On 13-08-20, 15:07, Hector Yuan wrote:
> From: "Hector.Yuan" <[email protected]>
>
> Add MT6779 cpufreq HW support.
>
> Signed-off-by: Hector.Yuan <[email protected]>
> ---
> arch/arm64/configs/defconfig | 1 +
> drivers/cpufreq/Kconfig.arm | 11 ++
> drivers/cpufreq/Makefile | 1 +
> drivers/cpufreq/mediatek-cpufreq-hw.c | 255
> +++++++++++++++++++++++++++++++++
> 4 files changed, 268 insertions(+)
> create mode 100644 drivers/cpufreq/mediatek-cpufreq-hw.c
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 883e8ba..866a1bf 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -86,6 +86,7 @@ CONFIG_CPUFREQ_DT=y
> CONFIG_ACPI_CPPC_CPUFREQ=m
> CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=m
> CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
> +CONFIG_ARM_MEDIATEK_CPUFREQ_HW=m
What about a 'default m' in Kconfig itself ?
> CONFIG_ARM_SCPI_CPUFREQ=y
> CONFIG_ARM_IMX_CPUFREQ_DT=m
> CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index c6cbfc8..81f1cc1 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -121,6 +121,17 @@ config ARM_MEDIATEK_CPUFREQ
> help
> This adds the CPUFreq driver support for MediaTek SoCs.
>
> +config ARM_MEDIATEK_CPUFREQ_HW
> + tristate "MediaTek CPUFreq HW driver"
> + depends on ARCH_MEDIATEK || COMPILE_TEST
> + help
> + Support for the CPUFreq HW driver.
> + Some MediaTek chipsets have a HW engine to offload the steps
> + necessary for changing the frequency of the CPUs. Firmware loaded
> + in this engine exposes a programming interface to the OS.
> + The driver implements the cpufreq interface for this HW engine.
> + Say Y if you want to support CPUFreq HW.
> +
> config ARM_OMAP2PLUS_CPUFREQ
> bool "TI OMAP2+"
> depends on ARCH_OMAP2PLUS
> diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
> index f6670c4..dc1f371 100644
> --- a/drivers/cpufreq/Makefile
> +++ b/drivers/cpufreq/Makefile
> @@ -57,6 +57,7 @@ obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) +=
> imx6q-cpufreq.o
> obj-$(CONFIG_ARM_IMX_CPUFREQ_DT) += imx-cpufreq-dt.o
> obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
> obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ) += mediatek-cpufreq.o
> +obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ_HW) += mediatek-cpufreq-hw.o
> obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o
> obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
> obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
> diff --git a/drivers/cpufreq/mediatek-cpufreq-hw.c
> b/drivers/cpufreq/mediatek-cpufreq-hw.c
> new file mode 100644
> index 0000000..6752db9
> --- /dev/null
> +++ b/drivers/cpufreq/mediatek-cpufreq-hw.c
> @@ -0,0 +1,255 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020 MediaTek Inc.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/cpufreq.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/pm_opp.h>
> +#include <linux/slab.h>
> +
> +#define LUT_MAX_ENTRIES 32U
> +#define LUT_FREQ GENMASK(11, 0)
> +#define LUT_VOLT GENMASK(28, 12)
> +#define LUT_ROW_SIZE 0x4
> +
> +/* Register offsets */
> +#define REG_ENABLE 0x84
> +#define REG_PERF_STATE 0x88
> +
> +static struct platform_device *global_pdev;
Use cpufreq_driver->driver_data for this, it is already used in other
drivers for similar use.
> +static int mtk_cpufreq_hw_target_index(struct cpufreq_policy *policy,
> + unsigned int index)
> +{
> + void __iomem *perf_state_reg = policy->driver_data;
> + unsigned long freq = policy->freq_table[index].frequency;
> +
> + writel_relaxed(index, perf_state_reg);
> + arch_set_freq_scale(policy->related_cpus, freq,
> + policy->cpuinfo.max_freq);
> + return 0;
> +}
> +
> +static unsigned int mtk_cpufreq_hw_get(unsigned int cpu)
> +{
> + void __iomem *perf_state_reg;
> + struct cpufreq_policy *policy;
> + unsigned int index;
> +
> + policy = cpufreq_cpu_get_raw(cpu);
> + if (!policy)
> + return 0;
> +
> + perf_state_reg = policy->driver_data;
> +
> + index = readl_relaxed(perf_state_reg);
> + index = min(index, LUT_MAX_ENTRIES - 1);
> +
> + return policy->freq_table[index].frequency;
> +}
> +
> +static int mtk_cpufreq_hw_read_lut(struct device *cpu_dev,
This routine needs to be named better, it is creating the cpufreq
table after all.
> + struct cpufreq_policy *policy,
> + void __iomem *base)
Please make sure checkpatch --strict doesn't give any errors.
> +{
> + u32 data;
> + u32 freq, volt, prev_freq = 0;
Merge these two..
> + int i = 0;
> + struct cpufreq_frequency_table *table;
> +
> + table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL);
> + if (!table)
> + return -ENOMEM;
> +
> + for (i = 0; i < LUT_MAX_ENTRIES; i++) {
> + data = readl_relaxed(base + (i * LUT_ROW_SIZE));
> + freq = FIELD_GET(LUT_FREQ, data) * 1000;
> + volt = FIELD_GET(LUT_VOLT, data);
> + if (freq != prev_freq) {
> + table[i].frequency = freq;
> + dev_pm_opp_add(cpu_dev, freq * 1000, volt);
Why are you adding OPPs here and rather why using OPP specific stuff
at all in the driver ?
> + dev_dbg(cpu_dev, "index=%d freq=%d, volt=%d\n", i,
> + freq, volt);
> + } else {
> + break;
> + }
> + prev_freq = freq;
> + }
> + table[i].frequency = CPUFREQ_TABLE_END;
> + policy->freq_table = table;
> + dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);
> +
> + return 0;
> +}
> +
> +static void mtk_get_related_cpus(int index, struct cpumask *m)
> +{
> + struct device_node *cpu_np;
> + struct of_phandle_args args;
> + int cpu, ret;
> +
> + for_each_possible_cpu(cpu) {
> + cpu_np = of_cpu_device_node_get(cpu);
> + if (!cpu_np)
> + continue;
> +
> + ret = of_parse_phandle_with_args(cpu_np, "mtk,freq-domain",
Where are bindings of this node and how does this look ?
> + "#freq-domain-cells", 0,
> + &args);
> + of_node_put(cpu_np);
> + if (ret < 0)
> + continue;
> +
> + if (index == args.args[0])
> + cpumask_set_cpu(cpu, m);
> + }
> +}
> +
> +static int mtk_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
> +{
> + struct device *dev = &global_pdev->dev;
> + struct of_phandle_args args;
> + struct device_node *cpu_np;
> + struct device *cpu_dev;
> + struct resource *res;
> + void __iomem *base;
> + int ret, index;
> +
> + cpu_dev = get_cpu_device(policy->cpu);
> + if (!cpu_dev) {
> + pr_err("%s: failed to get cpu%d device\n", __func__,
> + policy->cpu);
> + return -ENODEV;
> + }
> +
> + cpu_np = of_cpu_device_node_get(policy->cpu);
> + if (!cpu_np)
> + return -EINVAL;
> +
> + ret = of_parse_phandle_with_args(cpu_np, "mtk,freq-domain",
> + "#freq-domain-cells", 0, &args);
> + of_node_put(cpu_np);
> + if (ret)
> + return ret;
> +
> + index = args.args[0];
> + res = platform_get_resource(global_pdev, IORESOURCE_MEM, index);
> + if (!res)
> + return -ENODEV;
> + base = devm_ioremap(dev, res->start, resource_size(res));
> + if (!base)
> + return -ENOMEM;
> +
> + mtk_get_related_cpus(index, policy->cpus);
> + if (!cpumask_weight(policy->cpus)) {
> + dev_err(dev, "Domain-%d failed to get related CPUs\n", index);
> + ret = -ENOENT;
> + goto error;
> + }
> +
> + policy->driver_data = base + REG_PERF_STATE;
> + ret = mtk_cpufreq_hw_read_lut(cpu_dev, policy, base);
> + if (ret) {
> + dev_err(dev, "Domain-%d failed to read LUT\n", index);
> + goto error;
> + }
> +
> + ret = dev_pm_opp_get_opp_count(cpu_dev);
> + if (ret <= 0) {
> + dev_err(cpu_dev, "Failed to add OPPs\n");
> + ret = -ENODEV;
> + goto error;
> + }
> +
> + dev_pm_opp_of_register_em(policy->cpus);
> +
> + /* HW should be in enabled state to proceed now */
> + writel_relaxed(0x1, (base + REG_ENABLE));
> + return 0;
> +error:
> + devm_iounmap(dev, base);
> + return ret;
> +}
> +
> +static int mtk_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
> +{
> + struct device *cpu_dev = get_cpu_device(policy->cpu);
> + void __iomem *base = policy->driver_data - REG_PERF_STATE;
> +
> + dev_pm_opp_remove_all_dynamic(cpu_dev);
> + kfree(policy->freq_table);
> + devm_iounmap(&global_pdev->dev, base);
> +
> + return 0;
> +}
> +
> +static struct freq_attr *mtk_cpufreq_hw_attr[] = {
> + &cpufreq_freq_attr_scaling_available_freqs,
> + NULL
> +};
> +
> +static struct cpufreq_driver cpufreq_mtk_hw_driver = {
> + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
> + CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
> + .verify = cpufreq_generic_frequency_table_verify,
> + .target_index = mtk_cpufreq_hw_target_index,
> + .get = mtk_cpufreq_hw_get,
> + .init = mtk_cpufreq_hw_cpu_init,
> + .exit = mtk_cpufreq_hw_cpu_exit,
> + .name = "mtk-cpufreq-hw",
> + .attr = mtk_cpufreq_hw_attr,
> +};
> +
> +static int mtk_cpufreq_hw_driver_probe(struct platform_device *pdev)
> +{
> + int ret;
> +
> + global_pdev = pdev;
> + ret = cpufreq_register_driver(&cpufreq_mtk_hw_driver);
> + if (ret)
> + dev_err(&pdev->dev, "CPUFreq HW driver failed to register\n");
> + else
> + dev_dbg(&pdev->dev, "mtk CPUFreq HW driver initialized\n");
> +
> + return ret;
> +}
> +
> +static int mtk_cpufreq_hw_driver_remove(struct platform_device *pdev)
> +{
> + return cpufreq_unregister_driver(&cpufreq_mtk_hw_driver);
> +}
> +
> +static const struct of_device_id mtk_cpufreq_hw_match[] = {
> + { .compatible = "mediatek,cpufreq-hw" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, mtk_cpufreq_hw_match);
> +
> +static struct platform_driver mtk_cpufreq_hw_driver = {
> + .probe = mtk_cpufreq_hw_driver_probe,
> + .remove = mtk_cpufreq_hw_driver_remove,
> + .driver = {
> + .name = "mtk-cpufreq-hw",
> + .of_match_table = mtk_cpufreq_hw_match,
> + },
> +};
> +
> +static int __init mtk_cpufreq_hw_init(void)
> +{
> + return platform_driver_register(&mtk_cpufreq_hw_driver);
> +}
> +postcore_initcall(mtk_cpufreq_hw_init);
> +
> +static void __exit mtk_cpufreq_hw_exit(void)
> +{
> + platform_driver_unregister(&mtk_cpufreq_hw_driver);
> +}
> +module_exit(mtk_cpufreq_hw_exit);
> +
> +MODULE_DESCRIPTION("mtk CPUFREQ HW Driver");
> +MODULE_LICENSE("GPL v2");
> --
> 1.7.9.5
--
viresh
