Now that commit 3794ade5b286cbd4551009dd341dbe9aeead2bc3 removed
incorrect dependency on CONFIG_IDE we can fix the driver to not
include <linux/ide.h>:

* add ATA_REG_{ERROR,LCYL,HCYL,STATUS}_OFFSET defines and use them
  instead of IDE_{ERROR,LCYL,HCYL,STATUS}_OFFSET from <linux/ide.h>

* remove no longer needed <linux/ide.h> include

* remove incorrect comment added by the last commit:
  - isd200.c is not the only user of struct hd_driveid besides IDE
    (see drivers/block/xsysace.c and arch/um/drivers/ubd_kern.c)

Cc: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
---
 drivers/usb/storage/isd200.c |   29 ++++++++++++++---------------
 1 file changed, 14 insertions(+), 15 deletions(-)

Index: b/drivers/usb/storage/isd200.c
===================================================================
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -48,7 +48,6 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/hdreg.h>
-#include <linux/ide.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
@@ -109,6 +108,12 @@
 #define REG_STATUS             0x80
 #define REG_COMMAND            0x80
 
+/* ATA registers offset definitions */
+#define ATA_REG_ERROR_OFFSET           1
+#define ATA_REG_LCYL_OFFSET            4
+#define ATA_REG_HCYL_OFFSET            5
+#define ATA_REG_STATUS_OFFSET          7
+
 /* ATA error definitions not in <linux/hdreg.h> */
 #define ATA_ERROR_MEDIA_CHANGE         0x20
 
@@ -358,7 +363,7 @@ static void isd200_build_sense(struct us
 {
        struct isd200_info *info = (struct isd200_info *)us->extra;
        struct sense_data *buf = (struct sense_data *) &srb->sense_buffer[0];
-       unsigned char error = info->ATARegs[IDE_ERROR_OFFSET];
+       unsigned char error = info->ATARegs[ATA_REG_ERROR_OFFSET];
 
        if(error & ATA_ERROR_MEDIA_CHANGE) {
                buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID;
@@ -525,8 +530,8 @@ static int isd200_read_regs( struct us_d
                retStatus = ISD200_ERROR;
        } else {
                memcpy(info->ATARegs, info->RegsBuf, sizeof(info->ATARegs));
-               US_DEBUGP("   Got ATA Register[IDE_ERROR_OFFSET] = 0x%x\n", 
-                         info->ATARegs[IDE_ERROR_OFFSET]);
+               US_DEBUGP("   Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n",
+                         info->ATARegs[ATA_REG_ERROR_OFFSET]);
        }
 
        return retStatus;
@@ -868,7 +873,7 @@ static int isd200_try_enum(struct us_dat
                        break;
 
                if (!detect) {
-                       if (regs[IDE_STATUS_OFFSET] & BUSY_STAT ) {
+                       if (regs[ATA_REG_STATUS_OFFSET] & BUSY_STAT) {
                                US_DEBUGP("   %s status is still BSY, try 
again...\n",mstr);
                        } else {
                                US_DEBUGP("   %s status !BSY, continue with 
next operation\n",mstr);
@@ -878,12 +883,12 @@ static int isd200_try_enum(struct us_dat
                /* check for BUSY_STAT and */
                /* WRERR_STAT (workaround ATA Zip drive) and */ 
                /* ERR_STAT (workaround for Archos CD-ROM) */
-               else if (regs[IDE_STATUS_OFFSET] & 
+               else if (regs[ATA_REG_STATUS_OFFSET] &
                         (BUSY_STAT | WRERR_STAT | ERR_STAT )) {
                        US_DEBUGP("   Status indicates it is not ready, try 
again...\n");
                }
                /* check for DRDY, ATA devices set DRDY after SRST */
-               else if (regs[IDE_STATUS_OFFSET] & READY_STAT) {
+               else if (regs[ATA_REG_STATUS_OFFSET] & READY_STAT) {
                        US_DEBUGP("   Identified ATA device\n");
                        info->DeviceFlags |= DF_ATA_DEVICE;
                        info->DeviceHead = master_slave;
@@ -892,8 +897,8 @@ static int isd200_try_enum(struct us_dat
                /* check Cylinder High/Low to
                   determine if it is an ATAPI device
                */
-               else if ((regs[IDE_HCYL_OFFSET] == 0xEB) &&
-                        (regs[IDE_LCYL_OFFSET] == 0x14)) {
+               else if (regs[ATA_REG_HCYL_OFFSET] == 0xEB &&
+                        regs[ATA_REG_LCYL_OFFSET] == 0x14) {
                        /* It seems that the RICOH 
                           MP6200A CD/RW drive will 
                           report itself okay as a
@@ -977,12 +982,6 @@ static int isd200_manual_enum(struct us_
        return(retStatus);
 }
 
-/*
- *     We are the last non IDE user of the legacy IDE ident structures
- *     and we thus want to keep a private copy of this function so the
- *     driver can be used without the obsolete drivers/ide layer
- */
-
 static void isd200_fix_driveid (struct hd_driveid *id)
 {
 #ifndef __LITTLE_ENDIAN
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to