Add the reg property to each channel node. This update is to accommodate the multicolor framework. In addition to the accommodation this allows the LEDs to be placed on any channel and allow designs to skip channels as opposed to requiring sequential order.
Acked-by: Pavel Machek <[email protected]> Signed-off-by: Dan Murphy <[email protected]> CC: Shawn Guo <[email protected]> CC: Sascha Hauer <[email protected]> CC: Pengutronix Kernel Team <[email protected]> CC: Fabio Estevam <[email protected]> CC: NXP Linux Team <[email protected]> --- arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index 2b9423d55c37..77aa90640052 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -258,29 +258,35 @@ leds: led-controller@30 { reg = <0x30>; clock-mode = /bits/ 8 <1>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; - chan0 { + chan@0 { chan-name = "R"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; + reg = <0>; }; - chan1 { + chan@1 { chan-name = "G"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; + reg = <1>; }; - chan2 { + chan@2 { chan-name = "B"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; + reg = <2>; }; - chan3 { + chan@3 { chan-name = "W"; led-cur = /bits/ 8 <0x0>; max-cur = /bits/ 8 <0x0>; + reg = <3>; }; }; -- 2.27.0
