Pinebook has an RTL8723CS WiFi + BT chip, BT is connected to UART1
and uses PL5 as device wake GPIO, PL6 as host wake GPIO the I2C
controlling signals are connected to R_I2C bus.
Enable it in the device tree.
Signed-off-by: Vasily Khoruzhick <anars...@gmail.com>
---
.../arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
index 64b1c54f87c0..e63ff271be4e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -408,6 +408,18 @@ &uart0 {
status = "okay";
};
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8723cs-bt";
+ device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+ host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ };
+};
+
&usb_otg {
dr_mode = "host";
};
--
2.27.0
