On Tue, 18 Aug 2020 18:42:41 +0100, Cristian Ciocaltea <[email protected]> wrote: > > Hi Marc, > > Thanks for your quick and detailed review! > > On Mon, Aug 17, 2020 at 02:52:06PM +0100, Marc Zyngier wrote: > > On 2020-08-16 12:33, Cristian Ciocaltea wrote: > > > This controller appears on Actions Semi Owl family SoC's S500, S700 and > > > S900 and provides support for 3 external interrupt controllers through > > > > Is that really 3 interrupt controllers? Or merely 3 interrupt lines? > > This is mostly a leftover statement from the previous patch revision. > I will change it to something like: > > "This interrupt controller is found in the Actions Semi Owl SoCs (S500, > S700 and S900) and provides support for handling up to 3 external > interrupt lines."
Looks good. > > > > dedicated SIRQ pins. > > > > > > Each line can be independently configured as interrupt and triggers > > > on either of the edges (raising or falling) or either of the levels > > > (high or low). Each line can also be masked independently. > > > > > > This is based on the patch series submitted by Parthiban Nallathambi: > > > https://lore.kernel.org/lkml/[email protected]/ > > > > > > Signed-off-by: Parthiban Nallathambi <[email protected]> > > > Signed-off-by: Saravanan Sekar <[email protected]> > > > [cristi: optimized DT, various fixes/cleanups/improvements] > > > Signed-off-by: Cristian Ciocaltea <[email protected]> > > > --- > > > drivers/irqchip/Makefile | 1 + > > > drivers/irqchip/irq-owl-sirq.c | 318 +++++++++++++++++++++++++++++++++ > > > 2 files changed, 319 insertions(+) > > > create mode 100644 drivers/irqchip/irq-owl-sirq.c > > > > > > diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile > > > index 133f9c45744a..b8eb5b8b766d 100644 > > > --- a/drivers/irqchip/Makefile > > > +++ b/drivers/irqchip/Makefile > > > @@ -7,6 +7,7 @@ obj-$(CONFIG_ATH79) += > > > irq-ath79-cpu.o > > > obj-$(CONFIG_ATH79) += irq-ath79-misc.o > > > obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o > > > obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2836.o > > > +obj-$(CONFIG_ARCH_ACTIONS) += irq-owl-sirq.o > > > obj-$(CONFIG_DAVINCI_AINTC) += irq-davinci-aintc.o > > > obj-$(CONFIG_DAVINCI_CP_INTC) += irq-davinci-cp-intc.o > > > obj-$(CONFIG_EXYNOS_IRQ_COMBINER) += exynos-combiner.o > > > diff --git a/drivers/irqchip/irq-owl-sirq.c > > > b/drivers/irqchip/irq-owl-sirq.c > > > new file mode 100644 > > > index 000000000000..29b7ffc40ac7 > > > --- /dev/null > > > +++ b/drivers/irqchip/irq-owl-sirq.c > > > @@ -0,0 +1,318 @@ > > > +// SPDX-License-Identifier: GPL-2.0+ > > > +/* > > > + * Actions Semi Owl SoCs SIRQ interrupt controller driver > > > + * > > > + * Copyright (C) 2014 Actions Semi Inc. > > > + * David Liu <[email protected]> > > > + * > > > + * Author: Parthiban Nallathambi <[email protected]> > > > + * Author: Saravanan Sekar <[email protected]> > > > + * Author: Cristian Ciocaltea <[email protected]> > > > + */ > > > + > > > +#include <linux/interrupt.h> > > > +#include <linux/irqchip.h> > > > +#include <linux/of_address.h> > > > +#include <linux/of_irq.h> > > > + > > > +#define NUM_SIRQ 3 > > > + > > > +#define INTC_EXTCTL_PENDING BIT(0) > > > +#define INTC_EXTCTL_CLK_SEL BIT(4) > > > +#define INTC_EXTCTL_EN BIT(5) > > > +#define INTC_EXTCTL_TYPE_MASK GENMASK(7, 6) > > > +#define INTC_EXTCTL_TYPE_HIGH 0 > > > +#define INTC_EXTCTL_TYPE_LOW BIT(6) > > > +#define INTC_EXTCTL_TYPE_RISING BIT(7) > > > +#define INTC_EXTCTL_TYPE_FALLING (BIT(6) | BIT(7)) > > > + > > > +/* S900 SIRQ1 & SIRQ2 control register offsets, relative to SIRQ0 */ > > > +#define INTC_EXTCTL1 0x0328 > > > +#define INTC_EXTCTL2 0x032c > > > + > > > +struct owl_sirq_params { > > > + /* INTC_EXTCTL reg shared for all three SIRQ lines */ > > > + bool reg_shared; > > > + /* INTC_EXTCTL reg offsets relative to controller base address */ > > > + u16 reg_offset[NUM_SIRQ]; > > > +}; > > > + > > > +struct owl_sirq_chip_data { > > > + const struct owl_sirq_params *params; > > > + void __iomem *base; > > > + raw_spinlock_t lock; > > > + u32 ext_irqs[NUM_SIRQ]; > > > + u8 trigger; > > > > Nit: Please align data structure members vertically: > > > > struct owl_sirq_chip_data { > > const struct owl_sirq_params *params; > > void __iomem *base; > > raw_spinlock_t lock; > > u32 ext_irqs[NUM_SIRQ]; > > u8 trigger; > > }; > > Done. > > > > +}; > > > + > > > +/* S500 and S700 SoCs */ > > > +static const struct owl_sirq_params owl_sirq_s500_params = { > > > + .reg_shared = true, > > > + .reg_offset = { 0, 0, 0 }, > > > +}; > > > + > > > +/* S900 SoC */ > > > +static const struct owl_sirq_params owl_sirq_s900_params = { > > > + .reg_shared = false, > > > + .reg_offset = { 0, INTC_EXTCTL1, INTC_EXTCTL2 }, > > > > 0 *is* an offset, right? Why doesn't it have a name too? > > Right, I updated the defines section: > > /* S900 SIRQ control register offsets, relative to controller base address */ > #define INTC_EXTCTL0 0x0000 > #define INTC_EXTCTL1 0x0328 > [...] > > The controller base address points to SIRQ0 control register, so this > offset is always 0, but I totally agree we should have a name for it. > > > > +}; > > > + > > > +static u32 owl_sirq_read_extctl(struct owl_sirq_chip_data *data, u32 > > > index) > > > +{ > > > + u32 val; > > > + > > > + val = readl_relaxed(data->base + data->params->reg_offset[index]); > > > + if (data->params->reg_shared) > > > + val = (val >> (2 - index) * 8) & 0xff; > > > > base = (2 - index) * 8; > > val = FIELD_GET(GENMASK(base + 7, base), val); > > Unfortunately the context doesn't allow using FIELD_GET: > > ./include/linux/compiler.h:392:38: error: call to ‘__compiletime_assert_159’ > declared with attribute error: FIELD_GET: mask is not constant Bah. Turning the whole thing into compile-time values would actually be more readable, so how about this: diff --git a/drivers/irqchip/irq-owl-sirq.c b/drivers/irqchip/irq-owl-sirq.c index 29b7ffc40ac7..b771acbda7d5 100644 --- a/drivers/irqchip/irq-owl-sirq.c +++ b/drivers/irqchip/irq-owl-sirq.c @@ -57,13 +57,39 @@ static const struct owl_sirq_params owl_sirq_s900_params = { .reg_offset = { 0, INTC_EXTCTL1, INTC_EXTCTL2 }, }; +static u32 owl_field_get(u32 val, int index) +{ + switch(index) { + case 0: + return FIELD_GET(GENMASK(23, 16), val); + case 1: + return FIELD_GET(GENMASK(15, 8), val); + case 2: + default: + return FIELD_GET(GENMASK(7, 0), val); + } +} + +static u32 owl_field_prep(u32 val, int index) +{ + switch(index) { + case 0: + return FIELD_PREP(GENMASK(23, 16), val); + case 1: + return FIELD_PREP(GENMASK(15, 8), val); + case 2: + default: + return FIELD_PREP(GENMASK(7, 0), val); + } +} + static u32 owl_sirq_read_extctl(struct owl_sirq_chip_data *data, u32 index) { u32 val; val = readl_relaxed(data->base + data->params->reg_offset[index]); if (data->params->reg_shared) - val = (val >> (2 - index) * 8) & 0xff; + val = owl_field_get(val, index); return val; } @@ -75,9 +101,8 @@ static void owl_sirq_write_extctl(struct owl_sirq_chip_data *data, if (data->params->reg_shared) { val = readl_relaxed(data->base + data->params->reg_offset[index]); - val &= ~(0xff << (2 - index) * 8); - extctl &= 0xff; - extctl = (extctl << (2 - index) * 8) | val; + val &= ~owl_field_prep(0xff, index); + extctl = owl_field_prep(extctl, index) | val; } writel_relaxed(extctl, data->base + data->params->reg_offset[index]); Yes, this is a bit more code, but it *is* readable. Bonus points if you add proper defines for the masks. > > > > + > > > + return val; > > > +} > > > + > > > +static void owl_sirq_write_extctl(struct owl_sirq_chip_data *data, > > > + u32 extctl, u32 index) > > > +{ > > > + u32 val; > > > + > > > + if (data->params->reg_shared) { > > > + val = readl_relaxed(data->base + > > > data->params->reg_offset[index]); > > > + val &= ~(0xff << (2 - index) * 8); > > > + extctl &= 0xff; > > > + extctl = (extctl << (2 - index) * 8) | val; > > > > Please make use of FIELD_PREP, FIELD_GET and GENMASK. > > I'm not sure how to deal with the mask constness restriction, except > using static defines and if/else statements, which is not quite > elegant. See above. > > > > + } > > > + > > > + writel_relaxed(extctl, data->base + data->params->reg_offset[index]); > > > +} > > > + > > > +static void owl_sirq_clear_set_extctl(struct owl_sirq_chip_data *d, > > > + u32 clear, u32 set, u32 index) > > > +{ > > > + unsigned long flags; > > > + u32 val; > > > + > > > + raw_spin_lock_irqsave(&d->lock, flags); > > > + val = owl_sirq_read_extctl(d, index); > > > + val &= ~clear; > > > + val |= set; > > > + owl_sirq_write_extctl(d, val, index); > > > + raw_spin_unlock_irqrestore(&d->lock, flags); > > > +} > > > + > > > +static void owl_sirq_eoi(struct irq_data *data) > > > +{ > > > + struct owl_sirq_chip_data *chip_data = > > > irq_data_get_irq_chip_data(data); > > > + > > > + /* > > > + * Software must clear external interrupt pending, when interrupt type > > > + * is edge triggered, so we need per SIRQ based clearing. > > > + */ > > > + if (chip_data->trigger & (1 << data->hwirq)) > > > > BIT(d->hwirq) > > > > But it also begs the question: we already have all the trigger information > > in the irqdesc. Why do you need some additional bookkeeping? > > That's another leftover from the original work. Thanks for pointing > this out, I missed it. I dropped the redundant handling of the IRQ > trigger information and just replaced this with: > > if (!irqd_is_level_type(data)) Yup. > > > > + owl_sirq_clear_set_extctl(chip_data, 0, INTC_EXTCTL_PENDING, > > > + data->hwirq); > > > + > > > + irq_chip_eoi_parent(data); > > > +} > > > + > > > +static void owl_sirq_mask(struct irq_data *data) > > > +{ > > > + struct owl_sirq_chip_data *chip_data = > > > irq_data_get_irq_chip_data(data); > > > + > > > + owl_sirq_clear_set_extctl(chip_data, INTC_EXTCTL_EN, 0, data->hwirq); > > > + irq_chip_mask_parent(data); > > > +} > > > + > > > +static void owl_sirq_unmask(struct irq_data *data) > > > +{ > > > + struct owl_sirq_chip_data *chip_data = > > > irq_data_get_irq_chip_data(data); > > > + > > > + owl_sirq_clear_set_extctl(chip_data, 0, INTC_EXTCTL_EN, data->hwirq); > > > + irq_chip_unmask_parent(data); > > > +} > > > + > > > +/* > > > + * GIC does not handle falling edge or active low, hence SIRQ shall be > > > + * programmed to convert falling edge to rising edge signal and active > > > + * low to active high signal. > > > + */ > > > +static int owl_sirq_set_type(struct irq_data *data, unsigned int type) > > > +{ > > > + struct owl_sirq_chip_data *chip_data = > > > irq_data_get_irq_chip_data(data); > > > + u32 sirq_type; > > > + > > > + switch (type) { > > > + case IRQ_TYPE_LEVEL_LOW: > > > + sirq_type = INTC_EXTCTL_TYPE_LOW; > > > + chip_data->trigger &= ~(1 << data->hwirq); > > > + type = IRQ_TYPE_LEVEL_HIGH; > > > + break; > > > + case IRQ_TYPE_LEVEL_HIGH: > > > + sirq_type = INTC_EXTCTL_TYPE_HIGH; > > > + chip_data->trigger &= ~(1 << data->hwirq); > > > + break; > > > + case IRQ_TYPE_EDGE_FALLING: > > > + sirq_type = INTC_EXTCTL_TYPE_FALLING; > > > + chip_data->trigger |= 1 << data->hwirq; > > > + type = IRQ_TYPE_EDGE_RISING; > > > + break; > > > + case IRQ_TYPE_EDGE_RISING: > > > + sirq_type = INTC_EXTCTL_TYPE_RISING; > > > + chip_data->trigger |= 1 << data->hwirq; > > > + break; > > > + default: > > > + WARN_ON(1); > > > > No need for this WARN_ON(), the core kernel is loud enough. > > Done. > > > > + return -EINVAL; > > > + } > > > + > > > + owl_sirq_clear_set_extctl(chip_data, INTC_EXTCTL_TYPE_MASK, sirq_type, > > > + data->hwirq); > > > + > > > + return irq_chip_set_type_parent(data, type); > > > +} > > > + > > > +static struct irq_chip owl_sirq_chip = { > > > + .name = "owl-sirq", > > > + .irq_mask = owl_sirq_mask, > > > + .irq_unmask = owl_sirq_unmask, > > > + .irq_eoi = owl_sirq_eoi, > > > + .irq_set_type = owl_sirq_set_type, > > > + .irq_retrigger = irq_chip_retrigger_hierarchy, > > > > How about irq_set_affinity? Or does it only exist on UP systems? > > I have just added: > > #ifdef CONFIG_SMP > .irq_set_affinity = irq_chip_set_affinity_parent, > #endif Looks OK. Cheers, M. -- Without deviation from the norm, progress is not possible.
