Hi Rajendra, After applying 2,3 and 4/5 patches on linaro-integration v5.8-rc2 I see below messages on db845:
qcom-venus aa00000.video-codec: dev_pm_opp_set_rate: failed to find current OPP for freq 533000097 (-34) ^^^ This one is new. qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x30000 ^^^ and this message is annoying, can we make it pr_debug in rpmh? On 7/23/20 2:26 PM, Rajendra Nayak wrote: > Add the OPP tables in order to be able to vote on the performance state of > a power-domain. > > Signed-off-by: Rajendra Nayak <[email protected]> > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 40 > ++++++++++++++++++++++++++++++++++-- > 1 file changed, 38 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi > b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index e506793..5ca2265 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -3631,8 +3631,10 @@ > interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; > power-domains = <&videocc VENUS_GDSC>, > <&videocc VCODEC0_GDSC>, > - <&videocc VCODEC1_GDSC>; > - power-domain-names = "venus", "vcodec0", "vcodec1"; > + <&videocc VCODEC1_GDSC>, > + <&rpmhpd SDM845_CX>; > + power-domain-names = "venus", "vcodec0", "vcodec1", > "cx"; > + operating-points-v2 = <&venus_opp_table>; > clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, > <&videocc VIDEO_CC_VENUS_AHB_CLK>, > <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, > @@ -3654,6 +3656,40 @@ > video-core1 { > compatible = "venus-encoder"; > }; > + > + venus_opp_table: venus-opp-table { > + compatible = "operating-points-v2"; > + > + opp-100000000 { > + opp-hz = /bits/ 64 <100000000>; > + required-opps = <&rpmhpd_opp_min_svs>; > + }; > + > + opp-200000000 { > + opp-hz = /bits/ 64 <200000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-320000000 { > + opp-hz = /bits/ 64 <320000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-380000000 { > + opp-hz = /bits/ 64 <380000000>; > + required-opps = <&rpmhpd_opp_svs_l1>; > + }; > + > + opp-444000000 { > + opp-hz = /bits/ 64 <444000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + > + opp-533000000 { > + opp-hz = /bits/ 64 <533000000>; > + required-opps = <&rpmhpd_opp_turbo>; > + }; > + }; > }; > > videocc: clock-controller@ab00000 { > -- regards, Stan
