Rob,
sorry for late reply, I have my head in setup production install the dt-schema
and rerun the check, with 2020-6 no warnings lets fix it.
Chris
On 13/7/2020 11:00 pm, Rob Herring wrote:
On Sun, 12 Jul 2020 12:44:10 +0800, Chris Ruehl wrote:
Add documentation for the newly added DTS support in the shtc1 driver.
To align with the drivers logic to have high precision by default
a boolean sensirion,low_precision is used to switch to low precision.
Signed-off-by: Chris Ruehl <[email protected]>
---
.../bindings/hwmon/sensirion,shtc1.yaml | 57 +++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
My bot found errors running 'make dt_binding_check' on your patch:
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts:24.13-26:
Warning (reg_format): /example-0/i2c1/shtc3@70:reg: property has invalid length
(4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml:
Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml:
Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml:
Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml:
Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml:
Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts:22.20-26.13:
Warning (avoid_default_addr_size): /example-0/i2c1/shtc3@70: Relying on
default #address-cells value
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts:22.20-26.13:
Warning (avoid_default_addr_size): /example-0/i2c1/shtc3@70: Relying on
default #size-cells value
Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml:
Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
See https://patchwork.ozlabs.org/patch/1327453
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master
--upgrade
Please check and re-submit.
--
GTSYS Limited RFID Technology
9/F, Unit E, R07, Kwai Shing Industrial Building Phase 2,
42-46 Tai Lin Pai Road, Kwai Chung, N.T., Hong Kong
Tel (852) 9079 9521
Disclaimer: https://www.gtsys.com.hk/email/classified.html
