Configure the SAI device node, configure audio clock and pinctrl. Enable the audio sound card, which use the SAI1 and wm8960, and enable headphone detection.
Signed-off-by: Shengjiu Wang <[email protected]> --- arch/arm/boot/dts/imx7d-sdb.dts | 81 +++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+) diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 17cca8a9f77b..b50b19f2d0f1 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -146,6 +146,24 @@ panel_in: endpoint { }; }; }; + + sound { + compatible = "fsl,imx7d-evk-wm8960", + "fsl,imx-audio-wm8960"; + model = "wm8960-audio"; + audio-cpu = <&sai1>; + audio-codec = <&codec>; + hp-det-gpio = <&gpio2 28 GPIO_ACTIVE_HIGH>; + audio-routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "AMIC", + "AMIC", "MICB"; + }; }; &adc1 { @@ -363,6 +381,13 @@ codec: wm8960@1a { clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; clock-names = "mclk"; wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>, + <&clks IMX7D_PLL_AUDIO_POST_DIV>, + <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <884736000>, <12288000>; }; }; @@ -391,6 +416,28 @@ ®_1p2 { vin-supply = <&sw2_reg>; }; +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_PLL_AUDIO_POST_DIV>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <884736000>, <36864000>; + status = "okay"; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3 &pinctrl_sai3_mclk>; + assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>, + <&clks IMX7D_PLL_AUDIO_POST_DIV>, + <&clks IMX7D_SAI3_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <884736000>, <36864000>; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -550,6 +597,7 @@ MX7D_PAD_SD2_WP__GPIO5_IO10 0x59 pinctrl_hog: hoggrp { fsl,pins = < MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x59 /* headphone detect */ >; }; @@ -615,6 +663,33 @@ MX7D_PAD_LCD_RESET__LCD_RESET 0x79 >; }; + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x1f + MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x1f + MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x30 + MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x1f + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x1f + MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x1f + MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x30 + >; + }; + pinctrl_spi4: spi4grp { fsl,pins = < MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59 @@ -776,4 +851,10 @@ pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp { MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 >; }; + + pinctrl_sai3_mclk: sai3grp_mclk { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK 0x1f + >; + }; }; -- 2.27.0
