Thanks Stephen for your time for review!!!
On 9/1/2020 1:06 PM, Stephen Boyd wrote:
Quoting Srinivasa Rao Mandadapu (2020-08-30 23:39:22)
diff --git a/sound/soc/qcom/lpass-hdmi.c b/sound/soc/qcom/lpass-hdmi.c
new file mode 100644
index 0000000..7e18113
--- /dev/null
+++ b/sound/soc/qcom/lpass-hdmi.c
@@ -0,0 +1,684 @@
+// SPDX-License-Identifier: GPL-2.0-only
[...]
+
+static int lpass_hdmi_daiops_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
[...]
+ data_format = LPASS_DATA_FORMAT_LINEAR;
+ ch_sts_buf0 = (((data_format << LPASS_DATA_FORMAT_SHIFT) &
LPASS_DATA_FORMAT_MASK)
+ | ((sampling_freq << LPASS_FREQ_BIT_SHIFT) &
LPASS_FREQ_BIT_MASK));
+ ch_sts_buf1 = (word_length) & LPASS_WORDLENGTH_MASK;
+
+ ret = regmap_field_write(drvdata->tx_ctl->soft_reset,
LPASS_TX_CTL_RESET);
+ if (ret) {
+ dev_err(dai->dev, "%s error writing to softreset enable : %d\n",
All of these strings bloat the kernel image. Can we just return ret
instead and if something goes wrong we can use a debug patch to figure
out which register write failed? Would a register write even fail to
begin with?
Will remove wherever possible.
+ __func__, ret);
+ return ret;
+ }
+
+ ret = regmap_field_write(drvdata->tx_ctl->soft_reset,
LPASS_TX_CTL_CLEAR);
+ if (ret) {
+ dev_err(dai->dev, "%s error writing to softreset disable :
%d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ ret = regmap_field_write(drvdata->legacy->legacy_en,
+ LPASS_HDMITX_LEGACY_DISABLE);
+ if (ret) {
+ dev_err(dai->dev, "%s error writing to legacy_en field : %d\n",
+ __func__, ret);
+ return ret;
+ }
+
[...]
#define LPAIF_DMACTL_REG(v, chan, dir) __LPAIF_DMA_REG(v, chan, dir, CTL)
#define LPAIF_DMABASE_REG(v, chan, dir) __LPAIF_DMA_REG(v, chan, dir, BASE)
diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
index df692ed..607f4c4 100644
--- a/sound/soc/qcom/lpass-platform.c
+++ b/sound/soc/qcom/lpass-platform.c
@@ -553,7 +702,21 @@ static irqreturn_t lpass_platform_lpaif_irq(int irq, void
*data)
/* Handle per channel interrupts */
for (chan = 0; chan < LPASS_MAX_DMA_CHANNELS; chan++) {
- if (irqs & LPAIF_IRQ_ALL(chan) && drvdata->substream[chan]) {
+ switch (v->id) {
+ case HDMI_INTERFACE:
+ val = LPAIF_IRQ_HDMI_REQ_ON_PRELOAD(chan) |
+ LPAIF_IRQ_HDMI_METADONE |
+ LPAIF_IRQ_HDMI_SDEEP_AUD_DIS(chan);
+ break;
+ case I2S_INTERFACE:
+ val = 0;
+ break;
+ default:
+ pr_err("%s: invalid %d interface\n", __func__, v->id);
Any reason we can't use dev_err() here?
It's interrupt handler. Here dev variable is not available.
So we shall remove print as per your previous comment or keep as it is.
+ return -EINVAL;
+ }
+ if (irqs & (LPAIF_IRQ_ALL(chan) | val)
+ && drvdata->substream[chan]) {
rv = lpass_dma_interrupt_handler(
drvdata->substream[chan],
drvdata, chan, irqs);
@@ -644,15 +807,15 @@ int asoc_qcom_lpass_platform_register(struct
platform_device *pdev)
/* ensure audio hardware is disabled */
ret = regmap_write(drvdata->lpaif_map,
- LPAIF_IRQEN_REG(v, LPAIF_IRQ_PORT_HOST), 0);
+ IRQ_EN(v, LPAIF_IRQ_PORT_HOST), 0);
if (ret) {
dev_err(&pdev->dev, "error writing to irqen reg: %d\n", ret);
return ret;
}
ret = devm_request_irq(&pdev->dev, drvdata->lpaif_irq,
- lpass_platform_lpaif_irq, IRQF_TRIGGER_RISING,
- "lpass-irq-lpaif", drvdata);
+ lpass_platform_lpaif_irq, IRQF_TRIGGER_RISING,
Can we use the irq flags from the firmware, i.e. whatever the DT or ACPI
tables say?
okay.
+ pdev->name, drvdata);
if (ret) {
dev_err(&pdev->dev, "irq request failed: %d\n", ret);
return ret;
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
