Hi Cameron, Increase the version number for each new patch serie.
git format-patch -v4 -4 HEAD In a previous comment I gave a sort example. However, this patch serie is about usb3, so only touch the things related to usb3 and leave the &uart2 node (legacy ;) ) untouched. Improve the way in which your patches are send. Your previous serie was incomplete. Submit all patches with the same news server (Gmail for example) that can handle plain text, because else you get 2 different Message-Ids: <[email protected]> <[email protected]> git send-email --suppress-cc all --annotate --to <..> --cc <..> <patch1 patch2> Not sure how robh filters patches, but your serie 'must' show up in the link below or else wait for an eternity to get a ack-by. https://patchwork.ozlabs.org/project/devicetree-bindings/list/ On 8/26/20 7:12 PM, [email protected] wrote: > From: Cameron Nemo <[email protected]> > > Enable USB3 nodes for the rk3328-based PINE Rock64 board. > > Signed-off-by: Heiko Stuebner <[email protected]> > Signed-off-by: Cameron Nemo <[email protected]> > --- > arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 17 +++++++++++++---- > 1 file changed, 13 insertions(+), 4 deletions(-) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts > b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts > index 86cfb5c50a94..82c27eab6a52 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts > +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts > @@ -363,10 +363,6 @@ &tsadc { > status = "okay"; > }; > > -&uart2 { > - status = "okay"; > -}; > - > &u2phy { > status = "okay"; > > @@ -379,11 +375,24 @@ u2phy_otg: otg-port { > }; > }; > > +&uart2 { > + status = "okay"; > +}; > + Don't touch/change. > &usb20_otg { > dr_mode = "host"; > status = "okay"; > }; > > +&usbdrd3 { > + status = "okay"; > +}; > + > +&usbdrd_dwc3 { > + dr_mode = "host"; > + status = "okay"; > +}; > + > &usb_host0_ehci { > status = "okay"; > }; >
