false) > + status1_no_fault = true; > + else > + status1_no_fault = false; > + > + ce_status = (!bq2515x_get_charge_disable(bq2515x)); > + > + /* > + * If there are no faults and charging is enabled, then status is > + * charging. Otherwise, if charging is complete, then status is full. > + * Otherwise, if a fault exists or charging is disabled, then status is > + * not charging > + */ > + if (status0_no_fault & status1_no_fault & ce_status) > + val->intval = POWER_SUPPLY_STATUS_CHARGING; > + else if (charge_done) > + val->intval = POWER_SUPPLY_STATUS_FULL; > + else if (!(status0_no_fault & status1_no_fault & ce_status)) > + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; > + > + return 0; > +} > + > +static int bq2515x_get_batt_reg(struct bq2515x_device *bq2515x) > +{ > + int vbat_reg_code; > + int ret; > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_VBAT_CTRL, &vbat_reg_code); > + if (ret) > + return ret; > + > + return BQ2515X_VBAT_BASE_VOLT + vbat_reg_code * BQ2515X_VBAT_STEP_UV; > +} > + > +static int bq2515x_set_batt_reg(struct bq2515x_device *bq2515x, int val) > +{ > + int vbat_reg_code; > + > + if (val > BQ2515X_VBAT_REG_MAX || val < BQ2515X_VBAT_REG_MIN) > + return -EINVAL; > + > + vbat_reg_code = (val - BQ2515X_VBAT_BASE_VOLT) / BQ2515X_VBAT_STEP_UV; > + > + return regmap_write(bq2515x->regmap, BQ2515X_VBAT_CTRL, vbat_reg_code); > +} > + > +static int bq2515x_get_ilim_lvl(struct bq2515x_device *bq2515x) > +{ > + int ret; > + int ilimctrl; > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_ILIMCTRL, &ilimctrl); > + if (ret) > + return ret; > + > + return bq2515x_ilim_lvl_values[ilimctrl & BQ2515X_ILIM_MASK]; > +} > + > +static int bq2515x_set_ilim_lvl(struct bq2515x_device *bq2515x, int val) > +{ > + int i = 0; > + unsigned int array_size = ARRAY_SIZE(bq2515x_ilim_lvl_values); > + > + for (i = array_size - 1; i > 0; i--) { > + if (val >= bq2515x_ilim_lvl_values[i]) > + break; > + } > + return regmap_write(bq2515x->regmap, BQ2515X_ILIMCTRL, i); > +} > + > +static int bq2515x_power_supply_property_is_writeable(struct power_supply > *psy, > + enum power_supply_property prop) > +{ > + switch (prop) { > + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: > + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: > + return true; > + default: > + return false; > + } > +} > + > +static int bq2515x_charger_get_health(struct bq2515x_device *bq2515x, > + union power_supply_propval *val) > +{ > + int health = POWER_SUPPLY_HEALTH_GOOD; > + int ret; > + unsigned int stat1; > + unsigned int flag3; > + > + if (!bq2515x->mains_online) > + bq2515x_wake_up(bq2515x); > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_FLAG3, &flag3); > + if (ret) > + return ret; > + > + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &stat1); > + if (ret) > + return ret; > + > + if (stat1 & BQ2515X_HEALTH_MASK) { > + switch (stat1 & BQ2515X_HEALTH_MASK) { > + case BQ2515X_TS_HOT_STAT: > + health = POWER_SUPPLY_HEALTH_HOT; > + break; > + case BQ2515X_TS_WARM_STAT: > + health = POWER_SUPPLY_HEALTH_WARM; > + break; > + case BQ2515X_TS_COOL_STAT: > + health = POWER_SUPPLY_HEALTH_COOL; > + break; > + case BQ2515X_TS_COLD_STAT: > + health = POWER_SUPPLY_HEALTH_COLD; > + break; > + default: > + health = POWER_SUPPLY_HEALTH_UNKNOWN; > + break; > + } > + } > + > + if (stat1 & BQ2515X_VIN_OVP_FAULT_STAT) > + health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; > + > + if (flag3 & BQ2515X_SAFETY_TIMER_EXP) > + health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; > + > + val->intval = health; > + return 0; > +} > + > +static int bq2515x_mains_set_property(struct power_supply *psy, > + enum power_supply_property prop, > + const union power_supply_propval *val) > +{ > + struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy); > + int ret; > + > + switch (prop) { > + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: > + ret = bq2515x_set_ilim_lvl(bq2515x, val->intval); > + break; > + default: > + return -EINVAL; > + } > + > + return ret; > +} > + > +static int bq2515x_battery_set_property(struct power_supply *psy, > + enum power_supply_property prop, > + const union power_supply_propval *val) > +{ > + struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy); > + int ret; > + > + switch (prop) { > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: > + ret = bq2515x_set_batt_reg(bq2515x, val->intval); > + break; > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: > + ret = bq2515x_set_const_charge_current(bq2515x, val->intval); > + break; > + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: > + ret = bq2515x_set_precharge_current(bq2515x, val->intval); > + break; > + default: > + return -EINVAL; > + } > + > + return ret; > +}
Expose those through the charger device. The battery device
can expose maximum data (e.g. POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX),
but should not control the charging itself.
> +static int bq2515x_mains_get_property(struct power_supply *psy,
> + enum power_supply_property prop,
> + union power_supply_propval *val)
> +{
> + struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
> + int ret = 0;
> +
> + switch (prop) {
> + case POWER_SUPPLY_PROP_ONLINE:
> + val->intval = bq2515x->mains_online;
> + break;
> + case POWER_SUPPLY_PROP_HEALTH:
> + ret = bq2515x_charger_get_health(bq2515x, val);
> + if (ret)
> + val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
> + break;
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + ret = bq2515x_get_ilim_lvl(bq2515x);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> + case POWER_SUPPLY_PROP_MODEL_NAME:
> + val->strval = bq2515x->model_name;
> + break;
> + case POWER_SUPPLY_PROP_MANUFACTURER:
> + val->strval = BQ2515X_MANUFACTURER;
> + break;
> + case POWER_SUPPLY_PROP_STATUS:
> + ret = bq2515x_charging_status(bq2515x, val);
> + if (ret)
> + return ret;
> + break;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> +static int bq2515x_battery_get_property(struct power_supply *psy,
> + enum power_supply_property prop,
> + union power_supply_propval *val)
> +{
> + struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
> + int ret;
> +
> + ret = bq2515x_update_ps_status(bq2515x);
> + if (ret)
> + return ret;
> +
> + switch (prop) {
> +
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + ret = bq2515x_get_battery_voltage_now(bq2515x);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> + case POWER_SUPPLY_PROP_CURRENT_NOW:
> + ret = bq2515x_get_battery_current_now(bq2515x);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + ret = bq2515x_get_const_charge_current(bq2515x);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> + ret = bq2515x_get_precharge_current(bq2515x);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> + ret = bq2515x_get_batt_reg(bq2515x);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret;
> + break;
> + default:
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +static enum power_supply_property bq2515x_battery_properties[] = {
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_CURRENT_NOW,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
> + POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
> +};
> +
> +static enum power_supply_property bq2515x_mains_properties[] = {
> + POWER_SUPPLY_PROP_ONLINE,
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_HEALTH,
> + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
> + POWER_SUPPLY_PROP_MODEL_NAME,
> + POWER_SUPPLY_PROP_MANUFACTURER,
> +};
> +
> +static struct power_supply_desc bq2515x_mains_desc = {
> + .name = "bq2515x-mains",
> + .type = POWER_SUPPLY_TYPE_MAINS,
> + .get_property = bq2515x_mains_get_property,
> + .set_property = bq2515x_mains_set_property,
> + .properties = bq2515x_mains_properties,
> + .num_properties = ARRAY_SIZE(bq2515x_mains_properties),
> + .property_is_writeable = bq2515x_power_supply_property_is_writeable,
> +};
> +
> +static struct power_supply_desc bq2515x_battery_desc = {
> + .name = "bq2515x-battery",
> + .type = POWER_SUPPLY_TYPE_BATTERY,
> + .get_property = bq2515x_battery_get_property,
> + .set_property = bq2515x_battery_set_property,
> + .properties = bq2515x_battery_properties,
> + .num_properties = ARRAY_SIZE(bq2515x_battery_properties),
> + .property_is_writeable = bq2515x_power_supply_property_is_writeable,
> +};
> +
> +static int bq2515x_power_supply_register(struct bq2515x_device *bq2515x,
> + struct device *dev, struct power_supply_config psy_cfg)
> +{
> + bq2515x->mains = devm_power_supply_register(bq2515x->dev,
> + &bq2515x_mains_desc,
> + &psy_cfg);
> + if (IS_ERR(bq2515x->mains))
> + return -EINVAL;
> +
> + bq2515x->battery = devm_power_supply_register(bq2515x->dev,
> + &bq2515x_battery_desc,
> + &psy_cfg);
> + if (IS_ERR(bq2515x->battery))
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int bq2515x_hw_init(struct bq2515x_device *bq2515x)
> +{
> + int ret;
> + struct power_supply_battery_info bat_info = { };
> +
> + ret = bq2515x_disable_watchdog_timers(bq2515x);
> + if (ret)
> + return ret;
> +
> + if (bq2515x->init_data.ilim) {
> + ret = bq2515x_set_ilim_lvl(bq2515x, bq2515x->init_data.ilim);
> + if (ret)
> + return ret;
> + }
> +
> + ret = power_supply_get_battery_info(bq2515x->mains, &bat_info);
> + if (ret) {
> + dev_warn(bq2515x->dev, "battery info missing, default values
> will be applied\n");
> +
> + bat_info.constant_charge_current_max_ua =
> + BQ2515X_DEFAULT_ICHG_UA;
> +
> + bat_info.constant_charge_voltage_max_uv =
> + BQ2515X_DEFAULT_VBAT_REG_UV;
> +
> + bat_info.precharge_current_ua =
> + BQ2515X_DEFAULT_IPRECHARGE_UA;
> + }
> +
> + ret = bq2515x_set_const_charge_current(bq2515x,
> + bat_info.constant_charge_current_max_ua);
> + if (ret)
> + return ret;
> +
> + ret = bq2515x_set_batt_reg(bq2515x,
> + bat_info.constant_charge_voltage_max_uv);
> + if (ret)
> + return ret;
> +
> + return bq2515x_set_precharge_current(bq2515x,
> + bat_info.precharge_current_ua);
> +}
> +
> +static int bq2515x_read_properties(struct bq2515x_device *bq2515x)
> +{
> + int ret;
> +
> + ret = device_property_read_u32(bq2515x->dev,
> + "input-current-limit-microamp",
> + &bq2515x->init_data.ilim);
> + if (ret)
> + switch (bq2515x->device_id) {
> + case BQ25150:
> + bq2515x->init_data.ilim = BQ25150_DEFAULT_ILIM_UA;
> + break;
> + case BQ25155:
> + bq2515x->init_data.ilim = BQ25155_DEFAULT_ILIM_UA;
> + break;
> + }
Please add {} for the if.
> + bq2515x->ac_detect_gpio = devm_gpiod_get_optional(bq2515x->dev,
> + "ac-detect", GPIOD_IN);
> + if (IS_ERR(bq2515x->ac_detect_gpio)) {
> + ret = PTR_ERR(bq2515x->ac_detect_gpio);
> + if (ret != -ENODEV) {
> + dev_err(bq2515x->dev, "Failed to get ac detect");
> + return ret;
> + }
> + bq2515x->ac_detect_gpio = NULL;
All of this is not needed. If no GPIO is specified,
devm_gpiod_get_optional() will return NULL instead
of an error code. This is enough:
if (IS_ERR(bq2515x->ac_detect_gpio)) {
ret = PTR_ERR(bq2515x->ac_detect_gpio);
dev_err(bq2515x->dev, "Failed to get ac detect: %d\n", ret);
return ret;
}
> + }
> +
> + bq2515x->reset_gpio = devm_gpiod_get_optional(bq2515x->dev,
> + "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(bq2515x->reset_gpio)) {
> + ret = PTR_ERR(bq2515x->reset_gpio);
> + if (ret != -ENODEV) {
> + dev_err(bq2515x->dev, "Failed to get reset");
> + return ret;
> + }
> + bq2515x->reset_gpio = NULL;
> + }
The same as previous GPIO.
> + bq2515x->powerdown_gpio = devm_gpiod_get_optional(bq2515x->dev,
> + "powerdown", GPIOD_OUT_LOW);
> + if (IS_ERR(bq2515x->powerdown_gpio)) {
> + ret = PTR_ERR(bq2515x->powerdown_gpio);
> + if (ret != -ENODEV) {
> + dev_err(bq2515x->dev, "Failed to get powerdown");
> + return ret;
> + }
> + bq2515x->powerdown_gpio = NULL;
> + }
The same as previous GPIO.
> + bq2515x->ce_gpio = devm_gpiod_get_optional(bq2515x->dev,
> + "charge-enable",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(bq2515x->ce_gpio)) {
> + ret = PTR_ERR(bq2515x->ce_gpio);
> + if (ret != -ENODEV) {
> + dev_err(bq2515x->dev, "Failed to get ce");
> + return ret;
> + }
> + bq2515x->ce_gpio = NULL;
> + }
The same as previous GPIO.
> + return 0;
> +}
> +
> +static bool bq2515x_volatile_register(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case BQ2515X_STAT0 ... BQ2515X_FLAG3:
> + case BQ2515X_ADC_VBAT_M ... BQ2515X_ADC_IIN_L:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static const struct regmap_config bq25150_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +
> + .max_register = BQ2515X_DEVICE_ID,
> + .reg_defaults = bq25150_reg_defaults,
> + .num_reg_defaults = ARRAY_SIZE(bq25150_reg_defaults),
> + .cache_type = REGCACHE_RBTREE,
> + .volatile_reg = bq2515x_volatile_register,
> +};
> +
> +static const struct regmap_config bq25155_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +
> + .max_register = BQ2515X_DEVICE_ID,
> + .reg_defaults = bq25155_reg_defaults,
> + .num_reg_defaults = ARRAY_SIZE(bq25155_reg_defaults),
> + .cache_type = REGCACHE_RBTREE,
> + .volatile_reg = bq2515x_volatile_register,
> +};
> +
> +static int bq2515x_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct bq2515x_device *bq2515x;
> + struct power_supply_config charger_cfg = {};
> + int ret;
> +
> + bq2515x = devm_kzalloc(dev, sizeof(*bq2515x), GFP_KERNEL);
> + if (!bq2515x)
> + return -ENOMEM;
> +
> + bq2515x->dev = dev;
> +
> + strncpy(bq2515x->model_name, id->name, I2C_NAME_SIZE);
> +
> + bq2515x->device_id = id->driver_data;
> +
> + switch (bq2515x->device_id) {
> + case BQ25150:
> + bq2515x->regmap = devm_regmap_init_i2c(client,
> + &bq25150_regmap_config);
> + break;
> + case BQ25155:
> + bq2515x->regmap = devm_regmap_init_i2c(client,
> + &bq25155_regmap_config);
> + break;
> + }
> +
> + if (IS_ERR(bq2515x->regmap)) {
> + dev_err(dev, "failed to allocate register map\n");
> + return PTR_ERR(bq2515x->regmap);
> + }
> +
> + i2c_set_clientdata(client, bq2515x);
> +
> + charger_cfg.drv_data = bq2515x;
> + charger_cfg.of_node = dev->of_node;
> +
> + ret = bq2515x_read_properties(bq2515x);
> + if (ret) {
> + dev_err(dev, "Failed to read device tree properties %d\n",
> + ret);
> + return ret;
> + }
> +
> + ret = bq2515x_power_supply_register(bq2515x, dev, charger_cfg);
> + if (ret) {
> + dev_err(dev, "failed to register power supply\n");
> + return ret;
> + }
> +
> + ret = bq2515x_hw_init(bq2515x);
> + if (ret) {
> + dev_err(dev, "Cannot initialize the chip\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id bq2515x_i2c_ids[] = {
> + { "bq25150", BQ25150, },
> + { "bq25155", BQ25155, },
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, bq2515x_i2c_ids);
> +
> +static const struct of_device_id bq2515x_of_match[] = {
> + { .compatible = "ti,bq25150", },
> + { .compatible = "ti,bq25155", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, bq2515x_of_match);
> +
> +static struct i2c_driver bq2515x_driver = {
> + .driver = {
> + .name = "bq2515x-charger",
> + .of_match_table = bq2515x_of_match,
> + },
> + .probe = bq2515x_probe,
> + .id_table = bq2515x_i2c_ids,
> +};
> +module_i2c_driver(bq2515x_driver);
> +
> +MODULE_AUTHOR("Dan Murphy <dmur...@ti.com>");
> +MODULE_AUTHOR("Ricardo Rivera-Matos <r-rivera-ma...@ti.com>");
> +MODULE_DESCRIPTION("BQ2515X charger driver");
> +MODULE_LICENSE("GPL v2");
Otherwise this looks good to me now. I hope I can merge the next
version :)
-- Sebastian
signature.asc
Description: PGP signature
