Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Hans de Goede <[email protected]> --- Changes since v1: 1. Remove unneeded PTR_ERR_OR_ZERO, as pointed by Andy. --- drivers/input/touchscreen/bu21013_ts.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c index 2f1f0d7607f8..86bd38243d6c 100644 --- a/drivers/input/touchscreen/bu21013_ts.c +++ b/drivers/input/touchscreen/bu21013_ts.c @@ -496,12 +496,10 @@ static int bu21013_probe(struct i2c_client *client, /* Named "CS" on the chip, DT binding is "reset" */ ts->cs_gpiod = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH); - error = PTR_ERR_OR_ZERO(ts->cs_gpiod); - if (error) { - if (error != -EPROBE_DEFER) - dev_err(&client->dev, "failed to get CS GPIO\n"); - return error; - } + if (IS_ERR(ts->cs_gpiod)) + return dev_err_probe(&client->dev, PTR_ERR(ts->cs_gpiod), + "failed to get CS GPIO\n"); + gpiod_set_consumer_name(ts->cs_gpiod, "BU21013 CS"); error = devm_add_action_or_reset(&client->dev, @@ -516,11 +514,8 @@ static int bu21013_probe(struct i2c_client *client, ts->int_gpiod = devm_gpiod_get_optional(&client->dev, "touch", GPIOD_IN); error = PTR_ERR_OR_ZERO(ts->int_gpiod); - if (error) { - if (error != -EPROBE_DEFER) - dev_err(&client->dev, "failed to get INT GPIO\n"); - return error; - } + if (error) + return dev_err_probe(&client->dev, error, "failed to get INT GPIO\n"); if (ts->int_gpiod) gpiod_set_consumer_name(ts->int_gpiod, "BU21013 INT"); -- 2.17.1
