We get warning with W=1 build: drivers/phy/samsung/phy-exynos5-usbdrd.c:211: warning: Function parameter or member 'phys' not described in 'exynos5_usbdrd_phy' drivers/phy/samsung/phy-exynos5-usbdrd.c:211: warning: Function parameter or member 'vbus' not described in 'exynos5_usbdrd_phy' drivers/phy/samsung/phy-exynos5-usbdrd.c:211: warning: Function parameter or member 'vbus_boost' not described in 'exynos5_usbdrd_phy'
These members are provided with description but format is not quite right resulting in above warnings Cc: Marek Szyprowski <[email protected]> Signed-off-by: Vinod Koul <[email protected]> --- drivers/phy/samsung/phy-exynos5-usbdrd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c index eb06ce9f748f..bfb0e8914103 100644 --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c @@ -180,14 +180,14 @@ struct exynos5_usbdrd_phy_drvdata { * @utmiclk: clock for utmi+ phy * @itpclk: clock for ITP generation * @drv_data: pointer to SoC level driver data structure - * @phys[]: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY + * @phys: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY * instances each with its 'phy' and 'phy_cfg'. * @extrefclk: frequency select settings when using 'separate * reference clocks' for SS and HS operations * @ref_clk: reference clock to PHY block from which PHY's * operational clocks are derived - * vbus: VBUS regulator for phy - * vbus_boost: Boost regulator for VBUS present on few Exynos boards + * @vbus: VBUS regulator for phy + * @vbus_boost: Boost regulator for VBUS present on few Exynos boards */ struct exynos5_usbdrd_phy { struct device *dev; -- 2.26.2
