On Mon, Jul 20, 2020 at 02:16:45PM +0800, chenxiang (M) wrote:
> Hi Vaibhav,
> 
> 在 2020/7/17 14:34, Vaibhav Gupta 写道:
> > With legacy PM, drivers themselves were responsible for managing the
> > device's power states and takes care of register states.
> > 
> > After upgrading to the generic structure, PCI core will take care of
> > required tasks and drivers should do only device-specific operations.
> > 
> > The driver was calling pci_save/restore_state(), pci_choose_state(),
> > pci_enable/disable_device() and pci_set_power_state() which is no more
> > needed.
> > 
> > Compile-tested only.
> > 
> > Signed-off-by: Vaibhav Gupta <[email protected]>
> 
> Reviewed-by: Xiang Chen <[email protected]>
> Just a small comment, below.
> 
> > ---
> >   drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 32 ++++++++------------------
> >   1 file changed, 10 insertions(+), 22 deletions(-)
> > 
> > diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c 
> > b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
> > index 55e2321a65bc..45605a520bc8 100644
> > --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
> > +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
> > @@ -3374,13 +3374,13 @@ enum {
> >     hip08,
> >   };
> > -static int hisi_sas_v3_suspend(struct pci_dev *pdev, pm_message_t state)
> > +static int __maybe_unused hisi_sas_v3_suspend(struct device *dev_d)
> >   {
> > +   struct pci_dev *pdev = to_pci_dev(dev_d);
> >     struct sas_ha_struct *sha = pci_get_drvdata(pdev);
> >     struct hisi_hba *hisi_hba = sha->lldd_ha;
> >     struct device *dev = hisi_hba->dev;
> >     struct Scsi_Host *shost = hisi_hba->shost;
> > -   pci_power_t device_state;
> >     int rc;
> >     if (!pdev->pm_cap) {
> > @@ -3406,21 +3406,15 @@ static int hisi_sas_v3_suspend(struct pci_dev 
> > *pdev, pm_message_t state)
> >     hisi_sas_init_mem(hisi_hba);
> > -   device_state = pci_choose_state(pdev, state);
> > -   dev_warn(dev, "entering operating state [D%d]\n",
> > -                   device_state);
> 
> Please retain above print to keep consistence with the print in function
> hisi_sas_v3_resume().
>
Okay, Thanks for the review :)
This is will be fixed in v2 patch-series along with other changes.

-- Vaibhav Gupta 
> > -   pci_save_state(pdev);
> > -   pci_disable_device(pdev);
> > -   pci_set_power_state(pdev, device_state);
> > -
> >     hisi_sas_release_tasks(hisi_hba);
> >     sas_suspend_ha(sha);
> >     return 0;
> >   }
> > -static int hisi_sas_v3_resume(struct pci_dev *pdev)
> > +static int __maybe_unused hisi_sas_v3_resume(struct device *dev_d)
> >   {
> > +   struct pci_dev *pdev = to_pci_dev(dev_d);
> >     struct sas_ha_struct *sha = pci_get_drvdata(pdev);
> >     struct hisi_hba *hisi_hba = sha->lldd_ha;
> >     struct Scsi_Host *shost = hisi_hba->shost;
> > @@ -3430,16 +3424,8 @@ static int hisi_sas_v3_resume(struct pci_dev *pdev)
> >     dev_warn(dev, "resuming from operating state [D%d]\n",
> >              device_state);
> > -   pci_set_power_state(pdev, PCI_D0);
> > -   pci_enable_wake(pdev, PCI_D0, 0);
> > -   pci_restore_state(pdev);
> > -   rc = pci_enable_device(pdev);
> > -   if (rc) {
> > -           dev_err(dev, "enable device failed during resume (%d)\n", rc);
> > -           return rc;
> > -   }
> > +   device_wakeup_disable(dev_d);
> > -   pci_set_master(pdev);
> >     scsi_unblock_requests(shost);
> >     clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
> > @@ -3447,7 +3433,6 @@ static int hisi_sas_v3_resume(struct pci_dev *pdev)
> >     rc = hw_init_v3_hw(hisi_hba);
> >     if (rc) {
> >             scsi_remove_host(shost);
> > -           pci_disable_device(pdev);
> >             return rc;
> >     }
> >     hisi_hba->hw->phys_init(hisi_hba);
> > @@ -3468,13 +3453,16 @@ static const struct pci_error_handlers 
> > hisi_sas_err_handler = {
> >     .reset_done     = hisi_sas_reset_done_v3_hw,
> >   };
> > +static SIMPLE_DEV_PM_OPS(hisi_sas_v3_pm_ops,
> > +                    hisi_sas_v3_suspend,
> > +                    hisi_sas_v3_resume);
> > +
> >   static struct pci_driver sas_v3_pci_driver = {
> >     .name           = DRV_NAME,
> >     .id_table       = sas_v3_pci_table,
> >     .probe          = hisi_sas_v3_probe,
> >     .remove         = hisi_sas_v3_remove,
> > -   .suspend        = hisi_sas_v3_suspend,
> > -   .resume         = hisi_sas_v3_resume,
> > +   .driver.pm      = &hisi_sas_v3_pm_ops,
> >     .err_handler    = &hisi_sas_err_handler,
> >   };
> 
> 

Reply via email to