Controller version 0x0002450D has USB2 PHY RX sensitivity issues
that needs to be worked around by enabling phyrst-a-enable bit
in PHYRST_CFG register.

There is no way to distinguish between the controller version
before the device controller is started so we need to add this
DT property.

Signed-off-by: Roger Quadros <rog...@ti.com>
---
 Documentation/devicetree/bindings/usb/cdns,usb3.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml 
b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
index 7bc0263accee..e670adc955e1 100644
--- a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
+++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -58,6 +58,10 @@ properties:
       buffers expressed in KB
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  cdns,phyrst-a-enable:
+    description: Enable resetting of PHY if Rx fail is detected
+    type: boolean
+
 required:
   - compatible
   - reg
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Reply via email to