Add the necessary pinctrl and interrupts to make UART
wakeup capable.

Signed-off-by: satya priya <ska...@codeaurora.org>
---
Changes in V2:
 - As per Matthias's comment added wakeup support for all the UARTs
   of SC7180.

 arch/arm64/boot/dts/qcom/sc7180.dtsi | 98 ++++++++++++++++++++++++++++++------
 1 file changed, 84 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi 
b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 16df08d..044a4d0 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -787,9 +787,11 @@
                                reg = <0 0x00880000 0 0x4000>;
                                clock-names = "se";
                                clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
-                               pinctrl-names = "default";
+                               pinctrl-names = "default", "sleep";
                                pinctrl-0 = <&qup_uart0_default>;
-                               interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-1 = <&qup_uart0_sleep>;
+                               interrupts-extended = <&intc GIC_SPI 601 
IRQ_TYPE_LEVEL_HIGH>,
+                                                       <&tlmm 37 
IRQ_TYPE_EDGE_FALLING>;
                                power-domains = <&rpmhpd SC7180_CX>;
                                operating-points-v2 = <&qup_opp_table>;
                                interconnects = <&qup_virt MASTER_QUP_CORE_0 
&qup_virt SLAVE_QUP_CORE_0>,
@@ -839,9 +841,11 @@
                                reg = <0 0x00884000 0 0x4000>;
                                clock-names = "se";
                                clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
-                               pinctrl-names = "default";
+                               pinctrl-names = "default", "sleep";
                                pinctrl-0 = <&qup_uart1_default>;
-                               interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-1 = <&qup_uart1_sleep>;
+                               interrupts-extended = <&intc GIC_SPI 602 
IRQ_TYPE_LEVEL_HIGH>,
+                                                       <&tlmm 3 
IRQ_TYPE_EDGE_FALLING>;
                                power-domains = <&rpmhpd SC7180_CX>;
                                operating-points-v2 = <&qup_opp_table>;
                                interconnects = <&qup_virt MASTER_QUP_CORE_0 
&qup_virt SLAVE_QUP_CORE_0>,
@@ -925,9 +929,11 @@
                                reg = <0 0x0088c000 0 0x4000>;
                                clock-names = "se";
                                clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
-                               pinctrl-names = "default";
+                               pinctrl-names = "default", "sleep";
                                pinctrl-0 = <&qup_uart3_default>;
-                               interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-1 = <&qup_uart3_sleep>;
+                               interrupts-extended = <&intc GIC_SPI 604 
IRQ_TYPE_LEVEL_HIGH>,
+                                                       <&tlmm 41 
IRQ_TYPE_EDGE_FALLING>;
                                power-domains = <&rpmhpd SC7180_CX>;
                                operating-points-v2 = <&qup_opp_table>;
                                interconnects = <&qup_virt MASTER_QUP_CORE_0 
&qup_virt SLAVE_QUP_CORE_0>,
@@ -1011,9 +1017,11 @@
                                reg = <0 0x00894000 0 0x4000>;
                                clock-names = "se";
                                clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
-                               pinctrl-names = "default";
+                               pinctrl-names = "default", "sleep";
                                pinctrl-0 = <&qup_uart5_default>;
-                               interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-1 = <&qup_uart5_sleep>;
+                               interrupts-extended = <&intc GIC_SPI 606 
IRQ_TYPE_LEVEL_HIGH>,
+                                                       <&tlmm 28 
IRQ_TYPE_EDGE_FALLING>;
                                power-domains = <&rpmhpd SC7180_CX>;
                                operating-points-v2 = <&qup_opp_table>;
                                interconnects = <&qup_virt MASTER_QUP_CORE_0 
&qup_virt SLAVE_QUP_CORE_0>,
@@ -1078,9 +1086,11 @@
                                reg = <0 0x00a80000 0 0x4000>;
                                clock-names = "se";
                                clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
-                               pinctrl-names = "default";
+                               pinctrl-names = "default", "sleep";
                                pinctrl-0 = <&qup_uart6_default>;
-                               interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-1 = <&qup_uart6_sleep>;
+                               interrupts-extended = <&intc GIC_SPI 353 
IRQ_TYPE_LEVEL_HIGH>,
+                                                       <&tlmm 62 
IRQ_TYPE_EDGE_FALLING>;
                                power-domains = <&rpmhpd SC7180_CX>;
                                operating-points-v2 = <&qup_opp_table>;
                                interconnects = <&qup_virt MASTER_QUP_CORE_1 
&qup_virt SLAVE_QUP_CORE_1>,
@@ -1250,9 +1260,11 @@
                                reg = <0 0x00a90000 0 0x4000>;
                                clock-names = "se";
                                clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
-                               pinctrl-names = "default";
+                               pinctrl-names = "default", "sleep";
                                pinctrl-0 = <&qup_uart10_default>;
-                               interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-1 = <&qup_uart10_sleep>;
+                               interrupts-extended = <&intc GIC_SPI 357 
IRQ_TYPE_LEVEL_HIGH>,
+                                                       <&tlmm 89 
IRQ_TYPE_EDGE_FALLING>;
                                power-domains = <&rpmhpd SC7180_CX>;
                                operating-points-v2 = <&qup_opp_table>;
                                interconnects = <&qup_virt MASTER_QUP_CORE_1 
&qup_virt SLAVE_QUP_CORE_1>,
@@ -1302,9 +1314,11 @@
                                reg = <0 0x00a94000 0 0x4000>;
                                clock-names = "se";
                                clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
-                               pinctrl-names = "default";
+                               pinctrl-names = "default", "sleep";
                                pinctrl-0 = <&qup_uart11_default>;
-                               interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+                               pinctrl-1 = <&qup_uart11_sleep>;
+                               interrupts-extended = <&intc GIC_SPI 358 
IRQ_TYPE_LEVEL_HIGH>,
+                                                       <&tlmm 56 
IRQ_TYPE_EDGE_FALLING>;
                                power-domains = <&rpmhpd SC7180_CX>;
                                operating-points-v2 = <&qup_opp_table>;
                                interconnects = <&qup_virt MASTER_QUP_CORE_1 
&qup_virt SLAVE_QUP_CORE_1>,
@@ -1632,6 +1646,14 @@
                                };
                        };
 
+                       qup_uart0_sleep: qup-uart0-sleep {
+                               pinmux {
+                                       pins = "gpio34", "gpio35",
+                                              "gpio36", "gpio37";
+                                       function = "gpio";
+                               };
+                       };
+
                        qup_uart1_default: qup-uart1-default {
                                pinmux {
                                        pins = "gpio0", "gpio1",
@@ -1640,6 +1662,14 @@
                                };
                        };
 
+                       qup_uart1_sleep: qup-uart1-sleep {
+                               pinmux {
+                                       pins = "gpio0", "gpio1",
+                                              "gpio2", "gpio3";
+                                       function = "gpio";
+                               };
+                       };
+
                        qup_uart2_default: qup-uart2-default {
                                pinmux {
                                        pins = "gpio15", "gpio16";
@@ -1655,6 +1685,14 @@
                                };
                        };
 
+                       qup_uart3_sleep: qup-uart3-sleep {
+                               pinmux {
+                                       pins = "gpio38", "gpio39",
+                                              "gpio40", "gpio41";
+                                       function = "gpio";
+                               };
+                       };
+
                        qup_uart4_default: qup-uart4-default {
                                pinmux {
                                        pins = "gpio115", "gpio116";
@@ -1670,6 +1708,14 @@
                                };
                        };
 
+                       qup_uart5_sleep: qup-uart5-sleep {
+                               pinmux {
+                                       pins = "gpio25", "gpio26",
+                                              "gpio27", "gpio28";
+                                       function = "gpio";
+                               };
+                       };
+
                        qup_uart6_default: qup-uart6-default {
                                pinmux {
                                        pins = "gpio59", "gpio60",
@@ -1678,6 +1724,14 @@
                                };
                        };
 
+                       qup_uart6_sleep: qup-uart6-sleep {
+                               pinmux {
+                                       pins = "gpio59", "gpio60",
+                                              "gpio61", "gpio62";
+                                       function = "gpio";
+                               };
+                       };
+
                        qup_uart7_default: qup-uart7-default {
                                pinmux {
                                        pins = "gpio6", "gpio7";
@@ -1707,6 +1761,14 @@
                                };
                        };
 
+                       qup_uart10_sleep: qup-uart10-sleep {
+                               pinmux {
+                                       pins = "gpio86", "gpio87",
+                                              "gpio88", "gpio89";
+                                       function = "gpio";
+                               };
+                       };
+
                        qup_uart11_default: qup-uart11-default {
                                pinmux {
                                        pins = "gpio53", "gpio54",
@@ -1715,6 +1777,14 @@
                                };
                        };
 
+                       qup_uart11_sleep: qup-uart11-sleep {
+                               pinmux {
+                                       pins = "gpio53", "gpio54",
+                                              "gpio55", "gpio56";
+                                       function = "gpio";
+                               };
+                       };
+
                        sdc1_on: sdc1-on {
                                pinconf-clk {
                                        pins = "sdc1_clk";
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation

Reply via email to