[PATCH] arm64: dts: imx8mm-beacon-baseboard: Correct LED default state

[Krzysztof Kozlowski]

There is no LED default state "none".  leds-gpio driver maps it to
"off", so correct them to fix dtbs_check warnings like:

  arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml:
    leds: led0:default-state:0: 'none' is not one of ['on', 'off', 'keep']

Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi 
b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index baa5f997d018..bf0859f1e1fa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -10,19 +10,19 @@
                led0 {
                        label = "gen_led0";
                        gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
-                       default-state = "none";
+                       default-state = "off";
                };
 
                led1 {
                        label = "gen_led1";
                        gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
-                       default-state = "none";
+                       default-state = "off";
                };
 
                led2 {
                        label = "gen_led2";
                        gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
-                       default-state = "none";
+                       default-state = "off";
                };
 
                led3 {
-- 
2.17.1