Hi Rob, Thanks a lot for your comments!
> -----Original Message----- > From: Rob Herring [mailto:[email protected]] > Sent: 2020年8月14日 23:51 > To: Z.q. Hou <[email protected]> > Cc: [email protected]; PCI <[email protected]>; Lorenzo > Pieralisi <[email protected]>; Bjorn Helgaas > <[email protected]>; Andrew Murray <[email protected]>; > Jingoo Han <[email protected]>; Gustavo Pimentel > <[email protected]> > Subject: Re: [PATCH] PCI: designware-ep: Fix the Header Type check > > On Fri, Aug 14, 2020 at 2:15 AM Zhiqiang Hou <[email protected]> > wrote: > > > > From: Hou Zhiqiang <[email protected]> > > > > The current check will result in the multiple function device fails to > > initialize. So fix the check by masking out the multiple function bit. > > > > Fixes: 0b24134f7888 ("PCI: dwc: Add validation that PCIe core is set > > to correct mode") > > Signed-off-by: Hou Zhiqiang <[email protected]> > > --- > > drivers/pci/controller/dwc/pcie-designware-ep.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c > > b/drivers/pci/controller/dwc/pcie-designware-ep.c > > index 4680a51c49c0..4b7abfb1e669 100644 > > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c > > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c > > @@ -654,7 +654,7 @@ int dw_pcie_ep_init_complete(struct dw_pcie_ep > *ep) > > int i; > > > > hdr_type = dw_pcie_readb_dbi(pci, PCI_HEADER_TYPE); > > - if (hdr_type != PCI_HEADER_TYPE_NORMAL) { > > + if (hdr_type & 0x7f != PCI_HEADER_TYPE_NORMAL) { > > Should have () around 'hdr_type & 0x7f'. > > > dev_err(pci->dev, > > "PCIe controller is not set to EP mode > (hdr_type:0x%x)!\n", > > hdr_type); > > However, shouldn't the printed value be masked too? I'd just do: > > hdr_type = dw_pcie_readb_dbi(pci, PCI_HEADER_TYPE) & 0x7f; > > Perhaps add a #define too. '0x7f' is used in several places. All these are good suggestions, will make it in next version. Thanks, Zhiqiang > > Rob
