Drop the repeated words {start, it, the} in comments.

Signed-off-by: Randy Dunlap <rdun...@infradead.org>
Cc: Liam Girdwood <lgirdw...@gmail.com>
Cc: Mark Brown <broo...@kernel.org>
Cc: alsa-de...@alsa-project.org
---
 sound/soc/codecs/nau8825.c |    2 +-
 sound/soc/codecs/tas5086.c |    2 +-
 sound/soc/codecs/wm9713.c  |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

--- linux-next-20200807.orig/sound/soc/codecs/nau8825.c
+++ linux-next-20200807/sound/soc/codecs/nau8825.c
@@ -251,7 +251,7 @@ static const unsigned short logtable[256
  *
  * Acquires the semaphore without jiffies. Try to acquire the semaphore
  * atomically. Returns 0 if the semaphore has been acquired successfully
- * or 1 if it it cannot be acquired.
+ * or 1 if it cannot be acquired.
  */
 static int nau8825_sema_acquire(struct nau8825 *nau8825, long timeout)
 {
--- linux-next-20200807.orig/sound/soc/codecs/tas5086.c
+++ linux-next-20200807/sound/soc/codecs/tas5086.c
@@ -487,7 +487,7 @@ static int tas5086_init(struct device *d
        /*
         * If any of the channels is configured to start in Mid-Z mode,
         * configure 'part 1' of the PWM starts to use Mid-Z, and tell
-        * all configured mid-z channels to start start under 'part 1'.
+        * all configured mid-z channels to start under 'part 1'.
         */
        if (priv->pwm_start_mid_z)
                regmap_write(priv->regmap, TAS5086_PWM_START,
--- linux-next-20200807.orig/sound/soc/codecs/wm9713.c
+++ linux-next-20200807/sound/soc/codecs/wm9713.c
@@ -755,7 +755,7 @@ static void pll_factors(struct snd_soc_c
        u64 Kpart;
        unsigned int K, Ndiv, Nmod, target;
 
-       /* The the PLL output is always 98.304MHz. */
+       /* The PLL output is always 98.304MHz. */
        target = 98304000;
 
        /* If the input frequency is over 14.4MHz then scale it down. */

Reply via email to