[PATCH net-next 2/3] net: dsa: bcm_sf2: request and handle clocks

[Florian Fainelli]

Fetch the corresponding clock resource and enable/disable it during
suspend/resume if and only if we have no ports defined for Wake-on-LAN.

Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
 drivers/net/dsa/bcm_sf2.c | 20 ++++++++++++++++++--
 drivers/net/dsa/bcm_sf2.h |  2 ++
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index bafddb35f3a9..b8fa0a46c5c9 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -14,6 +14,7 @@
 #include <linux/phy_fixed.h>
 #include <linux/phylink.h>
 #include <linux/mii.h>
+#include <linux/clk.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
@@ -750,6 +751,9 @@ static int bcm_sf2_sw_suspend(struct dsa_switch *ds)
                        bcm_sf2_port_disable(ds, port);
        }
 
+       if (!priv->wol_ports_mask)
+               clk_disable_unprepare(priv->clk);
+
        return 0;
 }
 
@@ -758,6 +762,9 @@ static int bcm_sf2_sw_resume(struct dsa_switch *ds)
        struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
        int ret;
 
+       if (!priv->wol_ports_mask)
+               clk_prepare_enable(priv->clk);
+
        ret = bcm_sf2_sw_rst(priv);
        if (ret) {
                pr_err("%s: failed to software reset switch\n", __func__);
@@ -1189,10 +1196,16 @@ static int bcm_sf2_sw_probe(struct platform_device 
*pdev)
                base++;
        }
 
+       priv->clk = devm_clk_get_optional(&pdev->dev, "sw_switch");
+       if (IS_ERR(priv->clk))
+               return PTR_ERR(priv->clk);
+
+       clk_prepare_enable(priv->clk);
+
        ret = bcm_sf2_sw_rst(priv);
        if (ret) {
                pr_err("unable to software reset switch: %d\n", ret);
-               return ret;
+               goto out_clk;
        }
 
        bcm_sf2_gphy_enable_set(priv->dev->ds, true);
@@ -1200,7 +1213,7 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
        ret = bcm_sf2_mdio_register(ds);
        if (ret) {
                pr_err("failed to register MDIO bus\n");
-               return ret;
+               goto out_clk;
        }
 
        bcm_sf2_gphy_enable_set(priv->dev->ds, false);
@@ -1267,6 +1280,8 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
 
 out_mdio:
        bcm_sf2_mdio_unregister(priv);
+out_clk:
+       clk_disable_unprepare(priv->clk);
        return ret;
 }
 
@@ -1280,6 +1295,7 @@ static int bcm_sf2_sw_remove(struct platform_device *pdev)
        dsa_unregister_switch(priv->dev->ds);
        bcm_sf2_cfp_exit(priv->dev->ds);
        bcm_sf2_mdio_unregister(priv);
+       clk_disable_unprepare(priv->clk);
        if (priv->type == BCM7278_DEVICE_ID && !IS_ERR(priv->rcdev))
                reset_control_assert(priv->rcdev);
 
diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h
index de386dd96d66..6dd69922e3f6 100644
--- a/drivers/net/dsa/bcm_sf2.h
+++ b/drivers/net/dsa/bcm_sf2.h
@@ -93,6 +93,8 @@ struct bcm_sf2_priv {
        /* Mask of ports enabled for Wake-on-LAN */
        u32                             wol_ports_mask;
 
+       struct clk                      *clk;
+
        /* MoCA port location */
        int                             moca_port;
 
-- 
2.25.1