Hi,

Mauro Carvalho Chehab <mchehab+hua...@kernel.org> writes:
>> Mauro Carvalho Chehab <mchehab+hua...@kernel.org> writes:
>> > This binding driver is needed for Hikey 970 to work,
>> > as otherwise a Serror is produced:  
>> 
>> you mentioned Serror doesn't happen anymore...
>> 
>> >     [    1.837458] SError Interrupt on CPU0, code 0xbf000002 -- SError
>> >     [    1.837462] CPU: 0 PID: 74 Comm: kworker/0:1 Not tainted 5.8.0+ #205
>> >     [    1.837463] Hardware name: HiKey970 (DT)
>> >     [    1.837465] Workqueue: events deferred_probe_work_func
>> >     [    1.837467] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--)
>> >     [    1.837468] pc : _raw_spin_unlock_irqrestore+0x18/0x50
>> >     [    1.837469] lr : regmap_unlock_spinlock+0x14/0x20
>> >     [    1.837470] sp : ffff8000124dba60
>> >     [    1.837471] x29: ffff8000124dba60 x28: 0000000000000000
>> >     [    1.837474] x27: ffff0001b7e854c8 x26: ffff80001204ea18
>> >     [    1.837476] x25: 0000000000000005 x24: ffff800011f918f8
>> >     [    1.837479] x23: ffff800011fbb588 x22: ffff0001b7e40e00
>> >     [    1.837481] x21: 0000000000000100 x20: 0000000000000000
>> >     [    1.837483] x19: ffff0001b767ec00 x18: 00000000ff10c000
>> >     [    1.837485] x17: 0000000000000002 x16: 0000b0740fdb9950
>> >     [    1.837488] x15: ffff8000116c1198 x14: ffffffffffffffff
>> >     [    1.837490] x13: 0000000000000030 x12: 0101010101010101
>> >     [    1.837493] x11: 0000000000000020 x10: ffff0001bf17d130
>> >     [    1.837495] x9 : 0000000000000000 x8 : ffff0001b6938080
>> >     [    1.837497] x7 : 0000000000000000 x6 : 000000000000003f
>> >     [    1.837500] x5 : 0000000000000000 x4 : 0000000000000000
>> >     [    1.837502] x3 : ffff80001096a880 x2 : 0000000000000000
>> >     [    1.837505] x1 : ffff0001b7e40e00 x0 : 0000000100000001
>> >     [    1.837507] Kernel panic - not syncing: Asynchronous SError 
>> > Interrupt
>> >     [    1.837509] CPU: 0 PID: 74 Comm: kworker/0:1 Not tainted 5.8.0+ #205
>> >     [    1.837510] Hardware name: HiKey970 (DT)
>> >     [    1.837511] Workqueue: events deferred_probe_work_func
>> >     [    1.837513] Call trace:
>> >     [    1.837514]  dump_backtrace+0x0/0x1e0
>> >     [    1.837515]  show_stack+0x18/0x24
>> >     [    1.837516]  dump_stack+0xc0/0x11c
>> >     [    1.837517]  panic+0x15c/0x324
>> >     [    1.837518]  nmi_panic+0x8c/0x90
>> >     [    1.837519]  arm64_serror_panic+0x78/0x84
>> >     [    1.837520]  do_serror+0x158/0x15c
>> >     [    1.837521]  el1_error+0x84/0x100
>> >     [    1.837522]  _raw_spin_unlock_irqrestore+0x18/0x50
>> >     [    1.837523]  regmap_write+0x58/0x80
>> >     [    1.837524]  hi3660_reset_deassert+0x28/0x34
>> >     [    1.837526]  reset_control_deassert+0x50/0x260
>> >     [    1.837527]  reset_control_deassert+0xf4/0x260
>> >     [    1.837528]  dwc3_probe+0x5dc/0xe6c
>> >     [    1.837529]  platform_drv_probe+0x54/0xb0
>> >     [    1.837530]  really_probe+0xe0/0x490
>> >     [    1.837531]  driver_probe_device+0xf4/0x160
>> >     [    1.837532]  __device_attach_driver+0x8c/0x114
>> >     [    1.837533]  bus_for_each_drv+0x78/0xcc
>> >     [    1.837534]  __device_attach+0x108/0x1a0
>> >     [    1.837535]  device_initial_probe+0x14/0x20
>> >     [    1.837537]  bus_probe_device+0x98/0xa0
>> >     [    1.837538]  deferred_probe_work_func+0x88/0xe0
>> >     [    1.837539]  process_one_work+0x1cc/0x350
>> >     [    1.837540]  worker_thread+0x2c0/0x470
>> >     [    1.837541]  kthread+0x154/0x160
>> >     [    1.837542]  ret_from_fork+0x10/0x30
>> >     [    1.837569] SMP: stopping secondary CPUs
>> >     [    1.837570] Kernel Offset: 0x1d0000 from 0xffff800010000000
>> >     [    1.837571] PHYS_OFFSET: 0x0
>> >     [    1.837572] CPU features: 0x240002,20882004
>> >     [    1.837573] Memory Limit: none  
>> 
>> is this splat still valid? 
>
> What I tried to say, is that, if the dwc3 is described this way at the
> DT bindings:
>
>
>     / {
>       dwc3: dwc3@ff100000 {
>               compatible = "snps,dwc3";
>               reg = <0x0 0xff100000 0x0 0x100000>;
>               clocks = <&crg_ctrl HI3670_CLK_GATE_ABB_USB>,
>                          <&crg_ctrl HI3670_HCLK_GATE_USB3OTG>,
>                          <&crg_ctrl HI3670_CLK_GATE_USB3OTG_REF>,
>                          <&crg_ctrl HI3670_ACLK_GATE_USB3DVFS>;
>     ...
>
> The panic occurs, with the logs posted at the patch.
>
> The fix is to use dwc3-of-simple to initialize the clocks earlier,
> e. g., using this binding:
>
>     / {
>       usb3: hisi_dwc3 {
>               compatible = "hisilicon,kirin970-dwc3";
>               #address-cells = <2>;
>               #size-cells = <2>;
>               ranges;
>  
>               clocks = <&crg_ctrl HI3670_CLK_GATE_ABB_USB>,
>                          <&crg_ctrl HI3670_HCLK_GATE_USB3OTG>,
>                          <&crg_ctrl HI3670_CLK_GATE_USB3OTG_REF>,
>                          <&crg_ctrl HI3670_ACLK_GATE_USB3DVFS>;
>
>
>               dwc3: dwc3@ff100000 {
>                               compatible = "snps,dwc3";
>                               teg = <0x0 0xff100000 0x0 0x100000>;
>     ...

now it's clear, I'll apply as is :-)

-- 
balbi

Attachment: signature.asc
Description: PGP signature

Reply via email to