On Sat, Aug 15, 2020 at 09:22:26AM +0800, Chris Ruehl wrote:
> Add support for DTS bindings for the sensirion shtc1,shtw1 and shtc3.
> 
> Signed-off-by: Chris Ruehl <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>

Applied.

Thanks,
Guenter

> ---
>  v8: no change
> 
>  drivers/hwmon/shtc1.c | 25 ++++++++++++++++++++++---
>  1 file changed, 22 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/hwmon/shtc1.c b/drivers/hwmon/shtc1.c
> index a0078ccede03..7993a5ff8768 100644
> --- a/drivers/hwmon/shtc1.c
> +++ b/drivers/hwmon/shtc1.c
> @@ -14,6 +14,7 @@
>  #include <linux/err.h>
>  #include <linux/delay.h>
>  #include <linux/platform_data/shtc1.h>
> +#include <linux/of.h>
>  
>  /* commands (high precision mode) */
>  static const unsigned char shtc1_cmd_measure_blocking_hpm[]    = { 0x7C, 
> 0xA2 };
> @@ -196,6 +197,7 @@ static int shtc1_probe(struct i2c_client *client,
>       enum shtcx_chips chip = id->driver_data;
>       struct i2c_adapter *adap = client->adapter;
>       struct device *dev = &client->dev;
> +     struct device_node *np = dev->of_node;
>  
>       if (!i2c_check_functionality(adap, I2C_FUNC_I2C)) {
>               dev_err(dev, "plain i2c transactions not supported\n");
> @@ -233,8 +235,14 @@ static int shtc1_probe(struct i2c_client *client,
>       data->client = client;
>       data->chip = chip;
>  
> -     if (client->dev.platform_data)
> -             data->setup = *(struct shtc1_platform_data *)dev->platform_data;
> +     if (np) {
> +             data->setup.blocking_io = of_property_read_bool(np, 
> "sensirion,blocking-io");
> +             data->setup.high_precision = !of_property_read_bool(np, 
> "sensicon,low-precision");
> +     } else {
> +             if (client->dev.platform_data)
> +                     data->setup = *(struct shtc1_platform_data 
> *)dev->platform_data;
> +     }
> +
>       shtc1_select_command(data);
>       mutex_init(&data->update_lock);
>  
> @@ -257,8 +265,19 @@ static const struct i2c_device_id shtc1_id[] = {
>  };
>  MODULE_DEVICE_TABLE(i2c, shtc1_id);
>  
> +static const struct of_device_id shtc1_of_match[] = {
> +     { .compatible = "sensirion,shtc1" },
> +     { .compatible = "sensirion,shtw1" },
> +     { .compatible = "sensirion,shtc3" },
> +     { }
> +};
> +MODULE_DEVICE_TABLE(of, shtc1_of_match);
> +
>  static struct i2c_driver shtc1_i2c_driver = {
> -     .driver.name  = "shtc1",
> +     .driver = {
> +             .name = "shtc1",
> +             .of_match_table = shtc1_of_match,
> +     },
>       .probe        = shtc1_probe,
>       .id_table     = shtc1_id,
>  };

Reply via email to